Redmi note3 changed the screen and won t turn on, what should I do?

Line brush treasure is an Android smart line brush tool, supporting most of the Android mobile phone brands and models on the market,。 The line brush treasure is not only easy to use, but also provides a large number of flashing packages** and a complete flashing tutorial, one-stop service allows you to easily solve the problem that the mobile phone cannot be turned on!

So how do you do it?

1. **Line brushing. 2. **Mobile phone flashing package 3, follow the flashing tutorial step by step, easy to flash! In this way, even if your phone can't turn on, or if you fail to flash, you can easily get it!

Hello dear, Redmi Note10The reasons for the failure of the boot button after replacing the screen are as follows: 1. The power button is inelastic and causes failureFirst turn off the phone, open the back cover, and remove the battery. You will find that there are 8 screws between the base and the panel, remove these 8 screws respectively and store them properly, after removing the base screws, carefully remove the base, the method is similar to opening the back cover, do not use brute force.

Remove the power plastic key We found that Xiaomi's power button is a touch reset SMD switch, intact light touch reset SMD switch has a certain elasticity, due to our operation too strong or falling, resulting in the raised contact surface of this switch flattening and losing elasticity, at this time, please use a needle or a small screwdriver to slightly provoke the contact surface of the switch, that is, restore the elasticity of the Xiaomi power button. Second, the power key is broken due to malfunction, and the power key is broken, if it is close to the maintenance point of Xiaomi Home, it is recommended to replace it directly; For users who are far away from Mi Home, you may wish to follow the above disassembly method, remove and wipe the broken power button, and then stick it with 502 or other super glue. The Redmi boot button is out of order, and the method of shutting down the finger beat is as follows:

First press and hold the +- button for volume up; Then connect the electric shengxiangyuan line to charge, and the boot logo appears white and stuck unchanged; Then press and hold the +- button to adjust the volume, quickly remove the battery and put it in immediately, the system will automatically restart to enter the flashing page; When you enter this, you can let go of the +- button to adjust the volume, and then quickly remove the battery and put it in immediately, this time don't press the volume button, the system will automatically restart and turn on.

As follows: 1. The software is incompatible, or the hardware of the mobile phone is caused. The data can be cleared (invalid is a hardware failure and needs to be sent for repair).

In the shutdown state, press and hold the volume up button and the shutdown button, and let go when the boot screen appears.

Go to Recovery >Chinese>> >> Clear Data >> Empty all data.

2. Recovery mode refers to a mode that can modify the data or system inside the Android machine, in this mode you can flash into the new Android system, or backup or upgrade the existing system, or you can restore the factory settings here.