What to do if the wooden floor is discolored What is the cause of the discoloration of the wooden fl

This problem is usually caused by soaking in water, and it is often better after drying, but the mark can still be seen. In order to completely solve the problem, the only way to do this is to grind off the paint layer on the surface and repaint it. (But this problem still needs to be solved by a professional painter), if you want to cover it up, it is to ventilate the floor to dry thoroughly, use liquid floor wax to evenly coat, and dry cloth to shine.

Discoloration can be caused by damp mildew, which causes the wood to swell, which can lead to cracking of the floor.

There is no way to solve this, it can only be replaced, or it can be blown dry first, then polished, and then sealed. This will prevent it from spreading ......

Mildew spreads easily! You can use some hygroscopic camphor and so on.

There's no way to save this...

The reality point has been changed, or waterproof measures, painted and waxed or something...

There are many reasons for the discoloration of the floor, such as abrasion, sun exposure, soaking in water, etc., which can be solved by polishing and lacquering or finding someone to replace the discolored floor.

The reasons for fading are as follows:

1. The photodiscoloration reaction of wood (simply put, it is sunburned) The discoloration of wood is mainly caused by absorbing ultraviolet light, and the degree of discoloration of the sapwood of wood and heartwood after absorbing purple lead and eliminating external light is different, which will lead to a certain color difference in the floor after paving.

The resulting photodiscoloration is a normal phenomenon and is not a product quality problem. Therefore, the paved floor should not be exposed to the sun for a long time, and the necessary shading measures should be taken appropriately.

2. Affected by external factors (caused by dampness or heat), most of them are in the local slow heat environment. Before the geothermal floor is paved, the moisture content of most of the ground is about 20%, and in the process of floor paving, due to the damage of the moisture-proof film, a large amount of moisture enters the floor from the damaged place during geothermal heating, resulting in a sharp increase in the moisture content of the floor, resulting in mildew or bluewood degeneration.

The discoloration of the above-mentioned floors is caused by the damp or excessively heated parts of the floor.

1. The ground is uneven, there are uneven small pits, and after the floor is paved, the moisture-proof film is broken, resulting in ventilation. The measure is to scrape the floor flat before installation.

2. When paving, the connection of the moisture-proof film is not tightly adhered to, resulting in air permeability. The moisture-proof film should be glued tightly with tape, preferably with a width of more than 60mm plastic tape, to ensure that the moisture-proof film is not breathable.

3. The geothermal change is too serious, and it is recommended to change it to 24-hour continuous heating disturbance.

Wood flooring is the most popular floor decoration material, although the wood floor is comfortable, the texture is exquisite and beautiful, but if it is used for a long time, it will fade, if it is not treated, it will affect the aesthetics of the home. So how to make up the color of the fading wood floor? What is used to repair the fading of wooden floors?

Next we bring the wood floor to a fading remedy for the introduction.

How to remedy the fading of the wooden floor?

1. Repaint and refurbish.

The paint on the wooden floor will fall off due to too long time, which will affect the beauty of the floor, so the floor must be painted every few years. Before painting, it is also important to remember to polish and dust the surface. Lacquering makes the floor smoother, cleaner and brighter.

2. Re-lay the floor.

There are many reasons for the discoloration of the floor, such as wear and tear, sun exposure, soaking in water, etc., find someone to replace the fading floor. The paved floor should not be exposed to the sun for a long time, and the necessary shading measures should be taken appropriately.

3. Waxing care.

The method of re-waxing can be used to coat a layer of wax on the surface of the wooden floor, and the wax is cured to isolate air, water vapor and dust, which plays the role of complementing color on the one hand, and at the same time plays the role of anti-slip, anti-wear and anti-static, so as to better maintain the floor and prolong the service life of the floor.

What is used to repair the fading of wooden floors?

Shovel spatula + floor wax.

The floor paint falls off, first of all, we can use a small shovel, thin iron sheet or knife to carefully shovel off the paint off the place, and then apply transparent varnish to the primer part, and finally wipe the floor with floor wax, which can not only repair the floor paint, but also play a certain role in maintenance.

Cleaning + repair wax.

First, use a dry rag dipped in vinegar water to scrub the peeling area, then wipe it with a damp soft cloth stained with alcohol or tea, and finally apply the floor repair wax to the peeling area and let it dry naturally.

Polishing + waxing.

If the floor paint doesn't peel off much, you can apply paint to the peeling area, and then polish, wax, and wipe it.

Professional paint repair company.

If the floor paint peels off a lot and it is difficult to repair, then we can directly find a professional floor paint repair company to repair it.

The above is the introduction of the remedy for the fading of the wood floor, if the wood floor at home is fading, then you can consider renovating the wood floor, knocking it off and re-laying the floor or treating it with waxing, and the specific remedy needs to be the actual situation of the wood floor fading. The fading of the wooden floor can be repaired with a shovel + floor wax, washing + repair wax and polishing + waxing.

How to deal with the discoloration of the wooden floor soaked in water: the specific method of soaking the wood floor in water and discoloration is as follows: If the discoloration is serious, it can only be renovated, and the use of large wooden floor renovation machinery to polish several times to remove the paint layer, surface layer, and wood layer, and then carefully sanded to make the floor surface delicate and smooth to reach a new state. The corners of the floor are sanded with a small angle grinder to achieve an overall smooth effect.

Remove the original transparent putty on the side seam and reseal the seam. After the primer is dry, the first topcoat is brushed and left to dry. Carefully grind with sandpaper to grind the surface layer until it feels slightly rough, remove the crumbs, and brush the second coat.

Wait for the last coat to dry and apply floor wax.