What s going on with the Huawei phone when there is no sound when it gets into the water?

In order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

In fact, the mobile phone can be saved if it falls into water, it is best to unplug the battery immediately, after water removal and other operations, it can be used again in a few days, but what should I do if the mobile phone cannot be turned on after the water penetrates? Many people have tried the painful experience of water in the mobile phone, and the following will introduce to you the treatment steps for the mobile phone to enter the water and cannot be turned on.

Now mobile phones are more and more affecting people's lives, one of the sad things in the process of using mobile phones is that the mobile phone can not be turned on when it enters the water, and there are often people who shake their hands and drop the mobile phone into the water, I believe that this problem is a problem that mobile phone users have encountered. Don't panic, there is still a remedy, below, I will explain to you the solution skills of the mobile phone that cannot be turned on when it gets into the water.

What should I do if my phone can't be turned on when water gets in.

After picking up the phone, remove the phone battery as soon as possible.

Unable to turn on Diagram-1

Use an undusted napkin or cotton ball to blot all the water outside your phone that can be wiped off.

If you drop it into clean water, you can clean the phone with anhydrous alcohol, and the alcohol will volatilize quickly and volatilize the water on the circuit board. If it falls into the sewage, it should be cleaned immediately, and after the visible dirt is cleaned, the impurities attached to the pins of the component should be brushed off with anhydrous alcohol.

Mobile phone water inlet diagram-2

After disposing of the water that can be wiped dry, use the hair dryer to swing the phone to dry it from a distance.

Put the phone in a cool and dry place to dry for 2 days, and then turn it on to see if it can be turned on.

How to properly dispose of your phone after it gets water:

There are 3 types of situations:

1. Drop into clean water when the power is on;

2. In the case of power failure, it falls into non-corrosive liquid;

3. Fall into non-clean water when energized, or corrosive liquid or viscous liquid or other unclean liquid regardless of whether it is energized or not.

Here are some recommendations for all three of these situations:

1. Drop into clean water when the power is on, this situation generally does not need to be disassembled.

1.Turn off the power as soon as possible.

2.Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3.Place under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry. Blow it and it's over.

After these three steps of processing, the power supply can basically work normally.

2. Drop into non-corrosive liquid in the case of power failure.

1.Shake it dry, but don't shake it off.

2.If there is no trace on the LCD screen, it shall be processed according to Article 3 of the first point.

3.If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

Those with poor hands-on ability are still repaired by professionals. )

3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not.

1 Power off as soon as possible.

2 If it falls into corrosive liquid (e.g. seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

3 Disassemble the machine as soon as possible. But take your time when disassembling the machine.

4 Clean with alcohol or professional washing water.

5 Assemble. Or take the dismantled items to the repair point. Let the repair point be cleaned and assembled again.

Dry it with a hair dryer first, and then let it sit for 1 day to try, if it doesn't work, you have to go outside to fix it.

Most people believe that we live our lives by choice. In fact, not all. Even if we are truly intelligent, some of the choices we make may reflect our perception of ourselves in the moment.

But by and large, we are all like robots, controlled by the conditions and habits of the past, operating automatically and mechanically. Therefore, we have to be self-conscious. To be self-conscious is to be able to think and act at all times, so that you can make the choices you really want, rather than being manipulated by past settings.

Being self-conscious allows us to live the way we are today, rather than living in the past, and allows us to stay on top of the situation and make full use of our knowledge and talents, rather than always being busy coping and always driven by fear and insecurity.

If you want to create wealth, trust that you are at the wheel of your own life, especially when it comes to money. This is very important. If you don't believe this, then you must have thought that you have little or no control over your life, and therefore little or no control over your financial success—this is not an attitude of wealth.

It means that the horn has burned out due to water ingress.

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

What should I do if there is no sound when the mobile phone enters the water? After the mobile phone is flooded, there are several treatment methods according to the water ingress:

The first type is a light splash: the water just splashes on the surface of the phone, which is relatively common. As long as it does not enter the earphone jack, charging port, earpiece, etc., you only need to dry it with a paper towel in time.

The second type of mild water ingress: the phone fell into the water, but the water was clean and the water was picked up in time. Then the correct thing to do is to put the water inlet facing down to prevent the water from flowing to the rest of the phone.

And turn off the phone in time, and wipe the water on the surface and hole of the phone with a paper towel and cotton swab. Finally, put the phone in the rice and wait for a few hours.

The third is heavy water ingress: it is recommended that you turn off your mobile phone and bring the relevant purchase voucher to the customer service center of the nearby mobile phone manufacturer for maintenance, if you continue to use it or repair it in an unofficial service store, it may further damage the internal components. You can check the address of the manufacturer's customer service center near you through the official website of the mobile phone.

The phone has been in the water for a long time, and the screen does not have any display. Then don't try more, wipe the water with paper and send it to the maintenance point for maintenance as soon as possible, don't try too much. I have personally experienced this, and the consequences are very serious.

