-
Click on "Control Panel".
Click on "Network & Internet", and then click on "Network & Sharing Center".
3Click on "Set up a new connection or network".
4Select "Manually connect to the wireless network" and click "Next".
5. Set the password, etc., and click "Next".
-
If you are using China Unicom Broadband and the broadband connection of the computer is unsuccessful, first check whether the broadband is down, if not, you can solve the problem by the following methods:
1. Restart the computer and modem.
2. If it still can't be solved, you need to check whether the indoor network connection is normal and whether the network card light is on.
-
You say your computer is connected to broadband and can't broadcast numbers?
If this happens, first check the prompt that appears on the computer after dialing the number after dialing the dial-up connection, call the customer service of your broadband operator by prompting, let him check the status of your broadband, if everything is normal, and then check your hardware, if you can connect to the router computer can access the Internet, then it is not a problem with the network card, if you connect to the router and cannot access the Internet, it may be that there is a problem with the network card, update the network card driver, in the test, if it still doesn't work, You just use a network cable to connect directly to the fiber modem, and then create a new dial-up connection on the computer, test it at this time, so that there should be no problem, you can test it first, if there is a problem, contact me!!
-
<> "Check the wiring, and settings, whether it is a wireless router or a direct light modem, the settings are different, query from the line, indicator light and settings together, check whether the mobile phone and other wifi are normal, etc.
-
1. It may be caused by the wrong installation of the dial-up software, right-click the network icon in the lower right corner of the desktop, and select "Open Network and Sharing Center";
2. Click "Change Adapter Settings" to delete "Broadband Connection";
3. Return to the "Network and Sharing Center" interface and click "Set up a new connection or network".
4. Select "Connect to the Internet" and click Next, click "Broadband (PPPoE)", enter "Username" and "Password", and click on the connection to create successfully.
-
Method 1: Check whether there is a problem with the network equipment, first of all, we have to see if there is a problem with the optical modem, if it is the case that everyone re-pays, you can restart our optical modem to reconnect to the network, if there is no problem with the optical modem, the network cable connection is stable, this is to eliminate the problem of the optical path, you can check whether the router is in poor contact, if the router connection is normal, you can check whether the router interface indicator will be on, if not, at this time, we have to call ** on the relevant network to seek their help. Method 2, search for connection problems through PC Manager, first find PC Manager on our computer desktop and open it, if we don't have this app on our computer desktop, we recommend you ** one. Through the above operations, we have successfully solved the problem that the computer cannot connect to the Internet.
-
Setting problems, one is the router setting, the other is the notebook setting, if the desktop computer is plugged in and cannot connect to the Internet, install the 360 network tester to check the port.
-
It may be due to broadband arrears, and at this time, you only need to pay the bill again.
It may be because the network cable is loose, so just unplug the network cable and plug it back in.
A virus in your computer may cause you to lose your broadband connection, so you only need to perform an antivirus scan on your computer.
It may be that there is a problem with the optical modem, in this case, you can contact the operator of the network cable and ask the staff to solve the problem of the broadband connection.
-
Computer connection broadband can not be connected, the reason is very many, first of all, if everything is used normally, it is a sudden broadband can not be connected, you can first try to use the mobile phone to access the network wireless, the network to see if it can be connected, if you can access the Internet, this can only be the network is good, and the problem is in your computer, and if the mobile phone can not access the Internet, it is recommended to restart the optical modem and router, if it still can't be solved, it is recommended to call ** to report for repair.
-
To check whether the network is running normally, we first check whether the network devices such as routers and cats are running normally, and whether the indicators are normal. If the network is normal, it is a problem with the computer; If the network is not normal, it may be a problem with the network line, contact your network operator to solve it.
-
If you are connected to the Internet, the premise is that the broadband operator is not in arrears and the external network input is normal. First of all, whether the network cable is stuck in place, whether there is bad contact, whether the network cable is damaged, and whether the connection line is wrong. Then the device, whether the equipment is faulty, whether there is a problem with the network card, whether there is a problem with the network card driver, after the above problems are eliminated, the answer will basically be found.
-
Possible reasons for this are:
1.The username or password entered into the computer is incorrect;
2.There is a problem with the network cable connection of the computer;
3.viruses in computers;
4.Problems with network settings.
Solution: Confirm that the network interface is connected normally, and then confirm the correct username and password, and perform a comprehensive antivirus on the computer. If you forget, you can consult your carrier. If you have a problem with the network settings, you are advised to consult with your carrier about the correct setup method.
