How to treat cracks? How to deal with cracks in the exterior wall?

There is often **dryness in front of the lower leg shins, like snake skin, in fact, this is ichthyosis vulgaris, many people have this kind of problem, and other places are better, but it is dry calves, like snake skin, there is a saying called snakeskin sores, but it is actually a kind of ichthyosis vulgaris, sometimes it is related to genetics, so there is no way to completely **, but there is no need to worry, and it does not affect life too much, as long as it is fully moisturized and fully moisturized. After taking a bath in winter, when there is still a certain amount of water content, you can use a good emollient to relieve the symptoms.

If the symptoms are more severe, emollients should also be used in the summer, so it is actually very simple, using a good enough emollient can solve the problem. Of course, it has to be used continuously, and it may be resumed as soon as it is stopped. Dryness is not only not good-looking, it will not only peel but also cause itching, and in severe cases, it will also cause dry eczema, that is, fat-deficient eczema, so it is necessary to treat the symptoms at ordinary times to prevent the occurrence of other diseases.

1.The cracks on the calves are caused by too dryness, you can rub the body lotion in time after bathing, and you can also use aloe vera gel to apply to the surface.

2.As the name suggests, body lotion is a cosmetic lotion used on the body, which has the effect of hydrating, whitening, and moisturizing the whole body.

3.If your skin feels slightly tight after bathing, or if you scratch your fingernails with white marks and occasionally itch in winter, it is recommended to choose a body lotion rich in glycerin and other oily ingredients that lock in moisture in the skin.

1. The cement mortar can be used to get the cement mortar into the cracked wall, and then the pilasters or steel materials can be used to fix them. 2. If the problem of cracking of the outer wall is more serious, then it is necessary to chisel the cracked place of the wall into a U-shaped groove, and the groove distance should not be less than 20 cm. When the base is excavated, it is necessary to chisel the hairs, and then hang the steel wire mesh.

Then the surface of the exterior wall is thoroughly and comprehensively cleaned, and the anti-cracking materials are paved after cleaning, so that the quality of the later construction can be guaranteed. The reasons for this situation: 1. If the base layer of the exterior wall coating finish is the cement mortar plastering layer, then the dry shrinkage and temperature difference shrinkage will occur in the coagulation process, and if the exterior wall plastering construction operation is not standardized, it is easy to lead to hollowing and cracking.

After a long time of wind and sun, the internal cracks will become larger and larger, and finally cracks will be formed. 2. When the exterior wall putty we use is of poor quality, poor crack resistance, or improper construction operation, the scraped putty will dry up and crack after being put on the wall, which will affect the paint surface layer. 3. It may be the cracking of the coating surface layer.

Some coatings with quality problems will shrink and crack or other quality problems soon after being painted on the wall because of their poor crack resistance or because of improper construction.

**Cracks are due to dry weather,**lack of moisture, you can use a nourishing and moisturizing shower gel when taking a bath, and then apply lotion often to.**

I have it too, I don't know how it came about, I just didn't care about it.

1.temperature cracks.

Many self-built houses belong to the brick structure, the floor and the brick form a binding force on each other, as long as there is a binding force, the outdoor temperature is easily affected, so it is easy to have the problem of incoordination, so that the brick body is easy to appear temperature force. In this case, it is necessary to apply a non-woven fabric or mesh cloth to the cracked area, and then repair the paint.

2.Cracks in the paint.

If there is only a crack on the surface of the paint, it is relatively simple to deal with it, just use sandpaper to polish the crack first, clean the gap, and then use paint to repaint.

3.Structural cracks.

If there is a problem with the internal structure of the wall and the bricks, it is easy to form cracks in the wall, that is, in the surface of the paint. If this kind of situation occurs, it is necessary to find local professional construction personnel to come to check, and according to the corresponding situation, to carry out targeted treatment.

4.Cracks in the mud layer.

Cracks in the mud layer are often caused by construction problems, and the matching ratio of cement mortar is not coordinated, resulting in the cracking of the cement layer when painting. In such a situation, it is necessary to completely remove the putty of the wall, carry out anti-cracking treatment at the crack of the cement layer, pave the carbon fiber anti-crack cloth, and finally carry out post-construction treatment.

5.The house is sinking.

For many houses that have been built for a long time, it is easy for the ground to subside, resulting in cracking of the wall, and the location of the occurrence is often the junction of the floor slab. It is necessary to clean the construction base layer first, carry out anti-crack treatment in the paving kraft paper or mesh cloth, and finally carry out the construction of latex paint.

6.Putty cracks.

If the putty cracks the problem, you need to clean the putty on the wall first, directly carry out anti-cracking treatment on the surface of the putty, pave the glass fiber mesh, and then re-scrape the putty to effectively avoid the crack problem.