Ceramic tile purchase knowledge, understand which questions in advance, less detours do not suffer?

When choosing tiles, you must observe the color in both the light on and off the light, otherwise you will be surprised by the color difference after buying it home. It's best to take it outside to see the effect after seeing it in a tile shop.

Find out in advance what effect you like Glossy or matte The quality of the tile It is best to look for the ceramic tile from Foshan, Guangdong When choosing, it is best to observe the two situations of turning on and off the light.

Be sure to go to a regular place to buy, to choose shopping, the quality is very good, the color is very good, and when choosing the floor, you must choose according to the layout of the home.

First, you have to look at the incision, second, choose the most expensive one, third, choose the brand, fourth, choose a good reputation, and fifth, choose the manufacturer.

When choosing tiles, be sure to choose uniform color, very good quality, and higher density should choose such tiles.

First of all, look at whether the color on the surface of the tile is uniform, whether the tile is flat, and whether the size is consistent

Compared with many owners who buy ceramic tiles, they will more or less have heard that the people around them strongly recommend that they should choose Guangdong bricks to buy ceramic tiles. Indeed, Guangdong as the first domestic ceramic industry, not only has a rich and good quality of raw materials network resources, as well as the influx of various talents, and its strict ceramic tile commodity internal control product standards, which have made Guangdong's ceramic tiles famous all over the world.

However, with Guangdong bricks, not necessarily the quality of the tiles produced by each factory is of high quality. Many Foshan shipping tiles do not even have to be produced in Guangdong. It is also because of the fame of Guangdong bricks, especially the ceramic tiles in the Foshan region, whether in the scale of production and operation, technical strength and other aspects are first-class in the large region, so many small factories in Jiangxi, Fujian, Shandong can be packaged to get Guangdong to sell, the outer packaging of the product is attached to the production of Foshan, Guangdong, so that the quality of the ceramic tile is difficult to ***.

Therefore, if you want to pick high-quality Cantonese bricks, you have to learn to identify the authenticity. Indeed, Guangdong bricks, the above will be marked with a detailed address of production, the state stipulates that the production address can not be marked at will, and there is a 3C certification certificate glued or printed on the reverse side of the tile, which is also the product according to the quality certification mark. Each logo has a corresponding number, and customers can view it according to China's quality certification standards.

Most people think that the harder and stronger the raw material means better, but in fact, the harder the tile, the better. Naturally, thin tiles also have defects, easy to crack or destroy, and the bearing capacity and lethal resistance are very poor, but too thick tiles are usually difficult to calcin, which also means that the tiles are very easy to calcine incompletely, and the phenomenon of unscrupulous in the middle is high.

In fact, the state also has a unified standard for the thickness of ceramic tiles. Therefore, it is not that the harder the tile, the better, and the harder the tile, the stronger it will be. Thickness is never the main parameter to consider the quality of tiles, too thick tiles will make resources wasted.

In turn, we should pay more attention to the flatness, bearing capacity, water absorption and other aspects of the tile.

I don't know if you have noticed, the whiter the stainless steel tableware, the higher the sales, so many people will feel that the whiter the color of the tile body, the better the quality, because the reason for the white is because the brick embryo residue is less and pureer. In fact, this is not the case. The origin is different, the raw materials are different, and there will be a certain level of harm to the color of the brick embryo.

The fineness of the tile body is not necessarily matched by the quality, and we should not use this alone to measure the quality of the tile.

Besides, our country's red billet raw materials are more abundant than white billet raw materials, often we find some more yellow green bodies when buying ceramic tiles, and the removal of one side is indeed due to the fact that some high-grade ceramic tiles are more specific in the process of impurities and the time of firing is longer than ordinary bricks, in fact, in most cases only because the producers have carried out hands and feet in it.

When choosing tiles, we try not to choose tiles that are too small, we should choose larger ones, so that they are easy and atmospheric to lay. The color should be chosen according to your own decoration style.

Guangdong brick must be the best, real Guangdong brick, there will be a production address written on it, the state stipulates that this production address can not be labeled, and there is a 3C certification mark pasted or printed on the back of the tile, which is a mark that the product has passed the quality certification. The thicker the tile, the better.

Cantonese bricks must be the best; The thicker the tile, the better. The whiter the better; The more expensive, the better.

When choosing tiles, try to choose tiles made in Guangdong. As Guangdong as the first domestic ceramic industry, and the province still has a lot of porcelain raw material network resources, at the same time Guangdong also has strict internal control product standards for ceramic tile products, which means that the quality and safety of ceramic tiles made in Guangdong are guaranteed.

