How to adjust the drift of floating fish? How do you adjust the float for fishing?

Float fishing (semi-water) drifting depends on the size and thickness of the line group (the size of the hook, the thickness of the line), the size and proportion of the bait, and the size of the target fish. If the target fish is small, the small hook is fine, pulling, rubbing, hanging small bait, and the hook is relatively large if the target fish is large, and the line should be larger, and what bait and bait size are determined: the bait is light to lower the mesh and fish the low mesh, such as grass bait fishing grass carp.

Pulling, rubbing, hanging bait is slightly larger, it is necessary to raise the eye to fish low, such as six to ten mesh, fishing three or four mesh, the main object fish such as grass carp, silver carp, perch and other big fish.

Float fishing for big fish should be floated with a short tail and long legs, which is specially used to catch the mouth.

Float fishing with bait should be flexible, generally adjust 4 fishing 2. It mainly depends on what kind of fish you catch and how well you catch float fishing.

If you are fishing for crucian carp and carp from the bottom, you still choose to be slightly more smart and long-tailed, and eat lead and drift. If you want to fish for grass carp, choose to eat about lead, float fishing pelagic fish, silver carp should eat about lead short-tail drifting, upturned beak, red tail to eat lead light, get up fast drift.

Some people say that the silver carp bite hook is calm and powerful, in fact, the crucian carp you put the drift spirit to present the drift phase is also like that, the drift adjustment spirit shield mainly depends on whether you want to filter the messy signal, as far as I said that the fishing silver carp with the lead drift he is conducive to filtering the small trash fish bite hook and hit the line of the chaotic signal, at least it will not be easy to pull the black ticket, with the short tail is convenient to see the mouth, many times it is difficult to identify the mouth, not that some people do not know, it is not good to identify, the short tail drift to see the tip of the drift down, can be recognized.

Floating fishing standard, first of all, we must change the inherent concept of bottom fishing standard. The purpose of adjusting the standard is to make the line and hook bait in the underwater state suitable for different fish conditions, so that the signal reflected by the buoy is clear, and at the same time can correctly reflect the signal of the fish swallowing the bait. Fish mainly eat bait in the process of falling bait, eat dynamic bait, the double bait of the fishing group does not fall to the bottom, the fishing group has no force on the bottom, we only need to consider whether the buoy can reflect the fish news as soon as possible and whether the sinking speed of the bait can cater to the speed of the fish eating bait as the main factor, so the floating fishing adjustment is completely different from the bottom fishing adjustment standard.

Yes, straight or to the end.

Also, half of the floating fishing is mainly about catching pelagic fish, so what you said about how far away you are is a bit incorrect. Sometimes the weather is good, there are many small fish, and there are still n more fish caught with water skin drifting.

Check it out. When asking a question, it's a good idea to explain the fish you want to catch: handshake

Fishing skills, how to adjust the float of fishing?

There are two ways to adjust the float for fishing, one is to adjust the distance between the float and the hook; The second is to adjust it at any time when fishing;

The first is to determine the depth of the bait by looking at what kind of fish to catch, and secondly, if the float is upside down on the surface of the river, then the bait must sink to the bottom, so the distance must be reduced.

Adjusting the float is to adjust the float to the appropriate position, so that the position of the underwater hook can also be determined, which should be determined according to the time and place, in fact, it is necessary to manually adjust the position of the float, and also to ensure that the float position is fixed.

First of all, you need to know the depth of the water at the fishing spot and adjust the float according to the depth of the water, which is good for fishing.

How to adjust the float for fishing is as follows:1. Find the bottom and position the drift.

Before fishing, first carry out a rough bottom-finding, the fishing rod is thrown directly into the water without hanging bait, and the lead seat is hung with some more heavy lead, which mainly plays the role of letting the float sink to the bottom, and then observe the float of the fishing line.

