-
Hi! This is the battery hibernating. Please connect the charger for about half an hour, and it can be turned on.
-
1. The phone may have entered a dormant state, please connect the computer and the phone with a data cable for 30 minutes to activate. It is recommended not to automatically shut down the battery after it is depleted, over-discharge may cause the battery to sleep.
2. Press and hold the power button for about 10 seconds to try to turn it on.
3. In the shutdown state, press and hold the volume plus button and the shutdown button, and let go when the boot screen appears.
It can be fully charged in more than 1 hour, so you just need to fully charge your phone. Now all lithium batteries are used, unlike the nickel-metal hydride batteries used before, which have a memory effect, so there is no need to charge for 12 hours.
-
Mine is like this, this is not charged at all, I dismantled and threw it away and put it back on after 10 days. This is caused by you turning on the charge or the power is not used up for a while, and you pull it out before it is full, and this is caused repeatedly. If there are other batteries, use other batteries first, leave this battery idle for a period of time, and then use it may be good, if it is not good, then this battery is wasted, there is no other way, the machine is absolutely no problem.
-
Did you run out of power before charging? Then it should be the battery dormancy, send it to the after-sales inspection to solve it!
-
Hello. When the phone won't turn on, can't charge and flashes a red light, it's time for the battery to sleep. Solution: The battery is dormant, please use the universal charge to charge the battery to try (Mi 3 can not use this method), or connect to the computer to charge for half an hour to turn on and try, if it still doesn't work, please go to Mi Home to activate the battery Mi Home.
Authorized repairer outlets.
-
Because the last time you had a completely dead battery. The remaining power is not enough to turn on the machine, and that's it. It will be back to normal after about 10 minutes of charging. By the way, lithium batteries are the most taboo to overcharge and overdischarge, which may cause the battery to hang up, so don't wait until it's out of power before charging.
-
How it works:
1.First of all, you can try to connect the computer with a data cable and charge it for 30 minutes to see if it can be turned on, if it still can't, then try the next method.
2.Replace a battery with more than 50% power to turn it on, wait until the normal boot is completed before turning it off, and then replace the previous battery, try it.
3.In or when the power is off, press and hold the volume plus key and the power off button, and let go when the boot screen appears, and you can enter recovery. Go to Recovery>Chinese >> Clear Data" to clear all data, if it still can't solve the problem, then find a professional to inquire and repair it!
-
In this case, the mobile phone is generally out of power, after the automatic shutdown, the mobile phone will leave 3% of the power, which is used to save the information of the motherboard, at this time it cannot be turned on, and the indicator light is red. When the battery continues to charge and the power reaches more than 30, the light will turn yellow, and there will be no problem when it is turned on. It is recommended that you do not use your phone after the battery is lower than 10.
-
Hello. The battery is dormant, it is recommended that you go to a Xiaomi authorized service point for testing and repair. Check the address of your local Xiaomi authorized repair point.
-
Indicates that the battery has no charge. May not have good contact.
Dear, your note battery is broken.
If the phone automatically shuts down due to low battery, it may not turn on and the LED light flashes when the charger is just plugged in, it is recommended that you try to turn it on again after charging for 15-30 minutes.
1. There is no prompt for the phone to be completely out of power and then charged, because the power is too low to turn on. >>>More
Line brush treasure is an Android smart line brush tool, supporting most of the Android mobile phone brands and models on the market,。 The line brush treasure is not only easy to use, but also provides a large number of flashing packages** and a complete flashing tutorial, one-stop service allows you to easily solve the problem that the mobile phone cannot be turned on! >>>More
Then choose the most violent method to unlock with the empty data method, but all the internal memory files of your phone will disappear. >>>More