How to use the Tianshang set top box, how to set up the Tianshang set top box

Precautions for the use of set-top boxes.

If it is a newly bought TV set-top box, you must not use it immediately, you should first clean the dust on the surface of the set-top box with a dry rag, and then put the set-top box and power adapter in a ventilated place, do not put it directly into the cabinet, and do not block the vent of the TV set-top box, otherwise it will cause damage to the TV set-top box.

When using the TV set-top box, you must not unplug the set-top box when it is connected to the power supply, otherwise it is easy to cause a short circuit in the set-top box. In addition, the TV set-top box cannot be moved when the power is on, if you need to move, you should cut off the power supply first, and then move it after a while.

Tianshang C25 TV network set-top box.

Here's how to upgrade:

The method of manual search is used to upgrade the Tianshang C25TV network set-top box is to unplug the signal line of the set-top box first, and the TV will automatically search, but because there is no signal, the TV cannot search for any electric channel. After that, reconnect the signal cable,Enter the TV menu,Use the ** device to conduct manual search,After the search is completed, the set-top box upgrade will be completed,Return to normal operation。

2. Restore factory settings.

Upgrade: Restoring the factory settings of the Tianshang C25 TV network set-top box is also a way to upgrade the set-top box. The steps of this method are:

First, enter the settings interface, return to the factory settings, and use the manual search method to search. Channel 1 does not have any balance programs, and when you enter channel 2, you will start calling Bi to start with programs and then increase them in turn. The upgrade is successful.

Both of these methods can make the Tianshang C25 TV network set-top box successfully upgraded.

1. Press the "Menu" button of the remote control of the set-top box;

2. Then use the up and down buttons of the remote control, select "System Settings", and "Confirm" button to enter;

3. In "System Settings", use the arrow keys to find "Factory Reset" and click "OK".

4. A password box for entering the password will pop up, and the password will be entered correctly.

5. A dialog box pops up again for the user to confirm whether to restore factory settings, and select "OK";

6. Successfully restore the factory reset system.

Step 1] Press the "Settings" button on the remote control of the set-top box to enter the settings page;

Step 3] Move the cursor to "Advanced Settings" and click OK.

Step 4] Enter 10010 in the pop-up password box and click OK.

Step 5] Move the cursor to "Factory Reset Value" and click OK.

Step 6] Enter 10010 or 6321 in the pop-up password box and click OK.

Step 7] Click the OK button on the prompt "Whether to restore factory value" page and wait for the set-top box to restart automatically.

Enter; 2. On the home page, enter the associated keyword "TV cat" and search;

2. On the home page of the assistant, some associated software will be displayed;

3. Click on the bridge finger to load the next minute;

3. Copy to the peripheral SD card (or USB flash drive) and install it.

2. Connect the SD card (USB flash drive) to the TV;

3. Open the SD card (USB flash drive), click the software you want to install, and follow the prompts to install the software.