-
If the wooden floor is waterlogged, the floor installer should be notified as soon as possible, and it should not be removed by yourself.
Here are some ways to reduce losses:
1. Regardless of the size of the soaked area, it is not recommended to pry it up to dry, so that the floor will not be able to be used again. The correct way to do this is to quickly drain the surface water of the floor, remove the baseboard, expose the expansion joints, and rely on the expansion joints to dissipate the moisture.
2. If the solid wood floor enters the water in a small area, the water vapor can be sucked out with a high-power vacuum cleaner, but the floor needs to be pried up and dried in the shade for a large area of water.
3. After the soaking floor is pried up, the surface water of the floor should be wiped dry, and the reverse side should be placed upwards according to the "well" shape to prevent the surface from drying out and cracking due to rapid drying.
-
After the floor is soaked in water, dry it in the shade while trying to keep the floor from deforming. After the surface water of the floor is dried, it is placed in a "well" shape, and the weight generated by its stacking is used to prevent the occurrence of deformation, and the reverse side of the floor should be paid attention to when placing it to prevent the surface from drying out due to rapid drying, and at the same time pay attention to not being exposed to the sun, it should be placed in a ventilated place to dry, and under normal circumstances, it can be used again for solid wood and multi-layer solid wood with good quality. After quickly draining the surface water of the floor, the baseboard of the floor can be removed to expose the expansion joint, and the water vapor will be dissipated by the expansion joint, but according to the size of the water intake, it usually takes about 7 to 15 days to dry, and the product with good quality or not soaked in water for a long time can be recovered by itself.
So if the teak in your home is *** brand flooring, there should be no problem according to this method. In addition, if the loss is large, you can go to the relevant person in charge to obtain compensation.
-
If the floor is soaked in water in a large area due to some reason, and the amount of water is large, the floor manufacturer or its customer service should be consulted in time while cleaning the site, because the treatment methods of different floors are not the same. In short.
Try to completely remove the floor within the time, because in addition to the bathroom, the kitchen, living room, and bedroom are generally not waterproof, so the water on the ground needs to be cleaned as soon as possible to avoid leakage downstairs and cause greater losses.
-
When a wood floor gets water, it's important to take action as soon as possible to take appropriate measures to minimize the damage before it worsens. Here are some proven solutions:
1.Rapid cleaning: When water enters the wooden floor, try to remove the residual moisture as soon as possible. Use an absorbent cloth or a dry towel to dry the moisture on the surface of the floor.
2.Ventilation and drying: Open windows or increase ventilation by other means to speed up the drying of wooden floors. Additionally, using a fan or air dryer can also help wick moisture off the floor.
3.Use a steam iron: Bring the steam iron to medium heat, move it to the damaged area constantly, let it dry completely, and clean it with a dry towel.
4.Use wood scrubs: Wood scrubs are chemicals that are used to clean wood and restore its shine. If the area is larger, it is recommended to use a wood scrub to better remove the stain.
5.Sandpaper: If the damaged area of the wooden floor is relatively small, sandpaper can be used. After it dries dry, the surface is sanded with sandpaper, and the thickness of the sandpaper needs to be selected to the appropriate type.
6.Prevention: Regularly protect your wood floors and use professional floor care to enhance their water resistance. In addition, the use of non-slip carpets also plays a role in high-water sections.
In short, when the wooden floor gets water, we need to try our best to remove the moisture first, and then strengthen ventilation and drying. If the damage is more serious, professional maintenance measures can be used, and it should be noted that for the floor of the painted car layer, professional equipment and tools should be used for maintenance and repair to avoid damage to the floor.
1. On-site inspection.
Sports wood floor maintenance staff, or stadium staff, when they find that the sports wood floor is soaked in water after work, don't panic first, be calm. Inspect the soaking site at the first time to eliminate potential safety hazards, such as whether there are wires, electrical appliances, flammable and explosive materials on the soaking floor, etc. >>>More
1. It may be caused by the leakage of the water pipe, pry the floor open, find the leaking part, replace the water pipe in time, and then install the floor. >>>More
This problem is usually caused by soaking in water, and it is often better after drying, but the mark can still be seen. In order to completely solve the problem, the only way to do this is to grind off the paint layer on the surface and repaint it. (But this problem still needs to be solved by a professional painter), if you want to cover it up, it is to ventilate the floor to dry thoroughly, use liquid floor wax to evenly coat, and dry cloth to shine.
1. Because of its material and other reasons, family wood flooring may attract small insects, cause damage to the floor, and also bring trouble to family life. >>>More
Remove the baseboard to expose the expansion joints laminate flooring is not as delicate as solid wood flooring, if it is partially soaked in water, the surface water on the floor should be sucked up in the shortest possible time, if it is a small area of soaking water, it is recommended not to pry up the laminate floor to dry, which is easy to cause hard damage to the laminate floor, and is likely to cause serious consequences that cannot be restored. It is best to quickly remove the baseboard of the floor, expose the expansion joint, and rely on the expansion joint to dissipate the water vapor, depending on the amount of seepage water, it usually takes about 3 to 10 days to dry. At the same time, you can also use a vacuum cleaner to absorb water vapor in the splicing gap of the soaked floor, or use a hair dryer to dry it with cold air, but do not use hot air to prevent the surface from drying and cracking due to heat and drying. >>>More