Where is the switch for H6 Uphill Assist News

Haval H6 uphill assist.

Uphill assist. When the vehicle is starting on a steep or slippery slope, the vehicle will slide backwards when the driver switches from the brake pedal to the accelerator pedal, making it difficult to start. To prevent this from happening, Hill Start Assist temporarily (up to about 2 seconds) applies the brakes to all four wheels to prevent the vehicle from sliding.

When Hill Start Assist is not equipped, the driver must switch from the brake pedal to the accelerator pedal quickly and accurately. However, when equipped with Hill Start Assist, the driver can easily start and operate the pedals because Hill Start Assist prevents the vehicle from sliding backwards.

1 Condition. 1 (Automatic models) The gear lever is located anywhere outside P, and the manual transmission model is in the first gear position. 2 The accelerator pedal is not pressed. 3 The vehicle is stationary. 4 The parking brake is not deployed.

Under the premise of satisfying the above basic conditions, the system activates the hill assist control when the driver further presses the brake pedal when the vehicle is stopped.

2 uses. The use of the vehicle's automatic transmission assist system: when the vehicle gear is not placed in D gear (do not put it in P gear, other gears are fine), press the brake hard and hear a "beep" sound, then the hill assist system takes effect (the working time is two seconds), and the brake light will light up and automatically generate braking.

Manual Transmission Assist is used: When the vehicle starts on a steep or slippery slope, it is in the braking position for about 3 seconds, allowing the driver to calmly switch from braking to the accelerator pedal. As long as the car has this function, it does not need to be set up, everything is automatic.

It seems to be integrated into the ESP

The brake is automatically activated when pressed to the end.

Haval H6's hill assist button is on the operation panel on the left side of the vehicle's central control instrument panel, which is an icon of a car-shaped pattern driving on a slope, as long as you press this button to turn on the hill assist, the specific operation steps are as follows:

1. Press the brake pedal of the Haval H6.

2. Press the one-button start button of Haval H6.

3. The instrument of Haval H6 lights up, and the power supply of the whole car is turned on.

4. Press the uphill assist button located in the Haval H6 car to turn on the mode.

5. At this time, the Haval H6 will have the help of uphill assistance when going uphill, which will be safer.

Generally, Hill Assist is turned on by default, park the car on the slope and put it in neutral gear to release the brakes for a short stop.

The Haval H6 downhill assist does not need to be pressed by itself. The use of manual transmission assist system of the vehicle: when the vehicle starts on a steep or smooth slope, about 3 seconds is in the braking state, so that the driver can calmly change from the brake to the accelerator pedal, as long as the car has this function, there is no need to set, everything is automatic.

Haval H6 Sport automatic way to drive a long downhill:

1. If it is a manual self-integration, it can be hung into D+, which is 1st gear, and then D+ is 2nd gear. This is generally a climb and a downhill block;

2. If it is a pure automatic transmission, it will be hung to L1 or L2, which is equivalent to the 1st and 2nd gears of the manual transmission. Do not apply the brakes for a long time downhill, as this will cause the brakes to fail. Therefore, it is necessary to hang the block into the low-speed gear, so that the gearbox can force the output of low speed;

3. Therefore, whether it is manual or automatic, whether it is uphill or downhill, it must be put into low-speed gear;

4. The manual is 1st gear, the 2nd gear is the L1 gear, the L2 gear is automatically integrated into the D gear, and then push it in the D+ direction is the D1 gear, which is the manual 1st gear. Push it to D+ again and it will be D2, which is the manual 2nd gear.

1. Check the surroundings of the vehicle before getting on the bus to confirm the safety of the vehicle. Enter the cab and fasten your seatbelt;

2. Insert the key and start the vehicle;

3. Pay attention to the tachometer in the dashboard, the engine speed is generally above 1000 rpm when the cold car starts, wait for about 10 seconds, and wait for the speed to below 1000 rpm;

4. When the speed reaches below 1000 rpm, step on the brake with your right foot and put down the handbrake with your right hand;

5. Shift the gear from P gear to D gear. P is the parking gear, D is the forward gear, N gear is neutral, R gear is the reverse gear, and S gear is the manual mode. (Note that the right foot is still on the brake at this time);

When walking forward, press the brake pedal to hang the gear lever to the D position and slowly lift the brake pedal, slowly refuel the right foot, the speed is high, it will automatically upshift, the speed is low, the reverse gear is R, the neutral gear is N, and the parking is P.

Photo by Q&A) M5 Trumpchi GS8 AION V Macchiato DHT PHEV Latte DHT Hiphi X @2019