Where is the headphone mode set for the Apple 6 that doesn t want to use?

Apple mobile phone settings are not headphone mode, Apple display headphone mode is because the system detects that the user has inserted the headphone, if you do not plug in the headphone, display the headphone mode, then there is a problem with the headphone interface, you can turn off the phone with a cotton swab dipped in alcohol to clean, pay attention when cleaning, the alcohol is not too much, after cleaning, use a hair dryer to dry and turn on, if it is still headphone mode, it is recommended to go to a professional repair shop for testing and maintenance.

iPhone6 Headphone Mode Exit Steps:

1. When the earphones are plugged in, you can judge the headphone mode through the icon in the upper right corner of the screen.

2. Under normal circumstances, if you want to exit the "headphone mode", you only need to unplug the headphones.

3. If you unplug the earphones and still don't quit, you can try to restart the phone.

4. If none of the above operations can be solved, you can send it to the mobile phone repair office for inspection.

How to exit the headset mode of the Apple phone: 1. Set the audio copy call mode. Go to Settings > General > Accessibility > Audio Calling Methods, tap Automatic.

2. Check the headphone jack. Unplug the earphones in the power-off state, check and clean the dust inside the earphone jack, and then turn them back on. 3. Restore factory settings.

Back up your personal data on your iPhone and restore your iPhone to its factory state. Fourth, hardware failure. If the problem is not solved after eliminating the above problems, it may also be caused by hardware failure.

1. Rotate the earphones back and forth and pull them out to exit the earphone mode.

2. If method 1 is not successful, turn off the phone first and then turn it on to see if it can successfully turn off the headphone mode.

3. Another reason why the headphone mode can't be withdrawn is because the headphone jack is blocked by something. Solution: Use a cotton swab and a small paper ball to rotate into the headphone jack to get the foreign object out.

4. If you still can't bring it back, you can choose to restore the factory settings of the iphone6 phone, and enter [Settings], [General], [Restore], and [Erase All Content and Settings] on the iPhone6 phone in turn.

You can do it as follows:

1. If the phone has not been dropped or flooded, it is basically a setting problem. Go to Phone Settings - General - Accessibility.

2. Select the audio call method.

3. Select a speaker.

4. Simplify or restore all settings.

There are basically three reasons why iphoen6 keeps showing "headphone mode".

1 Setup Problem 2 Water ingress into the headphone jack 3 The headphone module is damaged.

If the phone has not been dropped or flooded, it is basically a setting problem.

Specific steps: 1 Go to Phone Settings - General - Accessibility Functions.

2 For audio calls, select Speakers.

<>3 Or you can restore all your data and re-enter your password.

If the phone has been flooded, it is a problem with the shrapnel of the headphone jack, you can try the method.

1. Pat the head of the phone first, throw out the excess water, and blow the headphone jack.

2. Plug in the earphones, turn and unplug repeatedly, and repeat several times.

3. Rub it into small strips with a paper towel, insert it into the headphone jack, and wipe off the debris.

If it doesn't work, it's a problem with the headphone jack, and it is recommended to replace it.

The above-mentioned brand slippery dust model mobile phone enters the headphone mode, you can try to exit the headphone mode in the following ways:

1. Quickly plug and unplug the earphones multiple times until the mobile phone disables the earphone mode;

2. Dip a cotton swab in alcohol, rotate and wipe the earphone plug and mobile phone jack, and then plug and unplug the earphone, which may make the mobile phone out of the earphone mode;

3. Insert the earphone into the corresponding mobile phone interface, open the mobile phone software, then click the "pause" button, click the "home" button to return to the mobile phone operation page, turn off the mobile phone and pull out the earphone.

4. If none of the above methods can make the mobile phone out of the earphone mode, it is recommended to go to the mobile phone after-sales service outlets for testing and maintenance operations.

Open the Apple phone Settings - General - Accessibility - Enter the audio call mode, and select the "Automatic" audio call mode.

Operation steps: The headphone mode of the Apple mobile phone can't be switched, first try to reinsert the earphones on the Apple phone, and then repeatedly plug in the headphone mode a few times, and the headphone mode will automatically fall back.

2.Open the Apple phone Settings - General - Accessibility - Enter the audio call mode, and select the "Automatic" audio call mode.

3.If the above methods don't work, then turn off the Apple phone and restart it, and sometimes you can switch the Apple phone headphone mode back when you turn it off and restart it.

4.There may be foreign objects running into the headphone jack at the bottom of the Apple mobile phone, please carefully check whether there is any foreign object in the earphone jack of the Apple mobile phone, take a small cotton swab and clean up the foreign objects in the earphone jack, and see if you can switch back after cleaning?