-
1. Error**.
1.Click the Start menu, click the Help and Support command.
2. The system settings are incorrect.
1.In the lower-right corner of the taskbar, click the icon for the network connection, and then click Open Network and Sharing Center.
2.First, click "Troubleshoot" under the Change Network Settings bar, then click "Internet Connection" under the network bar, and then click "Next" to continue after entering the "Internet Connection" wizard.
3.Select Troubleshoot connecting to the Internet, and the system will detect the problem and try to fix it, and if it can't, the system will suggest a solution.
4.Click Network Adapters and click Next to diagnose problems in the network configuration.
-
The problem of broadband can not connect to the computer, involving many problems, such as whether the network is normal, whether the router is passed through the home, and whether it works normally, whether the original computer uses other fixed IP addresses, if so, it is changed to automatic capture mode, in short, the elimination method is excluded one by one.
-
If you are unable to connect to the broadband issue, you can do the following:
1. Perform stand-alone dial-up, if you use a router, please temporarily disconnect the router for testing;
2. Check whether the network cable or ** cable is loose;
3. Check whether the network equipment such as modem is overheated, and try again after restarting.
4. It is recommended that you perform a full virus scan on your computer.
-
If you can't connect to the Internet using China Unicom broadband, there may be the following reasons:1If the broadband is in arrears or expires, you need to pay or renew it in a timely manner. 2.If the network cable is loose, you need to plug in both ends of the network cable tightly.
-
The common reasons why the computer cannot be connected to broadband are: the network cable is disconnected due to loose network cable plugs and other reasons; The power supply of the optical modem or router is not properly plugged in; Bandwidth is shut down due to overdue payments.
-
1. Desktop-right-click [Network] or [Online Neighbor] - click [Properties].
2. Click [Change Adapter Settings] and a pop-up window will appear.
3. Delete the original [Broadband Connection] icon, click the back button, and click [Set New Connection or Network] in the window.
4. In the pop-up window, click Connect to the Internet, and click Next.
5. Click Broadband (PPPoE) (R).
6. Enter the username and password.
-
The computer can not connect to the broadband, the main reason is that the network card driver version in the computer is too low, resulting in the inability to configure the network, the solution is to install the driver wizard to update the driver.
-
If the computer is connected to the broadband, you need to know the connection form and then find the corresponding reason, if it is a wireless connection and the mobile phone is connected to the same router, wifi is no problem, then delete the saved connection in the computer and reconnect it.
-
If it is connected with a network cable, check whether the plug and socket are in good contact; If it's a wireless connection, check if there's a network signal; Check whether the modem or router is normal. FYI.
-
There are several reasons why you may not be able to connect to a broadband network. For example, poor network cable contact, incorrect configuration of network parameters, network card drivers are not installed correctly, etc. This one needs to be checked one by one.
-
Generally, the password is wrong, or if there is a router, the router is not set up, and the password needs to consult the operator, and the router can only be connected to the Internet normally after it is set.
-
The computer is connected to broadband, and it can't be connected, in this case, you can check whether the broadband connection line is normal, check the network card driver, these are no problems, then call the operator**warranty processing.
-
Re-enter the broadband and password, and then check that the network connection and each interface are plugged in correctly, or you can use the housekeeper to fix the network.
-
1. It is recommended to change to a place with fewer people, and the signal will be better;
2. It is recommended to turn on the airplane mode of the mobile phone and then turn it on again;
3. It may be that the location does not cover the 4G network, try it in another place;
4. It may be that the mobile phone traffic is running out, it is recommended to check the remaining traffic, if there is no purchase traffic** order.
-
There will be a prompt if you can't connect, just follow the prompt.
-
Click on the network icon at the bottom right of the computer, then find the name of your home network, enter the correct password, and you can connect.
-
It seems that if people don't go up, you can. Only then restart the router or go to the operator** and let him write it to you to check it.
-
Please consult your broadband carrier's customer service.
Hope it helps.
1. First open the start menu, open the control panel in the start menu, find the network and internet option in the control panel, and click this option to enter the network settings page. >>>More
Error **629This means that you have been disconnected from the other computer. Please double-click on this connection and try again. >>>More
Can't get on, the wifi is for the desktop computer or laptop that has been able to access the Internet, plug in the mini wifi virtual a wireless router out, let the mobile phone or ipad access the Internet through this wireless network, so if there is no laptop or desktop computer is not on. You need to buy a mini wifi that supports a 3G data card.
Error 629, disconnected from the other computer.
Please double-click on this connection and try again. >>>More
Hello, the router needs to be set up.