Volkswagen Tiguan turn signals don t go off

If the Volkswagen Tiguan turn signal does not sound. It should be a broken bulb, or a faulty wiring. It is recommended that you go to a local professional repair shop or Volkswagen 4S shop to check carefully.

If you seem to be in this situation, if the turn signal can be lit normally, but there is no sound prompt, it is generally a problem with the buzzer, and you can go to the repair shop to check whether the buzzer is broken.

If the turn signal of the Volkswagen Tiguan does not sound, it is likely that the relay is a problem and the buzzer may be faulty.

Hello, your reason may be that there is a problem with the turn signal sound relay, it is best to go to the store to check and make sure!

You first have to check to see if the bulb is broken, and then check for faulty wiring.

I'll give you a final answer. Volkswagen Tiguan steering has no Didi Da Da prompt sound, some cars are also accompanied by a seat belt prompt sound, the double flash prompt sound disappears at the same time, the dashboard shows the turn, and the light seat belt prompt signal works normally. This fault happened in my car (2015 Tiguan high-end, not much driving, less than 50,000 driving, maybe the turn signal didn't take long, can turn a few corners).

Due to the absence of prompt sound, whether the turn signal is working, the key is whether the turn signal is automatically turned off after the steering wheel returns to the right, can not be known in time, to see the instrument, very unaccustomed, there are also potential safety hazards. To the 4S shop, private repair shops have checked, ** different statements. I have also repeatedly searched the Internet for relevant information, text, **, repair, dismantling knowledge, and even professional articles, but there is no credible answer.

But this buzzer is a bit complicated. It has nothing to do with steering to "flash relays". Some cars have a "buzzer" and a total of instrument components, which are installed separately in a certain position of the car (the devil knows where, the location is different for different models), and the replacement is simple and cheap.

But be sure to remember that it's not a Volkswagen. Unfortunately, my high-end car "Shanghai Volkswagen Tiguan" is integrated with the instrument assembly, to change the instrument, accessories ** 4162 yuan, working hours 1200 yuan. It's really unlucky to buy this car, and there are many small problems.

This Chinese-German mixed-race child not only did not get better, but gave birth to many genetic diseases. If you want to repair it, it costs money, and there is no other way.

Let's take action to complain to the "China Automobile Quality Network" to see if it is a system defect and whether it can be recalled.

Hello, this situation of yours should be yours, the car has broken down. Then you go to the repair shop or 4S shop and use the computer to check it.

Generally speaking, there will be, this function of jumping flash, there should be a sound, you can be advised to go to the 4S store to test it.

The reasons why a car makes a noise when turning are as follows:

1. Friction between plastic parts, because the steering wheel is usually composed of plastic parts, if the temperature becomes cold, the plastic will become hard, and there may be friction sound;

2. If the abnormal sound comes from the steering wheel, then the problem is likely to be caused by the airbag hairspring in the steering wheel.

3. If it still rings, replace the airbag hairspring, because the airbag hairspring is damaged. Be careful to remove the steering wheel gently, or unplug the airbag fuse to avoid the airbag from deploying.

The abnormal sound made by the balance bar, if it is not the sound of the shock absorber, then it is necessary to check whether the balance bar rubber is loose or damaged, the balance bar rubber is loose and damaged, and the balance bar rubber is loose and damaged not only when playing in the direction, but also makes a noise when crossing uneven roads, and the loosening of the balance bar rubber can be solved by adding a gasket, and if it is damaged, it can only be replaced.

My car is four-wheel drive and has similar problems as yours, that is, in the morning, when the cold car starts to turn, it will rattle, the hot car should be better, the check has eliminated a lot of suspicions, and finally - coupler oil failure I hope my answer will be helpful to you.

Hello! In your case, you first need to check the upper seat and pressure bearings of the shock absorber, which may be caused by bearing damage.

The second is the suspension of the automobile chassis, like the lower limb arm, and the stabilizer bar will make a sound when the stabilizer bar is loose and interferes.

Finally, there is the abnormal sound of the steering machine, which is generally more obvious under the steering wheel.

