How to check your Internet speed and bandwidth Details 0 3

Hello, if you are a China Unicom broadband user, you can learn about it through the speed test in the following ways:

1. You can log in to the online business hall.

On the home page, click "My Unicom" - "Convenience Service" - "Broadband Speed Test" to test the speed according to the prompt information on the page.

2. Use the broadband number to log in to the client of China Unicom's mobile phone business hall - query - broadband business query - test immediately (the "broadband speed test" service does not support free flow for the time being).

I use telecom Internet access, 120 monthly adsl ordinary broadband dial-up, telecom said it is 2m, but I feel very slow, check my Internet speed, also.

But since a large part of it is non-local, then the measured speed is every.

All ** are different, and there are big differences. It's also well understood, lines and other reasons, would.

If it affects the speed of the network, other speed tests that can be measured accurately are still in the area by yourself.

VIP mailbox of the place. There are also local telecommunications companies that specialize in testing software, like this.

will be a little more accurate.

Telecom (Netcom) refers to the speed of 512 or 1m, they are not.

The speed is 220k then 200x8=1600 plus a line or other loss, that.

Your internet speed is 2M. You can check your bandwidth by your approximate speed.

First of all, the broadband of the Internet, there is no way to see it directly, but the speed can be tested, usually from the speed of other software or files, there are many software to test the speed of the network, generally **test, but because a large part of it is non-local, then the measured speed is different for each **, and the difference is very large. This is also very easy to understand, line and other reasons, will affect the network speed, other speed measurement is more accurate or to test in the local **** file, such as what information you have in your local port or local VIP mailbox. There are also local telecom companies that specialize in testing software, so that it will be a little bit more accurate.

The network speed referred to by Telecom (Netcom) is 512 or 1m, they refer not to the number of bytes but to bits, a byte is composed of eight bits, that is to say, your **speed to be multiplied by eight is the network speed that Telecom said. For example, if your local file speed is 220k, then 200x8=1600 plus a line or other loss, then your network speed is 2m.

You can check your bandwidth by your approximate speed.

Software used: 360 Security Guard.

1. Generally speaking, when testing the network speed, you need to use a third-party tool to open the 360 floating window of the desktop, and then select the "Traffic" layout.

2. Next, in the pop-up interface of the software, select the function tab of "Test Network Speed".

3. Then the software will automatically pop up the interface for testing the network speed, and the automatic speed test will begin.

4. After the speed test is completed, you can see your network speed.

How to measure the speed of mobile broadband with a mobile phone?

Here's how to test the bandwidth speed of a computer:

1 Install 360 Security Guard software first.

2 Turn on 360 Security Guard - click on the broadband speedometer in the red wireframe position shown below.

In the Control Panel, open the Administrative Tools window, double-click Event Viewer with the mouse, right-click the System item in the left list of the Event Viewer window that appears, select the Properties command, select the Filter tab in the pop-up System Properties window, select RemoteAccess for Events, select All for Category, and click OK to return to the Event Viewer window. In the window on the right, the start and end time of each Internet access will be listed, and every two is the end and start time of each Internet access, the difference between these two times is the cumulative time of one Internet access, and by viewing the date, we can also calculate the total number of Internet access times and time in a certain day or month. If you want to save this information, you can save it to a text file by right-clicking on the System and selecting the Export List command from the shortcut menu.

There are still some problems related to more signal interference... Hehe.. In fact, the speed is still slack.

Hello, Anhui Telecom users can directly log in to the telecom online business hall to check their broadband rate, users open the Anhui Telecom online business hall, log in to their broadband account, log in to the personal center, and then the user can slide down the page to view their own broadband rate and installation address and other information.

1. If you want to run broadband Internet speed, you can enter the running program on the computer, enter cmd, and then type ping + space + your IP address (+ sign does not need to be entered), and press the enter key.

2. If you are a China Unicom broadband user, you can log in to the online business hall and click "My Unicom" - "Convenience Service" - "Broadband Speed Test" on the home page to test the speed according to the prompts on the page. You can also use the broadband number to log in to the client of China Unicom's mobile phone business hall - query - broadband service query - test immediately (the "broadband speed test" service does not support free streaming).

Generally, there will be no problem with how much bandwidth the telecom (or other network providers) will give you. If you suspect that they are cutting corners, you can go into the modem to check it out. If it's a router, you have to plug the modem directly into it to see it.

And you have to manually set up an IP and DNS (how to set it should know it).Then turn on IEEnter it in the address bar and you will be prompted to enter your username and password.

The usual modem name and password are adminThere's a "up, down" when you go in, and you look at what the downside is. That's your bandwidth.

It's not fake to have a view here. Absolutely true. At a glance, you can tell if the telecom has stolen your work and reduced your material.

The view here is the most accurate. Most speed test software measures the speed of the network, not the bandwidth. It's a different concept.

My cat also shows 100mbps Generally speaking, it's a cat thing, and no matter how high it shows, telecom only gives you so much or the same.

Actually, it was only 2m

Up to 256 kb s can be achieved

1Mbps (1024) 8 = 128kb S2Mbps (2048) 8 = 256kb S4Mbps (4096) 8 = 512kb SS represents seconds, these are the highest times, generally 2M speed is 200 to 256 is considered very good.