2. Adjust the fishing mesh to adjust the drift.

After roughly finding the bottom, hang the strand first, pull the drift down to about 25 cm in the empty hook state, and adjust the float, the distance of the float down is about ten cm greater than the length of the long strand. Then move the float and observe that the float is above the water. Continue to pull upwards, and if you see a scattered, it means that you have found the bottom accurately.

Finally, find the bottom in reverse. <>

3. Adjust the float when trying fishing.

Once you've adjusted it, you can try fishing. If the position of the line changes during the fishing process, and there is no fish bite for half an hour to an hour, don't wait any longer, immediately pull the float up to make the hook change to a different water layer. Sometimes, the water layer where the fish gather may change, so it is necessary to adjust the position in time according to the actual situation so that the fish can be caught.

Fishing skills, how to adjust the float of fishing?

Since the fishing float catches the signal during the movement of the float, it is not possible to set the fishing target. For example, if the surface of the water is exposed to 8 eyes after a pause of 3 seconds, and it begins to sink normally after a pause of 3 seconds, then there will be fish signals at any time during the sinking process. Fish news may occur when the float drops to 7 mesh, or it can appear in any number of meshes, such as 6 mesh, 5 mesh, 3 mesh, etc., so the angler does not have to think about the fish mesh at all.

So the question is, how should the adjustment be set? It depends on the specific water conditions and fish conditions. Under normal circumstances, if the fishing is shallow, it can be appropriately adjusted to about 8 meshes, with the increase of water depth, the number of mesh should be reduced, and the depth of fishing is below half water, it can be adjusted to flat water or even underwater.

If the following situations occur when fishing, the sinker should be adjusted: 1There was no fish signal during the whole descent.

This is because the lead sinker is too heavy to sink too fast, and the crucian carp cannot catch up with the bait, so the lead skin should be cut little by little until there is a fish signal. 2.The float is supported when it turns over, so that it cannot sink.

This is because the sinker is too light to sink slowly, and the hook bait is caught by small trash fish, so the lead skin should be added little by little until the float can sink smoothly and there is a fish signal. If you have any questions, you can go to Smart Sports to take a look.

There is a method of fishing float drifting. Adjust the depth of the float, adjust the weight of the primer of the float, adjust the length of the float, adjust the color and shape of the float.

1. Adjust the depth of the float: Adjust the depth of the float by changing the position of the fishing float. Move the float up or down so that the part where it floats is in the desired water layer. If you notice a fish moving on the bottom of the water, float closer to the hook and lower the float position.

2. Adjust the weight of the float: control the sinking speed and stability of the float by replacing or adjusting the weight of the float under the float. Increasing the weight of the lead makes the float more stable and makes it easier to sink into the water, and decreasing the weight of the lead makes it easier to float up and keep the bait suspended in the water.

3. Adjust the length of the floating body: The length of the floating body refers to the length of the floating body, that is, the part of the floating hanging fishing line. By adjusting the length of the float, the sensitivity and reaction speed of the float as it floats up or down can be changed.

The longer float length makes the float more sensitive and suitable for more active fish when fishing, while the shorter float length is suitable for quiet or inactive fish.

4. Adjust the color and shape of the float: Some fish are more sensitive to the color and shape of the float. Choose a float of the right color and shape according to the actual situation to improve the effect of fishing.

Bright colors (e.g., red, yellow) are more noticeable in sunlight, while dark colors (e.g., black, green) are more visible on cloudy days or in deep water.

Fishing float explained

Float fishing is a fishing technique that controls the position and depth of the tackle by using a float. A float is a buoyancy device, usually consisting of a buoyant body and a floating body. The angler fixes the mountain and land lead float to the fishing line, and adjusts the position and depth of the float according to the demand.

The purpose of the float is to suspend the bait in the ideal water layer, making it easier for the fish to spot and bite the hook. By observing the dynamics of the float, the angler can get information about the movement of the fish and the bite signal.

Adjusting the position and depth of the float is the key to fishing floating. Fun anglers can change the float state by moving the position of the float or adjusting the weight of the float's primers.

