-
Immediately after booting, press f8 to do not move to the advanced option to appear in the hand, select "the latest correct configuration" enter to repair, not yet press f8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also a crash, it is recommended to overhaul it, if you can enter the safe mode, uninstall all the inappropriate things before the accident).
First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.
If there is a hardware, take out the motherboard battery and put it on the charge, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.
Use the system that comes with the system restore method:
The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next to restore (win7 restore the system, in the control panel then the device and security sub-option and then the backup and restore sub-option).
-
vivo x3 made an error when flashing the phone in the morning, and after restarting, it was stuck on the boot screen, that is, the screen showing the word vivo could not be entered. I have tried the double clear method, but after powering off, press and hold the volume key (up) down button + power button and it still doesn't work. How can this problem be solved?
Try to use the line brush treasure flashing tool to solve this problem, without any complicated operation, follow the client operation prompts, connect the mobile phone to achieve flashing! Problems such as mobile phone system upgrades, downgrades, system failures, mobile phone black screens, and system streamlining can be solved.
-
Summary. Taking vivox60 and android10 as examples, the specific operation methods are as follows:
1. Press and hold the power button of the mobile phone for about 10 seconds to force the shutdown, and then press and hold the power button and the volume up button at the same time after shutting down, wait for 3 to 4 seconds, release the button after the vivo mobile phone logo appears, at this time it will enter the recovery mode of the mobile phone, press the volume down button to select the clear all data option in the interface, and finally press the power button of the mobile phone to confirm.
2. Press and hold the power button of the phone to force it to shut down, press and hold the power button and the volume button to enter recovery mode, select the system repair option in the interface, wait for a period of time, and then press the power button again to turn it on.
The vivo phone is stuck on the boot screen.
Hello, I have seen your problem, and I am inquiring about the relevant information for you, please wait.
Take vivox60, android10 as an example, the specific operation method is as follows: 1. Press and hold the power button of the mobile phone for about 10 seconds to force the shutdown, and then press and hold the power button and the volume up button at the same time after shutting down, wait for 3 to 4 seconds, release the button after the vivo mobile phone logo appears, at this time it will enter the recovery mode of the mobile phone Lu Xian chain, press the volume down button to select the clear all data option in the interface, and finally press the power button of the mobile phone to confirm. 2. Press and hold the power button of the mobile phone to force it to shut down, press and hold the power button and the volume button to enter the recovery mode, select the system repair and loss option in the interface, wait for a period of time, and then press the power button again to turn it on.
3. Search for the official ** of vivo mobile phone on the Internet**, and then find the service option in **, click on it and select the outlets in the interface to query, and then enter the location of the coarse celery belt in the box to enter the rock reed line to query, so that you can find the address of the vivo mobile phone after-sales service center near the belt. In addition, if you keep the mobile phone manual when you buy the first crack of the mobile phone, you can also find the location of the after-sales service center in each city on it. It should be noted that this answer applies to most models of vivo phones.
-
1. Press and hold the power button for 10 seconds to force restart the phone;
2. Press and hold the volume up button and the power button at the same time for 3 to 4 seconds when the phone turns off the phone and the vivo phone logo, release the button to enter the recovery mode, first select wipe data factory reset to enter the option yes--delete all user data, and then select reboot system now to restart the phone.
This operation will lose all the data on the phone, so you can back up the phone data before this operation, including contacts, ** and the like. )
Since the later model is Chinese Recovery, the operation steps of Chinese Recovery Double Clear are: press and hold the power button and the volume up button at the same time in the shutdown state, until the word vivo appears and then release, the phone automatically enters the recovery mode, and then select Clear Data - Clear All Data;
This operation will lose all the data on the phone, so you can back up the phone data before this operation, including contacts, ** and the like. )
If you still can't operate, you can go to the local after-sales service center for testing and processing, and the address of the after-sales service center can enter the homepage of the vivo official website - service - outlet inquiry - inquiry.
Dear Lenovo users, hello!
We apologize for any inconvenience caused. If your device fails to boot normally and enter the system, it is recommended that you first force the power button to shut down by pressing and holding the power button for 10 seconds before trying to reboot it. >>>More
win10 stuck in the boot interface that is the system has a problem,If you wait a long time to enter,Cancel some boot startup items,If you can't get in, only reinstall the system,Or try to boot and press f8 to see if you can enter the safe mode,Or restore the last configuration mode。 >>>More
If the mobile phone cannot enter the system page after booting up, and the screen is stuck or frozen, it is recommended that: 1Press and hold the power button for 8-10 seconds to restart the machine. >>>More
The phone can't be turned on: it has been left in the boot interface without change, and you can't enter the system, only a vivo logo is displayed, or you can use your own memory card to swipe to restore your own system. >>>More
Is it a desktop? Cut off the power you put it for a while and check the wiring connection. I had this kind of problem in my previous machine, and I can restart it back, you try it first. >>>More