It is recommended that you go to the repair shop to listen to the specific abnormal noise, and the following can be repaired. [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello! In this case, it is recommended to listen carefully to the sound for that side, and after confirmation, it is recommended that you check whether the half-shaft cage on that side is damaged, and wish you a happy car [Car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

The coupler problem, mine is the same, the 4S store said that the whole batch is like this, and the solution of Volkswagen has not come out yet.

[Power steering fault lamp function].

When the vehicle is driving, the power steering system fault light is on, indicating that the power steering system is faulty, at this time the steering power may be weakened or completely invalid, the resistance to turn the steering wheel will be several times greater than usual, and this fault can not be checked or repaired by itself, so the best way is to drive to the nearest service station for repair.

Precautions] Because the steering wheel that loses power assist when this system fails has a large steering resistance, the vehicle is very inflexible, so you should be extra careful when driving, slow down and slow down.

There are many reasons for the power steering warning light to light up, and it will also be accompanied by the following symptoms: heavy steering, abnormal steering noise, steering wheel shaking, poor steering wheel return ability, etc., let's take a look at how to solve the power steering failure:

1. The power steering system contains a large amount of air, which causes the car to steer abnormally;

2. There are foreign objects in the steering hydraulic pipeline causing the flow control valve of the steering pump to be stuck;

3. The connection part of the steering power system is loose, resulting in the leakage of steering fluid;

4. The piston cylinder of the steering gear is worn too much, the oil seal is poorly sealed, and the control valve is bonded or damaged.

Solution: 1. Check the steering gear, steering pump control valve, oil cup filter, steering oil, and clean the entire power steering system;

2. Check the tire pressure. If there is a lack of gas, it should be replenished in time;

3. Check the connecting parts of the tubing and tighten the connecting bolts;

4. Replace the oil pipe, power steering pump or power steering gear.

The reason why the steering system warning light is on is because of the power steering system fault light, which indicates that the power steering system is malfunctioning. When the yellow light is on, it means that the steering system is partially out of order and more force is needed to turn the steering wheel. When the red light is on, the steering system is completely faulty and the power supply system does not provide any assistance.

The fault may cause: large steering force, abnormal steering noise, steering wheel shaking, poor steering wheel tilt ability and other phenomena.

Whether the fuse is burned out: When the live wire of the dimming switch is lapped with the far-beam and low-beam binding posts respectively with a screw, the following situations are divided: 1. The lights are on, indicating that the dimming switch has fallen for a reason.

2. If the high beam is bright and the low beam is not bright when lapping - connecting, the fault is between the dimmer switch and the headlight or between the low beam. 3. If the high beam of the headlight is not on, you should check whether the high beam indicator is on, if it is on, it means that the fault is between the wiring board and the headlight, if it is not on, it means that there is a fault between the wiring board and the dimmer switch. 4. If only one headlight is on and the other is not, it may be that the filament is burned or the wiring is broken, or the iron is poor (the brightness of the headlight is weak).

Summary. 5 Replacement of the front turn signal, first open the engine compartment cover, find a total of three soft covers behind the headlight assembly; 6 The left and right are low beams and high beams, and there is a cover underneath, remove the cover and put it in place so as not to fall into the engine compartment; 7. There is a turn signal lamp holder with a handle, unscrew it and pull it out, and rotate the bulb to disassemble and replace it. <>

The Tiguan L horn and turn signals do not work.

Hello, Tuzhen is rising, the horn and turn signal are not working, and it can be considered that the circuit fuse of this part of the Yu Lao is burned, and the new replacement of the fuse can solve the problem.

1. Inspection and analysis: After the maintenance personnel pick up the car, confirm the fault, and the user reflects the same Neiyan town, the sound horn of the other doors and the lighting of the rolling car door are normal. Connected to the diagnostic instrument detection, the fault code "B106113 - left front tweeter, open circuit, active static" was read in the information electrical coarse old coarse sub-equipment.

2 After communicating with Yu Souxu, it was learned that the faulty vehicle had just been equipped with mobile phone interconnection, so the maintenance personnel suspected that the installation caused the failure. The additional wiring harness under the driver's seat was removed, and the diagnostic instrument test showed that the vertical combustion barrier was still missing. Considering that these two faults occur at the same time, it is important to find the connection between these two electrical appliances.