However, it is important to note that not all "Cantonese bricks" are actually manufactured in Guangdong. Now most of the fake Guangdong bricks are likely to be produced and manufactured thousands of miles away from Shandong Province. All in all, most of the provinces and cities that are getting farther away from Guangdong have a greater chance of buying fakes.

If you want to distinguish it, it is recommended that you choose whether there is a logo on the reverse side of the tile, and the detailed address in the packaging wooden box The place of origin of production and manufacturing (rather than the enterprise address or operation center) is not in Guangdong, and the detailed address should be printed.

In addition, the contact ** can not be a personal mobile phone number, if Guangdong's fixed ** or 400, the packaging wooden box to see whether there is a 3C radioactive material level A mark, this kind of tile is more reassuring.

In recent years, many families will choose to choose the design without the main lamp, and the texture of seeing the light without seeing the light is really good-looking. However, if you want to choose this lighting design, remind everyone to choose smooth tiles carefully, because the large rollover rate is very high.

The design without main lights will use a large number of track spotlights and ceiling lights to replace the original main lighting fixtures, so when the lighting effect hits the material tiles on the glossy surface, it is easy to reflect the light, so all the roofs will set off a mottled light and shadow, which makes people's eyes particularly uncomfortable. Therefore, it is more recommended to use matte tiles for the home of the design lighting fixtures without main lights.

Usually the living room and dining room location everyone will choose straight paving bricks, large and model square tiles, some people will think that 900 * 900 is higher and stronger, but to be honest, the actual effect of 900 * 900 paving is not much different from 800 * 800, ** is a little more expensive. Don't think that a little bigger can save a little tile, in fact, it is more difficult to pave large bricks, so the labor cost in the middle and later stages will not be cost-effective.

The two are cost-effective, and it is recommended that you paste 800 * 800, naturally, the rich do not need to consider the size of the bricks if they are not short of money, and directly buy the large model of bricks * 1800, the texture is widened and heavy, and it appears to be air.

Generally speaking, when we pave tiles, we can not just count the total number to buy, we must prepare more, because the tiles will have a certain amount of wear and tear in the paving process, especially large-size tiles, usually more than 10% of the wear and tear!

Some people say, use and then buy on the line, I want to tell you that each production batch of ceramic tiles is likely to have different textures, but also there will be color casts, due to the raw materials may be some differences, if you don't want the final decoration to be affected, when buying tiles must be increased by about 10% under the premise of the total area of the standard. You can ask the return and exchange criteria before choosing, so that the remaining tiles will not be consumed.

If you choose a home without a main lamp, choose bright tiles carefully. Choose tiles produced in Guangdong whenever possible. Often the location of the living room and dining room will choose to pave large bricks. It is necessary to understand clearly in advance in order to avoid detours on the road of decoration.

1. The choice of ceramic tiles depends on the place of origin. 2. Choose a family without a main lamp design, and carefully choose bright tiles. 3. On cost performance, 800 * 800 specifications are better than 900 * to buy tiles can not be "just right".

That must be how about the quality of this tile? You get what you pay for, does the tile company have an understanding of these architectural knowledge?

First, what should be paid attention to when choosing tiles?1. Pay attention to the appearance of tiles when choosing. When you choose tiles, you must pay attention to the color of the tiles, and touch the flatness of the tiles with your hands, because under normal circumstances, the clearer the color of the tiles, the better the quality, and then look at whether there are small holes or black spots on the tiles.

3. Pay attention to the firmness of the tile surface. There is definitely no problem with the quality of good tiles, so when you pick responsibility, you can directly take a slightly harder thing to scrape the surface of the tile, and the surface of the tile will generally have a layer of glaze, and it will not be bad if you scrape it a little, so that you can also judge the quality of the tile.

2. ConclusionTherefore, we must pay attention when choosing tiles for decoration, do not blindly only ask for the lowest quality, and be sure to choose a wear-resistant ceramic tile, otherwise there will be cracks in the tiles after a year and a half.

How to choose original tiles 1, check the label: the product packaging box should be marked with the factory name, address, product name, after-sales service **, specifications, quantity, trademark, production date and the implementation of the standard, in the purchase of porcelain tiles, need to check whether there is a 3C certification mark, for interior design and decoration of ceramic tiles, it is advisable to choose radionuclides that meet the requirements of class A products.