5.If the phone still hasn't switched back, there may be a problem with the phone system, please restore the factory settings of the Apple phone, and enter [Settings], [General], [Restore], [Erase All Content and Settings] on the Apple phone, attention; Back up the data on your phone when you restore the factory settings to avoid loss.

6.If there is still no sound, you can contact the after-sales repair of the Apple mobile phone and go to the service center to check whether the mobile phone is caused by hardware problems.

If you don't plug in the headphones, you will be shown the headphone mode, and you will be taught to do it yourself in a few minutes.

First of all, it seems that if there is no sound in electricity, it is to enter the headphone mode.

The solutions are as follows.

1 Settings - General - Accessibility - Incoming Call Use in Physical Activity (Default).

2. Use the headphone access interface of the iphone, turn on the iPod to listen**, then press pause, press the home button to return, turn off the iphone (without using other third-party software), pull out the earphones, and then turn on the phone, it can be solved, if you don't succeed in trying a few more times, it still doesn't work, long press power home for a hard restart, and then when the white apple appears, pull out the earphones.

3We can simulate the action of listening to **, but this time when unplugging the headphones, don't be too fast, and gently rotate and unplug them. Sometimes unplug it too quickly, and the phone's program doesn't respond. So keep the headphone mode all the time.

4. In the shutdown state, we unplug the earphones, find a needle, and gently poke the earphone hole twice, it may be that when the earphones are unplugged, the bouncing device inside does not return to its original position, we wrap the toilet paper with the needle after poking, wipe the inner wall of the earphone hole, and wipe off the dust covering it.

5 If the above methods are not possible, we can try to restore the factory settings, but this step, you have to back up the data on your phone.

6. It's not okay, it's a hardware problem and send it for repair.

1. There is no place to debug the headphone mode, it is automatically switched, the headphone plug-in is the headphone mode, and the unplugging mode will disappear automatically.

2. If the earphones are unplugged and the earphone mark is still displayed, you can try to quickly plug and unplug the earphones or restart the phone several times.

3. If the display headphone mode should be caused by the failure of the micro switch of the headphone jack, that is, the headset has been pulled out, but the switch has not been disconnected in time, 4, if the above methods do not work, it is necessary to take the Apple after-sales service outlets for testing, repair or replace the new headphone jack.

1. The headphone mode does not need to be set, it is generally switched automatically, after the headset is plugged in, it becomes the headphone mode, and the headphone mode disappears automatically after the earphone is pulled out.

2. If the earbuds are unplugged and the headphones still show the headphone mode, you can try to quickly plug and unplug the earphones several times or you can try to restart the phone.

3. The earphone has been unplugged, but the switch is not disconnected in time, and the earphone mode will be displayed. It may be caused by the failure of the micro switch of the headphone jack.

4. If there is still a problem with the headphone jack, it is recommended to take it for after-sales maintenance.

Adjust the settings.

Plug in the headphones and unplug them.

Wipe the dust off the headphone jack.

Gently poke the headphone jack with a needle.

Factory reset.

Repair operation method:

Settings - General - Accessibility - Use of incoming calls in physical activity.

Use the iPhone's headphone access interface, turn on the iPod to listen**, then press pause, press the home button to return, turn off the iPhone, pull out the headphones, and then turn on, it can be solved, if you don't succeed in trying a few more times, it still doesn't work, long press Power Home to hard restart, and then when the white apple appears, pull out the headphones.

You can simulate the action of listening to **, but this time when you unplug the headphones, don't be too fast, and gently rotate and unplug them. Sometimes I unplug it too quickly, and the program of the phone does not respond, so I keep the headphone mode all the time.

Unplug the headphones in the shutdown state, find a needle, and gently poke the headphone hole twice, it may be that when the earphones are unplugged, the bouncing device inside does not return to its original position, after poking, wrap the toilet paper with the needle, wipe the inner wall of the headphone hole, and wipe off the dust covering it.

Factory reset.

Hardware problems are taken for repair.

Answer 1: In general, this is caused by the dampness of the mobile phone or the water entering the headphone jack, try to throw out the water in the earpiece, and then gently screw in the water with a cotton swab, and then use the hair dryer to turn on the hot air on low gear to slowly dry the remaining moisture, and restart the mobile phone;

2. It may also be due to poor contact in the headphone jack of the mobile phone, or it may be caused by foreign objects inside, use a cotton swab or paper towel to clean it up;

3. If it still can't be solved after cleaning, it may be caused by the failure of the headphone jack, and it is recommended to take the mobile phone to the after-sales maintenance point for inspection and repair.