What does Logical ID mean and what does Logical ID refer to?

The logical ID is used to register the modem.

The optical modem needs to enter a logical ID number during registration to be used normally.

Configure the logical ID and password, which is assigned by the telecom to uniquely identify the ONU device.

things, don't change it, the password is also very important, don't change it. This data is entered by the installer when he goes to the home for installation and is registered at the terminal.

If you configure a voice (**) service, the configuration information is different for each person.

To configure a broadband connection, remember the original VLAN ID before configuring this, and then create a new WAN connection with its own VLAN ID. After this is matched, the modem can automatically dial up the Internet.

You can also have multiple computers at home to access the Internet, and you don't need to create a new broadband connection on the computer to dial up.

Wireless configuration, the basic settings are relatively simple, first select the wireless switch to turn on, and the rest remains unchanged.

To configure IPTV, the main thing is the VLAN value, as well as the binding port 2 and SSID2.

The basic configuration of Broadband**, where the username is used.

The password is also the only number that identifies the home.

1. In many routing protocols, different routers need to be distinguished, and then a label is needed to identify the router, which is the logical ID of the router;

2. Generally, the logical ID of the router is named with a string in IPv4 address format;

3. Generally, the IP address of loopback0 of the loopback interface of the router is used, and if there is none, the largest physical interface address is used as the logical ID of the router. In an IPv6 environment, the logical ID of the router must be configured using the routerid command

The logical ID is the name of the wireless signal searched by the mobile phone, also known as the SSID. The password is the password of the router.

Set Logical ID and Password:

1. First, enter the address bar of the browser web page according to the IP address of the router, and click enter.

2. Open the login interface of the router and enter the original password to log in.

3. After entering, if the router is a wireless router, click "Wireless Settings".

4. Open the settings interface, change the wireless name to the desired name, and change the password to the new password to complete the logical ID and password change.

Brand model: Hikvision router.

System: WR-C21

The logical ID is the identification code used to register the modem, and the modem needs to enter the logical ID number during registration. The logical ID is assigned by the operator and cannot be changed privately, and once changed, it will not be able to be used normally. It is done by broadband installation or by maintenance personnel who assign and test it at the time of installation or repair.

To set the logical ID and password, first enter the address bar of the browser web page according to the IP address of the router, and click Enter. Open the login screen of the router and enter the original password to log in. Once inside, if the router is a wireless router, then tap on "Wireless Settings".

Open the settings interface, change the wireless name to the desired name, and change the password to a new password to complete the change of the ID and password of the Logos manuscript.

Dear users, hello!

According to your description. ID is the abbreviation of English identity, ID is the meaning of identity identification number, called a serial number, account number, is a code, and is unique. Equivalent to ID card, in a specific thing, its ID number is unchanged, as for what to use to identify the thing, determined by the rules formulated by the designer, this rule has a certain subjectivity, such as employee number, ID number, computer **, port number and so on.

For computers, there are two types of operations, logical operations and arithmetic operations, and for logical operations, it is the id function of numbers. Of course, ID, in life, it is actually very common to ID, for example, you paste the model number and production number of the product on the same kind of things to distinguish them, this is also called ID.

ID is an ID card to put it bluntly. But in the online world, there is something else! The ID in the network is also equivalent to our ID card, and there is a popular saying "" or "nickname". Here's an example:

In the process of adding friends, you must be asked for an ID, so the ID here refers to your and nickname.

Once you know your ID, you can add you as a friend.

If you want to verify and activate your Samsung account, please do the following: After registering a Samsung account, please log in to the email address you filled in during registration - find the email with the verification code of your Samsung account - click Verify Activation.

If you do not receive the verification information in your email address after registering a Samsung account, we recommend that you do the following:

1. Please make sure that the email address you filled in when you registered your Samsung account is correct.

2. Log in to the email address you filled in during registration, check your spam mailbox, and check whether the verification email is blocked.

3. If you still can't find the email to activate your Samsung account, please try to send it again

Log in to Samsung's official website - Log in Register - Enter your email address and password - Indicate that it has not been activated - Click "Check Verification Email" or "Resend", and then log in to your email address to verify the information.

4. Please resend the attempt in a different time period.

6. Backup data (contacts, text messages, **, etc.), factory reset (Settings - Reset Privacy - Factory Reset) attempt.

If the problem persists, it is recommended that you bring your tablet, purchase invoice, and repair card to your local Samsung after-sales service center for testing.

ID is the account number when you log in to the post bar,