I would like to ask you how to drive the run in period of a new car well

Updated on Car 2024-08-07
3 answers
  1. Anonymous users2024-02-15

    Don't slam on the accelerator and brakes, and don't rpm higher than 2500. So generally to 2000 rpm you shift gears, the car to 2000 kilometers to change the oil, to 7500 kilometers again the first insurance (oil, transmission oil are changed) the car to 10000 kilometers to run high speed, that is, the speed is higher than 120, usually not higher than 80 yards.

  2. Anonymous users2024-02-14

    When starting or stopping, the brakes should be gentle and slow to make the brake pads run in better. Try to sit alone in the car, don't carry too many passengers, and drive lightly. 40km h, 60km h, 80km h run at a constant speed for 100 km, other speeds start at normal speed.

    Parking and driving on city roads (20-30km). When there are more than 1 passenger, the speed is under 60kmh. Parking and driving on city roads (20-30 km).

    When there is more than one person in the car, the speed should not exceed 60 km/h. 500-1000km: Again, the method above.

    Note that the maximum speed cannot exceed 90km, and the same as above, note that the maximum speed cannot exceed 110km and more than 110km: extremely high speeds can be pulled. 1.

    Use oil wisely: Try to add as much gasoline as possible. 2.

    Loading: During the break-in period, the unloading load cannot exceed 75% of the additional load. When loading a new car, it should be shorter than the specified load weight and should not be overloaded.

    Overloading will reduce backloading, severe wear and tear, and damage to vehicle failures such as receivers, transmissions, drivetrains, and suspension systems. 3.In addition to driving and using the car correctly during the run-in period, the owner should also strengthen the maintenance during the run-in period, such as maintaining the car paint and cleaning the car correctly.

    4.Choose high-quality lubricating oil: Choosing a low-viscosity, high-quality lubricating oil can make the friction surface lose good lubrication and slow down the wear of parts.

    5.The driving speed should not be too high. Due to the running-in period between parts, excessive load and high speed will add to the impact of the mold on the parts.

    Stepping on the accelerator to accelerate too fast can easily cause damage to parts. 6.Purchase car insurance in a timely manner to ensure safety.

    Novices are not very skilled in driving on the road, the car is in the run-in period, and improper driving is prone to accidents. Therefore, car owners should buy car insurance and transfer the risk to the insurance company, so that they and their cars are protected.

  3. Anonymous users2024-02-13

    How to drive a good car during the run-in? For example, what do I need to pay attention to when driving during the run-in period? Also, how to drive during the run-in period can save fuel for future cars and so on.

    It is also important to use the new car correctly during the run-in period, for example, improper use of the new car during the run-in period will cause damage to the engine and fuel consumption. Therefore, new car owners should pay attention to the following issues when using their cars.

    1.Do not let the engine speed too high when using. In general, the rotational speed should not exceed 3000 rpm, and if it is automatic, it should not exceed 3500 rpm.

    2.Do not hold gear or drive at low speeds for long periods of time. When all cars are driving at low speed, the actual load is greater than that of medium speed, so it is not advisable to drive below 60 km h for a long time during the run-in period.

    We had to gradually increase the speed per hour. At the same time, if you run at a speed of 80 km h and then suddenly speed up, the new car will not adapt. Therefore, you should gradually increase the maximum speed during the run-in phase.

    Automatic transmission cars, because the manual shift cannot be used to determine the run-in specified gear, so it can only be achieved by driving speed. In short, the run-in should be driven at a constant speed, and the run-in of 30km h, 60km h, 80km h, and 100km h must be stable.

    3.The body cannot be driven under too heavy loads. The lighter the body, the better, because too heavy a load can damage the car.

    4.Avoid driving for too long. Many car owners can't put it down after buying a new car. They always leave it on all day. In fact, doing so will accelerate the aging of parts, which is very harmful to new cars.

    Millions of car purchase subsidies.

Related questions
10 answers2024-08-07

New cars, like other new tools, have to have a certain process of mutual adaptation with the owner. My colleague had just bought a new car, and she had never dared to drive it, so she used the family's old car as a practice vehicle, and as a result, the old car was driven into a ditch, so her father no longer allowed her to touch the family's old car. >>>More

12 answers2024-08-07

Not all functions have a return value.

When no value is returned. >>>More

7 answers2024-08-07

In fact, I also had such confusion, I liked it for 3 years, and I haven't seen it for 3 years, and I played ** once in the last 3 years, and I talked for a long, long time, and then I dreamed of him, I always felt that I still couldn't let go of him, until I met my current boyfriend, I didn't know that I had actually let go of it a long time ago, just in fear of losing that feeling, I would struggle in my heart, my mind had been put down, but my heart was unwilling, so there would be such a situation, and now I finally found the original feeling in reality, to truly understand your heart.

9 answers2024-08-07

You with a round face - straight short hair and shoulder-length front ears. >>>More

18 answers2024-08-07

A responsible planner will have a good sense of service and professional quality. The communication between the newcomer and the planner must be smooth, that is to say, the first thing a good planner should do is to fully understand the couple, including their love experience, personal hobbies, romantic stories, living habits, growth experience, etc. The normal wedding planning process is that the planner gets some unique information about the couple through communication with them, and then draws up a wedding process plan based on this information. >>>More