It was finally confirmed that the two consumers shared a wiring harness. Dismantling the driver's side door trim panel, it was found that the wiring harness connector of the speaker was not supposed to be caused by the installation of mobile phone interconnection.

3 Troubleshooting: Install the wiring harness connector back, the electrical appliances on the 2 doors are restored to normal, and the fault disappears.

4 The reason why the Tiguan turn signal does not sound is that the steering relay is not sounding due to the failure of the steering relay. The turn signal relay is behind the double flash switch. The turn signal relay is a controller that controls the frequency of the turn signal flashing, and the damage of the relay can cause the turn signal to turn on when it is always on; A faulty relay can cause the turn signal to flash too fast or too slowly.

The steps for disassembling and replacing the lamp are as follows.

5 front turn signal replacement, first open the engine compartment cover, find the headlight noisy bucket assembly behind a total of three soft covers; 6 The left and right are low beam lifting and high beam, and there is a cover underneath, remove the cover and put it in the appropriate position, do not fall into the engine compartment; 7. There is a turn signal lamp holder with a handle, unscrew it and pull it out, and rotate the bulb to disassemble and replace it. <>

Why is the Volkswagen Tiguan turn signal not lit? Volkswagen Tiguan ( Price |Detailed explanation of the model ) Why is the turn signal not lit? The reasons why the Volkswagen Tiguan turn signal does not light up are as follows:

1. The flash relay live wire head is out of power. If there is no electricity, check whether there is a disconnection between the line and the power supply. If there is electricity, use a screwdriver to connect the two binding posts of the flash relay car, and then the turn signal is on, indicating that the flash relay is faulty and should be replaced in time; 2. Flash relay failure.

Open the flash relay cover and check whether the coil and resistor are in good condition. If the resistor is hot and the contact cannot be closed, the movable contact can be pressed; At this time, if the turn signal is on, it means that the relay is faulty; 3. If the turn signal is not lit, it may be that the steering switch is faulty, and you can use a screwdriver to connect the loose line of the steering switch Huoye Fan and the binding post of the left and right light lines respectively. If the light is on, it means that the steering switch is faulty and should be removed for maintenance or replacement.

Regarding the landlord's concern about "why is the Volkswagen Tiguan turn signal not lit?" "Here's my personal opinion:

The reasons why the Volkswagen Tiguan turn signal can't be guessed are as follows:

1. The flash relay live wire head is out of power. If there is no electricity, check whether there is a disconnection between the line and the power supply. If there is electricity, use a screwdriver to connect the two binding posts of the flash relay, and then the turn signal is on, indicating that the flash relay is faulty and should be replaced in time;

2. Flash relay failure. Open the flash relay cover and check whether the coil touching type and resistance are intact. If the resistor is hot and the contact cannot be closed, the movable contact can be pressed; At this time, if the turn signal is on, it means that the relay is faulty;

3. If the turn signal is not lit, it may be that the turn switch is faulty, and you can use a screwdriver to connect the live wire of the turn switch and the binding post of the left and right light wires respectively. If the light is on, it means that the steering switch has a fault and should be removed for maintenance or replacement.

The reason why the Tiguan turn signal is on is that the steering lever is faulty or there is a short circuit in the line. The turn signal switch is on the light fork on the left side of the steering wheel, and the up and down toggle is to control the left and right of the turn signal, and the turn signal is turned off when it is dialed to the middle, and the right steering is up, and the left steering is down. The blinking frequency of the turn signal is controlled by a relay.

The steps to remove and replace the turn signal are as follows:

1. For the replacement of the front turn signal, first open the engine compartment cover, and find that there are a total of three cover sun soft covers behind the headlight assembly;

2. The left and right are low beam and high beam, and there is a cover below, remove the cover, put it in the appropriate position, and do not fall into the engine compartment;

3. There is a turn signal lamp holder with a handle, unscrew and pull it out, and rotate the bulb to disassemble and replace.