Floating up means that the bait is suspended in the water, and floating sinking means that the bait is sinking to the bottom. Different fishing environments and fish species may require different fishing techniques and adjustments.

Bottom positioning: first install the fishing rigs together, then throw them into the water, float in the water will float to about 1 mesh to observe the water depth, and at the same time put the top space bean and the second one close together to complete the positioning process. Drop-down float:

Move the float downwards at a distance of 25 cm from the left to the right until you see a discrete eye. Adjust appropriately according to the situation: After that, start the test fishing, and further adjust the drift according to the effect of the test fishing until the mouth of the fish becomes better.

Fishing is a recreational activity that people often do, and if you do it the right way, it will be easier to succeed. Fishing can take many ways, and there are different ways from different standards. For example, if you look at the depth of the fishing, sometimes you will use the float fishing method, and sometimes you will use the bottom fishing method.

For the former, the frequency of use is relatively high. In terms of the fish species fished, the fish that live in the middle and upper layers are often caught when using the float fishing method.

Since they are often found in the upper part of the water, it is easier to attract them when fishing. In addition, fishing floats can sometimes also fish for fish that live in the deep or bottom of the fish, because these fish species that live on the bottom sometimes float up, and in the process of their floating, it is relatively appropriate to take the fishing float. Specifically, it can be decided according to the fishing situation at the time.

As mentioned above, fishing can take the form of float fishing, but when it comes to implementing the process of float fishing, you need to take the right approach. Among them, bleaching is an important step:

1. Bottom positioning: When adjusting the drift, one of the important steps is to find the bottom, that is, to have a general understanding of the waters. Attach the rigs together and throw them into the water.

Float up in the water, and when you float up to about 1 mesh, observe the depth of the water. At the same time, the top space bean needs to be next to the second one, which means that the positioning is successful.

2. Pull down the float: Then, you need to pull down the float, and the distance is about 25 cm. When you see Sanmu, you know it's OK.

3. Appropriate adjustment according to the situation: after adjusting the drift, it does not mean that it is completely possible, nor does it mean that it cannot be adjusted later. Further adjustments are needed to suit the results of the trial fishing and the surrounding environment.

The correct way to fish for float drifting is as follows:

1. Heavy lead to find the bottom and find the water depth:

If we are determined to fish float in the wild fishing environment, then our first step is to find the bottom and find the water depth with heavy lead, because we never know how deep the water is in the unfamiliar waters in the wild fishing environment, so it is essential to find the bottom and find the water depth with heavy lead. And to clarify the depth of the water, it is also to let yourself know how deep you should fish floating, whether it is half a meter or a meter or how much!

2. Float down to half of the water depth.

After finding the bottom of the heavy lead and determining the depth of the water, then we can directly pull down and float to half of the water depth, as for why we should pull it to half the water depth, you will know later!

3. Trim the lead skin:

After the float is pulled down to half the depth, we can trim the lead skin, because we are fishing the float, so we can adjust the mesh number higher beforehand. We can adjust 6 10 mesh, after adjusting the drift, the double hook is in the half-water position, we pull the bait, the specific gravity of the bait is often lighter.

Normally, you may not press all the mesh into the water, there will be a surplus, at this time, it doesn't matter if there is one or two or three eyes left, as long as there is a number of meshes left, then you can do fishing normally.

If the bait weight is enough to fully press the float into the water, then you trim the lead skin again until the bait float is exposed!

Precautions and details

It is best to choose a float with a hollow tail and a larger lead for fishing. You can choose long legs, long body and long tail floating, this kind of float has excellent stability, after all, floating still needs better stability. Moreover, the hollow tail has its own buoyancy, and the bait weight is not easy to press too many meshes, although the transmission signal is blunt, but it can just filter out a lot of cluttered signals.

After all, fishing float double hook off the bottom, this is the most sensitive state, novice is difficult to grasp, blunt point of the float is much better than the sensitive float.