What is the proportion of pure monomer resin used in plastics

Updated on Financial 2024-08-08
14 answers
  1. Anonymous users2024-02-15

    Difference Between Resin and Plastic:

    1. Plastic: refers to the material that can flow and form in the process of processing with resin (or direct polymerization with monomer in the processing process) as the main component, and additives such as plasticizers, fillers, lubricants, colorants and other auxiliary components in the processing process, and can also be said to be plasticity materials and products with resin as the main raw material. Plastic generally refers to finished products, such as plastic cups, plastic bowls, etc.

    2. Resin: refers to raw materials, such as polyethylene resin, polypropylene resin, polyester resin, etc., but in general, the two terms plastic and resin can be used universally. So, it can be said that plastic is resin, and resin is plastic.

    It can be seen that resin is one of the raw materials of plastics, and plastics are the finished products of resins. In other words, what is not molded is resin, and after molding, it is plastic.

  2. Anonymous users2024-02-14

    This question is not very clear, UV aging requirements are the requirements of the product use environment and plastic parts, so these must be clear, and the choice of plastic materials is not the same as adding UV.

  3. Anonymous users2024-02-13

    The first part, it depends on what variety.

  4. Anonymous users2024-02-12

    The addition of plastic fillers depends entirely on the cost control and quality requirements of the manufacturer, and there must be relevant process specifications for standard control, not as much as you want to add.

    There are many types of fillers used in plastic resins, and the more commonly used are solid materials such as granular, flake, and fibrous, which are mainly used to increase the volume or quality of plastic products to reduce the manufacturing cost of plastic products. In addition, there are some special functional fillers, which are added to improve the physical properties, mechanical properties and functionality of the product, such as electrical conductivity, thermal conductivity, flame retardant, lubrication, thermal insulation, insulation, shock absorption, sound insulation and other properties. The following conditions should be paid attention to when selecting fillers.

    1) The resin raw material is filled with human filler, which does not react chemically with resin and additives, and has a small ability to absorb plasticizers. (2) It does not affect the performance of resin and the quality of molded products. (3) It has appropriate fineness, can be evenly distributed in the resin, and does not contain crystal water.

    4) The amount of filler should be appropriate, so that there can be no problems with the product.

  5. Anonymous users2024-02-11

    This depends on the product and the application.

  6. Anonymous users2024-02-10

    Look at what products are made, generally available in PVC resin: 50 to 100 copies (per 100 parts of resin) View the original post

  7. Anonymous users2024-02-09

    Because plastic products should be matched with color, plastic raw materials can be divided into: granulated materials, toners, color materials, and recently appeared liquid coloring in plastic raw materials.

    Granule raw material is to have mixed the pigment into the raw material, each plastic material has been colored, so the color of the product is stable and uniform, toner and color seed material is to mix the color or toner to make it achieve the specified color.

    Acrylic pigment belongs to synthetic polymeric pigments, invented in the 50s of the 20th century, is made of pigment powder and acrylic latex. Acrylic latex is also known as acrylic resin polymerized latex. There are many types of acrylic resins, such as methacrylic resins, and there are also many types of acrylic paints.

  8. Anonymous users2024-02-08

    Professional questions to find professional manufacturers, Chenmei pigment masterbatch manufacturers mainly produce plastic pigments and masterbatches, can help you answer professional and technical questions. 158/168/96316.

  9. Anonymous users2024-02-07

    There are more common varieties such as yellow 12 14 83, orange 13 34, red 53 48 254, blue, green, purple, etc., and of course there are many more, which can be matched with various colors of Pantong Raul. The first pigment is also based on the structural properties of the pigment from low to high, high-grade pigments have high temperature resistance, good light resistance, and good weather resistance; Economical pigments, **affordable, high tinting strength. o( o Ha For more professional answers, please contact Shanghai Shengqi International ******, product service:

    Shanghai Shengqi International ****** mainly sells pigments, dyes and additives for plastics, coatings and inks. We are committed to providing customers with excellent products and services. We focus on pigment innovation and application solutions in various fields to improve pigment quality and pigment application performance. Thank you!

  10. Anonymous users2024-02-06

    Commonly used types of plastics.

    62616964757a686964616fe59b9ee7ad9431333236356538

    ABS: commonly known as engineering plastics, can be used for connectors, seat backs, seat boards, it is the main raw material for electroplating (water plating) in plastics.

    PP: Common name polypropylene, used for five-star feet, handrails, foot pads and connectors with low strength requirements. Disadvantages: poor wear resistance, low surface hardness.

