-
Buy an M2 SSDs, put the system inside.
-
Spend 100,000 to buy a new computer.
-
Disable boot startup items, add SSD, add memory, and go to high-end U
-
Buying a computer with good performance should be the most effective way to speed up the boot of the computer.
-
Solid-state drives with interfaces.
-
Simple, buy a best 500G solid state drive, install a Windows XP system to boot in seconds, and now a better mechanical hard disk is installed with XP system boot in more than ten seconds.
-
I'm currently booting up for 14 seconds.
-
The easiest and most effective is to add an SSD
-
When you encounter the third picture, you can press the esc key in the upper left corner of the keyboard a few more times.
-
Change to solid state, add memory, reduce pixels (lower resolution), add graphics card, change to E3, or E5 (high frequency)*, go to boot, delete rogue.
Note: Intel is not always supported
-
On the desktop of the computer, use the keyboard shortcut win+r to open the system's run command tool. (The win key is the key with the windows icon in the lower right corner of the keyboard) Enter the management tool to open the command, enter the "msconfig" command in the command input box and press enter to open the management tool. Disable the boot startup item, many applications are more rogue will set the boot start, right-click on the program you want to disable, and select Disable.
-
Click "Computer" - right-click - select the "Properties" command, open the "Computer System Properties" panel, there are "Control Panel Home" and other commands on the left side of the panel, select the "Advanced System Settings" command, after clicking, a "System Properties" dialog box will appear. Follow the number, select the Advanced tab, and select the Settings command in Startup and Fault Recovery to set up the startup. Set the "Boot and Failback" time to open the "Boot and Failback" dialog box, in this pair of frames, the first step is to remove the check box in front of "Show the time of the operating system list", and change the time to "0" seconds, so as to speed up the time for the computer to boot up.
Click the OK and Apply buttons to complete the operation. That's it.
-
If you graduated from a computer computer, let's talk about how to do it now, click the "Control Panel" command in the "Start" menu, open the "Control Panel" window, and click the "Administrative Tools" option in the "Icon" view mode. In the Administrative Tools window that opens, double-click the System Configuration icon. Launch the System Configuration tool and switch to the Startup tab.
In the "Startup Items" list box, all startup items will be displayed, and the redundant startup items will be unchecked. Then click the "OK" button, and click the "Restart Startup" button in the pop-up dialog box to restart the computer. If you want to restart later, you can click the Eject without restarting button.
-
Now the security software installed on the computer can help us improve the boot speed of the computer, and you can also modify the boot items of the system to optimize, if the software of the computer boot is too much, it will cause the boot to be very slow to enter the system. The interface above is in.
Start --run --msconfig
Enter opens, windows 8 is seen in the task manager. If you are familiar with the system services on your computer, you can also go one step further to improve the speed of your computer's boot up. If you know, you can disable these services that don't need to be started.
to go deeper and faster to boot up your computer. The SSD can also improve the boot speed of the computer, and setting the BIOS as the first boot of the hard disk can also speed up the boot speed of the hard disk.
-
Since 2000, I have been using computers, and I have many years of experience in the management of electronic equipment in colleges and universities. The first necessary condition to improve the boot speed of the computer, and the most effective way to improve the boot speed, isReplace the SSD. Compared with traditional mechanical hard disks, SSDs have many advantages, not only in terms of speed transmission, but also in data security, applications and computer startups, and there is no motor acceleration process, no mechanical crunching noise.
However, the disadvantage is also obvious, that is, it is higher and has a smaller capacity than the same** mechanical hard disk. I use a 256G SSD, and after finishing the system, it basically starts to stay within 10 seconds, but the computer will increase with the speed of use, which is usually more than 10 seconds.
-
You can turn on the 360 security guard, click on the optimization acceleration, optimize it, and then find the "startup item" to cancel the unwanted startup items in it, and the boot speed will become much faster, I just dealt with it, and the effect is very good.
-
If you want to improve the boot speed of your computer, you need to clean up the startup items of your computer frequently. As we install software and some rogue software is installed automatically, we will have more and more startup items, so the computer will boot up slower and slower! The problem description should be your system problem after the system boots up slowly, the general brand computer will automatically install a lot after reinstallation, the manufacturer's own service software, these software take up a lot of startup time!
How to get rid of them,First of all, our computers are installed with all kinds of security butlers,Tencent butler,We first open it and then select the computer to accelerate,If you don't know much about the computer, you can click on a scan,The housekeeper will automatically help you distinguish which are useless startup items,Advanced player selection,Startup items,Manually close invalid startup items are more effective。 Also, don't turn off your computer's drivers when manually selecting them, as this may cause your computer to fail to boot! The most severe can result in a blue screen or system crash.
-
It must be to close some unwanted boot items, optimize boot up, and clean up unused files and data regularly. Disk is distributed rationally, reasonable use can also improve a lot of performance, C disk try not to put too many things, if your disk letter is large, you can like this, C disk accounts for one-third, D disk is specially used to install software one-third, E disk is used for office. Uninstall the software you don't use, and I think that's pretty much it.
-
Make sure if it's hardware or software that slows down your computer. If it's an old computer that has been used for a long time, a mechanical hard disk! Then it is very likely that the boot speed is slower due to the aging of the hard disk.
In this case, it is best to add an SSD to increase the response speed. In terms of software, it is the system and boot items. Well,Now, there is basically a boot startup item optimization in the antivirus software,If you don't like to use this antivirus software,Then what software is recommended?,You only need to optimize the boot and junk cleanup。
Startup optimizations. Actually, you can do it through the command prompt. Change, but this is not recommended if you are not proficient in BOS.
-
Turn on my computer, see how much space there is on the local disks C and D, and move the things from the C and D disks to the E and F drives as much as possible. In the future, it is better to prefer these two plates. Then it is to clean up different software in the computer for a long time, you can open the program installation and uninstallation of the control plane, view the software that has been left unattended for a long time, and right-click to uninstall it directly.
After processing, the computer will boot up much faster.
Hello landlord, tell me to do it to ensure that it starts up quickly! I'm an XP user myself, and I'm very interested in XP startup acceleration. I've read countless optimization articles, installed XP n times, and gone through a lot of detours, but in the end, I have summed up the experience that can really optimize XP startup. >>>More
Boot speed: Right-click "My Computer - Properties", then click "Hardware" and then click "Device Manager", open "IDE ATA PATA Controller" in it (different chips are slightly different), then enter the primary and secondary IDE channels respectively, select "Advanced Settings", find the "Current Transfer Mode" as "Not applicable" here (this is the idle IDE channel), set the "Device Type" of this item to "None", and OK. >>>More
The next browser,Such as Maxthon,Don't use IE,Junk not to mention more vulnerabilities,In one is to regularly clear web cache,Browsing history,System temporary files and clear and free memory,These use software,Rabbit magic and optimization master are OK。
Spend money to find an operator to increase bandwidth.
Optimize boot speed with Optimizer.