Can the gas of a motorcycle blow the air horn? 40

The purpose of installing a gas storage tank to store pressure and deflation with a solenoid valve can be achieved, in fact, the purpose has already been achieved, because the "exhaust gas horn" you said was patented in 1996, but it was not implemented. This is not implemented because God cannot let it be implemented, and God cannot let it be implemented because it is a security risk! The air horn drives the standard pressure of the air pressure, which is 3bar, and the motorcycle due to the installation restrictions, it is impossible to have a perfect pressure control switch and safety valve like the air compressor, not to mention the cold and snowy winter wax moon, even if there is a safety valve outdoors, it will not be able to play a normal role because of freezing, this goods will become a "scumbag"!

There is also no pressure in the exhaust of the motorcycle itself, and to compress the gas into the gas tank, it is necessary to do work on the gas, where does the energy conversion of mechanical energy come from? Then you can only count on the engine, not to burn gasoline, not to mention LPG, to install a high-power diesel generator, isn't this a burden for motorcycles? This doesn't work, that doesn't work, it's restricted everywhere, why change it to an air horn?

So this thing is still on paper, and no one does it, not because it can't be done, but because it's not worth doing!

The air of the motorcycle can blow the air horn, but it needs to be set and adjusted.

Summary. A motorcycle air horn is a sound device used on motorcycles that can be used to emit sound to alert other road users.

A motorcycle air horn is a sound device used on motorcycles that can be used to emit sound to alert other road users.

I'm sorry I don't understand, but can you elaborate on that?

Air horn is a type of car horn, which is divided into electric air horn, mechanical air horn, etc. The air horn uses the air of compressed air to roll and resist the hunger flow to vibrate the metal diaphragm, and the shape is mostly long horn-shaped (cylindrical large return), which has the characteristics of large sound and far away from the dismantling pin.

Dear landlord:

Working principle: press the horn solenoid valve to work, the positive electrode is energized and the pump is working to produce gas The gas blows the reed through the horn and produces vibration After the horn amplification, it sounds.

Motorcycle horns are the same as car horns! It's not a moving coil permanent magnet type like an ordinary speaker! It is driven by the oscillation of the electromagnet to drive the metal vibrating membrane to make sound!

Its vibrating part consists of an electromagnet and a pair of normally closed platinum contacts! The electromagnet is energized and pulls the platinum away and cuts off the power! After power failure and magnetism, reset and then get electric engagement!

This reciprocation forms a mechanical oscillation! This oscillation makes the vibratory mill sound!

The oscillation frequency of platinum is adjustable! That is, the tone of the horn is adjustable! The tuning platinum of the car horn is absolutely technical work!

Good luck with your progress.

Looking forward to your adoption, thank you.

An air horn cannot be installed on a motorcycle. Because there is no air pump on the motorcycle. Besides, it is impossible to install an air pump

Working principle: press the horn solenoid valve to work, the positive electrode is energized and the pump is working to produce gas The gas blows the reed through the horn and produces vibration After the horn amplification, it sounds.

Motorcycle horns are the same as car horns! It's not a moving coil permanent magnet type like an ordinary speaker! It is driven by the oscillation of the electromagnet to drive the metal vibrating membrane to make sound!

Its vibrating part consists of an electromagnet and a pair of normally closed platinum contacts! The electromagnet is energized and pulls the platinum away and cuts off the power! After power failure and magnetism, reset and then get electric engagement!

This reciprocation forms a mechanical oscillation! This oscillation makes the vibratory mill sound!