What are the tips for cleaning the bathtub?

As people's requirements for a comfortable life are getting higher and higher, bathtubs that can bring people a sense of relaxation and comfort have entered more and more households. According to its material, bathtubs can be divided into acrylic bathtubs, steel plate bathtubs and cast iron bathtubs. In the process of bathtub use, the maintenance and cleaning of the bathtub is indispensable.

So how to maintain and clean the bathtub of different materials? 1. Cleaning frequencyWhen cleaning the acrylic bathtub, use a sponge or flannel cloth, do not use coarse cloth, scouring pad, do not use any cleaning agent containing granular objects, and it is best to avoid direct sunlight and contact with high-temperature cigarette butts. Use a mild detergent (e.g. dish soap) instead of abrasive detergent.

Acrylic bathtubs can also be cleaned with glass water. Cast iron bathtubs should be thoroughly rinsed with clean water after each use and dried with a soft cloth. If you encounter stubborn stains, you can use a small amount of abrasive cleaning agent to clean them.

Use a soft nylon brush to clean the bottom non-slip surface. Do not scrub with steel wool, wire brushes or abrasive sponges. 2. Gentle treatment of surface stains can be used to brush the surface with a discarded soft-bristled toothbrush dipped in bleaching powder, which can not only remove stains, but also eliminate mold.

If you encounter a stain that is difficult to erase, you can also wipe it with half a lemon dipped in salt, or you can use a soft-bristled toothbrush to apply a toothpaste with a whitening function, and turpentine is also very useful at this time. For limescale, the products used to clean the toilet bowl on weekdays are very useful, and if you don't like the pungent smell, you can also use lemon and white vinegar This is a more natural method. Do not use detergents with a fading function, especially if the bathtub at home is colored.

To combat mold and fungal disease-causing bacteria, rinse with bleach and peroxide and wipe dry immediately. 3. Repair the scars in time, install the bathtub and do not move it without permission, if you need to move the position, you must contact professionals. Do not hit or hit the surface with a hard object, causing bruises or scratches.

If you need to repair the dull or scratched part of the acrylic bathtub, you can use a clean rag mixed with a colorless automatic sanding solution to wipe it vigorously, and then apply a layer of colorless protective wax. Do not wax the landing area to prevent slipping. 4. Deal with pipeline blockage at any time and disinfect the pipeline on time to clean once or twice a week to remove the smell and prevent bacterial breeding.

You can use a product specially designed to clean the sewer, pour it into the sewer, and wash it after 5 minutes, being careful not to use it in a metal pipe. If the bathtub is clogged, you can close the drain valve first, and then put an appropriate amount of tap water in the bathtub; Place a rubber suction device (for unclogging the toilet) on the drain valve; While opening the drain valve, stuff the overflow hole of the basin or bathtub; Then quickly suck up and down to suck out dirt or hair and remove it in time.

When we clean such products, we can add a special cleaning agent to the water, let it soak for a while to give full play to the role of the detergent, and then drain the water, and then rinse the surface of the bathtub with water. Usually we can wipe the surface of the bathtub with boiling water regularly, and do not use disinfectant water casually, because disinfectant water does not necessarily kill mold and fungus, etc. For its surface, we can use a discarded soft-bristled toothbrush dipped in bleach powder to scrub the surface, which will not only remove stains, but also eliminate mold.

1. Clean the bathtub regularly, and the bathtub system should be flushed more than twice a month. 2. Deal with pipeline blockage at any time and disinfect it on time, and clean the pipeline once or twice a week to remove the smell and prevent bacterial breeding. 3. Use a sponge or flannel cloth to clean the acrylic bathtub with a soft cloth, do not use a coarse cloth, scouring cloth, do not use any cleaning agent containing granular objects, and it is best to avoid direct sunlight and contact with high-temperature cigarette butts.

4. Cleaning precautions from top to bottom, wipe the bathtub around first, then wipe the inside of the bathtub, wring out the water and add detergent to wipe when wiping, remember that the detergent can not be used for abrasion and high alkaline cleaning products and dark detergents, because it is easy to cause the pigment to penetrate deep into the cylinder surface, wipe the water traces with a dry rag after wiping, do not leave items and the bathtub, they will make the bathtub rust and stain the surface.

1.Wipe down the tub with old newspaper to remove stale dirt.

2.The enamel bathtub can be gently wiped with a clean cloth or brush dipped in some laundry detergent, and then rinsed with water, do not use sand or ashes to stare at the grinding.

3.Putting the soap in the bathroom on the sponge not only does the soap not soften easily, but the soap stored on the sponge can also be used to scrub the washbasin and bathtub.

Bathtub maintenance tips 1.

For the cleaning of the bathtub is very inevitable, in addition to the simple cleaning of the bathtub after each bath, the bathtub should be cleaned once a week, in the cleaning process, do not use steel wool or coarse cloth to wipe the bathtub, if you encounter more stubborn stains, you can use a special cleaning agent and then wipe with a sponge, know that the stain is removed after rinsing with water.

Bathtub maintenance tips two.

Many friends will directly release the bathtub water after bathing, in fact, this practice is not correct, you can leave the water in the bathtub, or re-inject warm water to the highest nozzle more than two inches, and then put in an appropriate amount of low-foaming dish soap and a small amount of bleach to soak for about ten minutes, put out the water in the bathtub, and then rinse with clean water.