1m is 80 to 128.

See for yourself...KB S 8 is the speed of your home broadband!

But if the line is far away, then there must be signal loss, and the actual problem is to call customer service.

How many m of Netcom or Telecom to know, you have to check your computer Internet speed, you can test **speed 1s ?It's about 70k, and 1m is about 120-150, of course, it depends on the resources of the server. The 2m one is probably 220-380, maybe it can be a little higher.

To start, run cmd to enter dos and enter ipconfig to press enter.

This is to check the IP, not the speed test, you go to enter this into the IE, look at the following instructions, it is very convenient, you can query the network speed, 1m80kb, 2m160kb, and the rest are calculated by yourself.

You can log in to the online business hall of the telecom to test the speed.

512 broadband speed test: 40kb or more.

The broadband speed measurement of 1m is: 65kb or more.

The broadband speed measurement of 2m is: 135kb or more.

The broadband speed test of 3m is: 256kb or more.

The broadband speed measurement of 4m is: 384kb or more.

The broadband speed measurement of 10m is: 500kb or more.

If the above speed cannot be reached, it means that the network speed is slow, call the operator to solve it!

Using an Internet speed measurement software, multiply the average value by 8 to get the approximate broadband size. For example, if the speed is about 512, 512x8 = 4196 = 4m, which is what we understand as 4m broadband.

Do not use the so-called bridge speed measurement software or speed measurement**.

For example, if the speed is about 100 kb s after stabilization, then the bandwidth is 1 megabyte.

If it's about 200 kbs, it's 2 trillion.

And so on.

Find a speed measurement software, you can find 360 or Thunderbolt, etc.

The calculation method of broadband, from the pure town to the network transmission is bytes, that is, byte is a small stare late written b,,The said megabytes are also according to this,However, what we usually say and measured on the computer are bold words that are bits,It is a capital b,The difference between them is 8 times,That is, a word is equal to eight bytes,So the measured rate should be multiplied by 8 to get the actual value of about equal to a few trillions is a few trillions。

1. Find the detection software installed on the computer, here we use 360 software as an example, the following picture is a 360 floating box.

2. Click the hover box and click the "Internet Speed" option on the page that appears.

3. After that, click on the "Test Internet Speed" option in the lower right corner.

4. Wait for the speed test program to run, this process is about 10 to 20 seconds.

5. Wait to see the network bandwidth data of the current computer.

Connect the cat directly to the computer, enter it in the IE address bar, the username and password are admin, and then you can see the rate of up and down. 2048 means 2m, 1024 table is 1m, and 512 means half m is 512k. If you can't log in, change the local address to try again.

1. Control Panel - Network & Sharing Center - Change adapter settings, local or wireless connection, right click, status, speed There is the bandwidth.

2. If it refers to a broadband connection, the computer cannot view the bandwidth, and can only use the network speed test software to obtain an approximate value, and the accurate bandwidth needs to consult the broadband service provider or check the installation contract.

Brother, if your 4M broadband needs to be set in the route, the standard should be calculated in bps (or b s). The answer you're using is the rate described by the software. That is, 4m with a pure talk width, ** speed theoretical value of 512k, of course, in actual operation, because of many factors such as line and network card, computer performance itself, it is impossible to achieve this worth, but occasionally it will be reached, this is called the peak, is virtual, that is to say, in fact, it has not been reached.

Okay, let's get back to the point, in the router reset, 4M broadband, its downlink bandwidth is 4Mbps = 4096Kbps, (1024 Kbps x 4). If it is cell broadband, the uplink and downlink should be the same, which belongs to the symmetrical line. If it is the first line to open, that is, ADSL, it belongs to the asymmetric transmission network, and the uplink bandwidth needs to be tested in practice, and there is no unified statement at present, some conclusions say that it is the highest 512kbps, and some say that it is 640kbps.

If you fill in the number 512 directly in the route, you will find that other people can't even open the web page! For example, if you fill in 512, the result is 512bps, just imagine, 512bps<1kbps, your downlink bandwidth is 4096kbps, is it a bit ruthless to start?

Of course, if there are routers that use kbps to calculate, it is a different matter, just convert! (1kbps=8kbps)

You can log in to the official website, and there is a scalar uplink and downlink bandwidth of an operator on the official slip hold network.

It is also possible to test uploads, such as telecommunications:

4M is the total downlink bandwidth of 2048, if the router turns on the function of self-surplusing imitation distribution network speed, it will distribute the ** speed of each brigade in the two vertical fiber computers.

Is the 4 megabit bandwidth exclusive to you? The downlink traffic of one megabyte bandwidth is 128 K in standard time. If you are four trillion, it should be 4x128=512k, and the left car will never be right.

That's normal. This value varies depending on the time of day. The value will be smaller during peak periods and larger during idle periods.

So you just have to control it with this value. Fighting is basically that your internet speed is not limited by others. Generally, one trillion of broadband is basically enough to play online games.

As long as the broadband uplink is 512KB, the downlink is 4*1024KB=4096KB

This is theoretical data.