How to set the charging animation of Huawei Mate30

The HUAWEI Mate30 charging animation is displayed by default by the system and cannot be set. The mobile phone charging animation will only appear when the phone screen is off, and it will disappear automatically after a while.

HUAWEI Mate30 Correct Charging Method: Charge as you go, be sure to use the original charger and charging cable;Don't play with your phone when charging, don't wait until the low battery state to charge the battery to prolong the life of the battery;When the battery is fully charged, it is enough to disconnect the charger in time. Huawei Mate30 has overcharge protection, you can use it with confidence, but if the conditions are possible, it is still recommended to unplug the charger after charging is completed.

How to set the phone charging animation:

Once you've opened System Settings, tap Enter, select General, and tap AssistiveTouch.

Find the feature in AssistiveTouch and show the charging animation.

Method Steps:

1.Let's start by opening the desktop of the phone of the Huawei Mate30 to find the settings and open it.

2.Second, we find the battery option in this page of settings and turn it on.

3.After doing the above two things, we find the display of the charge percentage on this page of the battery.

4.In the last step, we click on the battery percentage display method and set it according to our own ideas.

This charging animation is not a special point,Your Lenovo charger it has a charging animation,Generally as long as the charging effect,Your mobile phone supports fast charging,There are special charging characteristics,If you don't have fast charging when you connect to it,It means that you don't support fast in the charger may not be original or broken.。。。。

Once the wireless charger is powered, charge it directly by placing the phone screen facing up in the center of the charger or in the manufacturer's recommended location.

1. Open the settings program on your phone's desktop.

2. After entering the settings, click on the battery option.

3. After entering the battery, you can see that the power-saving mode and the super power-saving mode are both off.

4. Turn on the power-saving mode function first.

5. Then turn on the following super power saving function.

6. When the super power saving function is turned on, a window will pop up, click to open it. This successfully sets up the super fast charging animation.

Huawei Technologies****.

It was officially incorporated in 1987 in Shenzhen, China. Huawei Technologies **** is a private communication technology company that manufactures and sells communication equipment, headquartered in Longgang District, Shenzhen, Guangdong Province, China.

Sakata Huawei base. Huawei's products mainly involve switching networks, transmission networks, wireless and wired fixed access networks, and data communication networks in communication networks.

and wireless terminal products, providing hardware equipment, software, services and solutions for telecom operators and professional network owners around the world.

The Huawei charging animation is displayed by default by the system, and the charging animation will appear only when the phone screen is off, and cannot be set manually.

Huawei Nian Sleepy P40 battery is 3800mAh in the morning, supports ancestral Qique wired super fast charging, charge as you go, be sure to use the original charger and charging cable; Don't play with your phone when charging, don't wait until the low battery state to charge the battery to prolong the life of the battery;When the battery is fully charged, it is enough to disconnect the charger in time. Huawei P40 has overcharge protection, you can use it with confidence, but if the conditions are possible, it is still recommended to unplug the charger after charging is completed.

Note: This article uses the Huawei P40 mobile phone as an example, which is applicable to EMUI systems.

This topic uses Huawei P40 as an example for EMUI systems.

The Huawei Mate30 mobile phone supports wireless charging and wireless reverse charging, which can be used for other smart devices around you, such as mobile phones, Bluetooth headsets, and more. So how to turn on Huawei Mate30 wireless charging? Let's take a look

Huawei Mate30 wireless charging does not have the option to turn on, you can directly use the wireless charger to charge, only wireless reverse charging needs to be turned on in the phone's battery settings.

The specific steps are as follows:1. Open your phone's settings and tap [Battery].

2. Turn on the switch on the right side of [Wireless Reverse Charging].

This article uses the Huawei Mate30 as an example for HarmonyOS.

The entire Huawei Mate30 series supports wireless charging.

Huawei Mate30 is the same as Talk Mate30Pro, which supports 27W Huawei Super Wireless Fast Charging, which is faster than ordinary wired fast charging. The slag-containing mobile phone is equipped with a Kirin 990 processor, using the world's first commercial flagship 5G SoC chip, adding 5G baseband, running 6G memory, and a battery capacity of 4200mAh.

In terms of cameras, the Huawei Mate 30 has a super-sensitive Leica triple camera at the rear, which are a 16-million-pixel ultra-wide-angle camera, a 40-million-pixel wide-angle super-sensitive main camera, and an 8-million-pixel telephoto camera.

Problems that should be paid attention to when buying a mobile phone:

1. When buying a mobile phone, don't be confused by the high resolution advertised by the business, look at the mobile phone from a few more angles to feel it, and feel that the picture is comfortable for your eyes is a suitable mobile phone.

2. The quality of the photo, in addition to being affected by the pixels, the quality of the lens, the sensor, the image processing technology, etc. all play an important role. For example, the sensor has a decisive impact on the imaging quality, under the same resolution, the larger the sensor area, the more light intake, the better the quality.

3. The performance of mobile phones is closely related to the CPU, but the number of CPU cores is only a part of the CPU parameters, and the main frequency, pipeline architecture, cache design, etc. also affect the performance of the CPU.

1. Smart charging mode.

In the intelligent charging mode, the system will automatically learn your charging habits and carry out intelligent charging management to avoid the battery being fully charged for a long time, so as to delay the aging rate of the battery and prolong the service life of the battery.

It is recommended that you turn it on!

When this function is turned on, the charging speed at night or when the system automatically recognizes your habits will reduce the charging current, thus protecting the battery by reducing the charging power!

For example, smart charging is aimed at users who are accustomed to night charging or long-term charging, when the user rests at night, charging to a certain proportion will be suspended, and when the user gets up for a period of time, it will resume charging to 100% full, reducing the night battery full charge time, so as to delay the battery aging rate and prolong the battery life.

Your charging habit information will only be used locally, and will not be backed up or uploaded to the cloud, so please feel free to use it.

2. Intelligent peak capacity.

When you enable Smart Peak Capacity, the system will intelligently adjust the maximum usable capacity of the battery in the current state according to the health status of the battery, so as to delay the aging rate of the battery and extend the service life of the battery.