What should I do if my phone is scratched?

Friends who have pasted tempered film, you don't have to worry about this, just change it. But for those who like the texture of the original screen and accidentally cause scratches, you need to take a look. In fact, the screen of the mobile phone is generally difficult to scratch, but once scratched, you can use white vinegar, toothpaste, etc. to wipe the screen, so that the scratches on the screen become shallow or even disappear.

But if this is the case as shown above, then it is better to find a professional person to solve it. What should I do if my phone has no signal? In addition, there is sometimes no signal on the mobile phone, so don't worry.

If the environment is really biased, it is normal. However, if the signal is normal, it is recommended to switch on and off the test. There are several reasons why the mobile phone has no signal, such as network failure, or damage to the transceiver component due to a fall.

Therefore, when there is no signal on the mobile phone, you can try to turn it on and off at the first time to see if it is restored. If there is no change in the switch on and off several times, then it is likely to be an internal problem and needs to be repaired after the sale.

1. It is recommended to turn off the power as soon as possible after the mobile phone drops water, and wait until the liquid inside the mobile phone is discharged and the inside and outside of the body are dry before trying to turn it on;

2. Try to place the mobile phone in a dry and ventilated place and use a paper towel to absorb the water stains on the surface of the mobile phone, and use cotton swabs, paper towels and other tools to absorb the water of the upper earpiece and the lower speaker of the mobile phone to ensure that the liquid is completely absorbed, and then confirm whether the mobile phone speaker can sound normally;

3. If the speaker can make sound but the earphones have no sound after inserting the earphones, it may be that the liquid in the earphone hole causes the jack metal paddle to be in poor contact, and the mobile phone will automatically enter the earphone mode without plugging in the earphones.

4. In making sure that there is no liquid at the speaker, the inside and outside of the mobile phone have been dry, there is still no sound after opening the mobile phone, rule out whether the volume is too low, after the above are ruled out, you can only replace the speaker of the mobile phone, it may be that the speaker can not make sound due to the failure of the speaker after water ingress, and you can only go to the mobile phone repair shop to replace the speaker.

After the mobile phone enters the water, there is no sound outside, it should be turned on before the water is cleaned, causing the speaker to burn out, in this case, it is best to go to the Huawei repair center to repair, this is the best solution.

If there is no sound after the mobile phone is flooded, it is recommended to deal with it according to the following methods: 1. Please try to place the mobile phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of the mobile phone.

If you are still within the warranty period, you can go to the official repair shop of the mobile phone to choose the repair, which can ensure the quality of the repair and save the cost. If the warranty period is over, then find a private mobile phone repair shop to repair it.

In this case, it is recommended that the landlord send the mobile phone to the after-sales service in time, disassemble the phone to check whether the hardware of the mobile phone has been damaged.

Take your phone to Huawei's customer service center for repair.

It is recommended to turn off the power as soon as the mobile phone falls into water. Try to place the phone in a dry and ventilated place and use a paper towel to absorb water stains on the surface of the phone, and use cotton swabs, paper towels and other tools to absorb the moisture from the upper earpiece and lower speaker of the phone. If there is no sound from the earphones, you can use a cotton swab or paper towel to clean up the water in the earphone hole.

Then rule out whether the volume is too low, and you may need to replace the speaker after all of the above are ruled out. Here's a closer look:

What should I do if my phone stops sound after falling into the water?

1. It is recommended to turn off the power as soon as possible after the mobile phone drops water, and wait until the liquid inside the mobile phone is discharged and the inside and outside of the body are dry before trying to turn it on;

2. Try to place the mobile phone in a dry and ventilated place and use a paper towel to absorb the water stains on the surface of the mobile phone, and use cotton swabs, paper towels and other tools to absorb the water of the upper earpiece and the lower speaker of the mobile phone to ensure that the liquid is completely absorbed, and then confirm whether the mobile phone speaker can sound normally;

3. If the speaker can make sound but the earphones have no sound after inserting the earphones, it may be that the liquid in the earphone hole causes the jack metal paddle to be in poor contact, and the mobile phone will automatically enter the earphone mode without plugging in the earphones.

4. In making sure that there is no liquid at the speaker, the inside and outside of the mobile phone have been dry, there is still no sound after opening the mobile phone, rule out whether the volume is too low, after the above are ruled out, you can only replace the speaker of the mobile phone, it may be that the speaker can not make sound due to the failure of the speaker after water ingress, and you can only go to the mobile phone repair shop to replace the speaker.

Hello! Remember the first time, don't force it on, otherwise it will be more serious damage to the phone because of water ingress, you should contact the after-sales service at the first time, and then let the after-sales deal with it, if it is inconvenient, you can also let the maintenance master of the repair shop help!

Insert a cotton swab into the phone hole and turn it to absorb the water.

Blow with a hair dryer, not too close, and the temperature should not be too high.

The speaker is damaged by blisters and goes to a professional repair service for repair.

Is the question there?