    PVC: commonly known as polyvinyl chloride, mainly used for edge banding and insertion conditions. It is suitable for extrusion molding, and at the same time, PVC material is a non-combustible material in plastic parts, and the temperature stability of processing and molding is poor, especially the stability of color is not good.

    PU: common name polyurethane. It is mainly used for handrail (foam) accessories.

    POM: Common name Saigang. It is mainly used for wear-resistant parts such as foot pads, casters, door hinges, hinges, etc. The performance is wear-resistant and pressure-resistant, but the dimensional stability is poor.

    PA: Common name nylon. It is mainly used as foot pads, five-star claws, casters and other wear-resistant places with high life requirements.

    Features: wear-resistant, pressure-resistant, high-strength indoor service life, individual models such as PA66 high temperature resistance up to 2200, the disadvantage is that it is easy to change the performance in the sun, easy to break, and poor weather resistance.

    PMMA: Plexiglass (commonly known as acrylic). There are five kinds of transparent materials in plastic, and PMMA is one of the most transparent, the workpiece has an acetic acid smell when cutting, it is easy to process and deform, and it can be shaped and bent by soaking it in boiling water.

    Disadvantages: the surface is easy to scratch, the hardness is low, it is easy to crack when bending, ** more than 20% higher than ABS.

    PC: commonly known as polycarbonate. This variety is also a transparent material, with high surface hardness, scratch resistance, impact resistance, high strength, and good weather resistance (that is, it is not afraid of sunlight).

    The screen partition and sunlight panel in the furniture are hollow extruded from this material. Features: High cost, about 40% higher than PMMA.

    China Plastics Network.

  11. Anonymous users2024-02-05

    Synthetic resin is a type of plastic.

  12. Anonymous users2024-02-04

    According to the different uses, PVC plasticole plastics are often divided into: non-plasticized PVC, plasticizer content is 0; Rigid PVC, plasticizer content less than 10%; semi-rigid PVC, plasticizer content of 10-30%; soft PVC, plasticizer content of 30-70%; Polyvinyl chloride paste plastic, plasticizer content is more than 80%.

  13. Anonymous users2024-02-03

    The plasticizer content of soft PVC refers to PVC products with more than 25 parts.

    The specific gravity can not only be for the plasticizer, although the plasticizer and PVC account for a large proportion (according to the product and the formula is different), but the specific gravity is calculated according to the proportion of the whole formula contained in the proportion of each raw material, the proportion is significant, the first to analyze the raw materials of the formula, can not simply say that the plasticizer is the cause or PVC reason.

  14. Anonymous users2024-02-02

    Generally, the content of plasticizer is more than 30% of the content of PVC, and it is considered that this material is soft PVC, which is also what we call 30 parts or 30PHR

Related questions
4 answers2024-08-08

There are two types of epoxy resin glue commonly used to make wooden tables: transparent type and padded type. >>>More

13 answers2024-08-08

When choosing an epoxy adhesive, a number of factors should be considered. Here are some small experiences that I hope will help you. As a high-performance, high-value-added adhesive, epoxy resin adhesive is highly valued by the industry, but at the same time, counterfeit and shoddy products are often patronized. >>>More

5 answers2024-08-08

The question of whether it is good or not, and who is better, is a matter of opinion. Generally, the organization's qualifications, industry experience, external resources, and successful cases should be comprehensively evaluated and considered. It needs to be measured from the aspects that you are currently concerned about, and it cannot be said in one sentence or two. >>>More

7 answers2024-08-08

Resin tile ** and thickness, number of layers, material ratio and sales of services. The same 30mm thickness resin tile, made of ** material ** can be as low as 20-35 yuan per square meter, the new material resin tile in the market ** 40-55 yuan per square meter per square meter. **The quality of the material resin tile is poor, the life span is not more than 5 years, and even more only a few months, and the life of the new material resin tile can reach 30 years. >>>More

4 answers2024-08-08

Phenol + formaldehyde === phenolic resin (catalyst will only affect the shape of phenolic resin), phenolic resin is a polymer compound, the principle is as follows: phenol OH on phenol will affect the hydrogen on the ortho position on the benzene ring, so that the h on the ortho site becomes more active and easier to react, so the reaction is equivalent to the benzene ring is two and a half bonds, and the carbon-oxygen double bond in formaldehyde is broken at the same time, and the benzene ring is two and a half bonds combined, and there are multiple polymers of such monomers to form phenolic resin. >>>More