2. Take a closer look at the appearance: the glaze of ceramic tiles with excellent quality should be smooth and delicate, the glossy glaze should be crystal shiny, and the matte glaze should be soft and comfortable. Under sufficient natural light or fluorescent lighting, the brick should not be visible if it is placed vertically at a distance of 1 meter, and no obvious glaze defects should be visible.

The pattern of ceramic tiles with patterns should be delicate and realistic, and there should be no obvious defects such as lack of color, broken lines, and dislocation. The shading and trademark on the back of high-quality ceramic products are clear and complete, and there are basically no glaze marks or defects.

3. Splicing effect: good tiles usually have a small size deviation, and users can put a batch of products vertically on a plane to see if there is any uneven phenomenon. Look at the flatness again, you can put the edges of the two bricks close together to see if there are any gaps.

Good products will not be deformed, and the brick surface is smooth and beautiful after paving. In addition, users can also look at the color difference of the product, take a few bricks and put them together, and carefully look at them in sufficient light.

4. Tapping and listening: users can gently tap the tile and listen carefully to its sound, and the better quality products sound crisp and pleasant. Poor quality products due to improper use of raw material formula, short firing cycle, low firing temperature, and "empty" sound when knocking.

5. Weigh lightly: check the weight of the tile, usually the same specification of the tile, the weight of the water absorption is low, and the internal quality is also better.

When choosing, it is necessary to look at the brand, the smoothness of the surface of the tile, and the production date of the tile. It should be noted that according to your own decoration effect, you should choose the color, and the waterproofness must be good.

Try to choose black or gray and white size, which will look better, and the overall effect will be better, more popular, you must pay attention to the quality when choosing, and you should also pay attention to the size of the finished product.

You should choose according to your own financial situation, as well as the decoration style of the family, try to choose better quality tiles, when choosing, you must pay attention to the quality of the tiles, but also pay attention to the choice of brand, understand the knowledge about the tile, pay attention to the color of the tile, and pay attention to the distribution of the area.

Look at the abrasion resistance, slip resistance and dirt resistance of the tiles. The tiles are different for different subjects.

1. The wear resistance and anti-slip properties of the whole brick are good, but they are easy to get dirty. Suitable for balconies, kitchens, bathrooms.

2. The surface of the polished tile is smooth, the hardness is high, and it is not easy to scratch. Suitable for living rooms, background walls and balconies. However, due to its weak stain resistance, it is not suitable for kitchens and bathrooms.

3. The surface of vitrified bricks is smooth, wear-resistant and stain-resistant. Compared with other kinds of tiles, the slip resistance is relatively poor. Suitable for living rooms and foyers.

4. Antique bricks have high strength and wear resistance. However, it is a test of the design control ability and laying effect. Suitable for living rooms, bedrooms and balconies.

Of course, in addition to looking at the material and functional scope of application, also look at the brand and after-sales service. It is best to choose a big brand with a good reputation.

Tile. It's a decoration digging feast.

Not only is the overall cost high, but if there is a problem, the loss will be very large. Therefore, when purchasing, we must understand some purchase methods and pay attention to some details, so as not to suffer losses.

How to buy:

1. The color of the tile should be uniform, the surface finish and flatness should be good, the surrounding rules should be judged by the silver rules, the pattern should be complete, no color difference, deformation, no black spots, and no obvious impurities.

2. Judging according to the density of the tile, the heavier the better under the same volume, and the smaller the volume under the same weight, the better.

3. Drop water or tea on the back of the tile, see how fast the water is soaked after it spreads, generally speaking, the slower the water absorption, the greater the density of the tile, the better the quality.

Precautions for choosing tiles:

1. Calculate the loss when buying, it is best to buy a few more pieces, in case the brick is damaged, it can be made up, and there will be no color difference. Negotiate with the merchant to refund more and make up for less.

2. Floor tiles. It can be used as wall tiles to pave the wall, and the wall tiles cannot be underground.

3. It is best to inspect each box when the tile is accepted, especially the large bricks, and the quality problems found afterwards, some businesses do not admit it, and the loss will let the consumer pay for it. If you are really in a hurry, you can use the method of shaking the box, and if there are bricks in the box, you can hear abnormal sounds.

4. Flower tiles. and waistline.

**Expensive, it is recommended to use less.

5. Cabinets. Some of the back bricks that are blocked by the cabinet can be used with a lower variety, or let the merchant send some stock bricks to save the budget.