X3650M3 how to install the operating system

Designed for virtualization, the x3650 m3 is designed to deliver leading-edge virtualization capabilities Support for industry-leading virtualization solutions, VMware ESXi embedded hypervisors. In addition, x3650 m3 delivers exceptional memory capacity per core, allowing you to virtualize more efficiently and cost-effectively.

The x3650 m3 is part of IBM's easyJet Advantage portfolio, which is designed with the needs of mid-sized businesses in mind. EasyJet model configurations that are easy to manage may vary by country and region.

IBM System X3650 M3 combines powerful, proven technology with a flexible, energy-efficient and intelligent design. A powerful 2U server delivers quad-core compute with Intel Xeon 5500 series processors with QuickPath InterConnect technology, delivering a significant increase in performance-per-watt over previous generations by integrating low-power components in an energy-efficient, intelligent thermal design.

If your server is brand new hard drive, then you can skip this step, otherwise, please back up all the data on your server hard drive, because the whole installation process is equivalent to repartitioning the hard drive!! Always remember to back up all your stuff!!

Find out the IBM installation CD.

The installation of a server is basically the same as that of a PC, but it is the same. We installed the server as if it were new. That is to say, regardless of the data in the hard drive, if there is other data in your hard drive, please back up it yourself.

The server is automatically switched from the disc to start and perform read-ahead data processing.

The disc bootloader is just in the middle of the graphical interface. We can see the IBM installation cover.

You can use the official boot disk,Directly guide you to install the system,Or directly install it with the system CD,Load the driver when the time comes,I have windowsserver2008 image and boot disk image,Can identify the hard disk,If you need to, you can send you a copy。

1. Use the U Boot U disk startup disk maker to make a boot U disk;

3. Set the BIOS to boot from the U disk, and put the previous image into the U disk;

4. After the U disk starts, select the item with a similar meaning of "ghost manual installation" on the boot interface, and select the installation source as the system you put in the U disk after entering, and the installation path is your C disk. Or select PE in the interface,And then there is a one-click installation software in PE (just on the desktop),Select the image you put in U,Install it in your C disk。 A progress window will appear, and you will restart when you are done.

5. Remove the USB flash drive after restarting, and then the machine will be automatically installed by itself, just click "Next" or "OK" until the installation is completed.

The specific installation steps are as follows:

U disk system, you need to make the U disk into a boot disk first, and then only blind the process from the online ** system, and after decompression, copy the system with GHO to the boot disk that has been done U disk.

1.The installation system can go to the latest system 114 network.

2.After watching the tutorial on how to make a USB flash drive, you will use the tray system. Go to the computer store and learn how to install the system.

It is suitable for those who have a good understanding of the BIOS settings of the computer. [Find and enter the option containing the word "BIOS" in the BIOS interface, 1.]“advanced bios features”

3.After going to "Advanced BIOS Features", find the first boot device option with "first", "First boot device".

4."First Boot Device" option, select "U disk" to press enter, after the configuration is set, press the "F10" key on the keyboard to save and exit, and then the computer will restart by itself, and the rest is to automatically search and install the system.

Above are the steps to set up the BIOS boot. The BIOS settings are different for each computer, so you can refer to them. Once you have learned it, you will be able to use the USB flash drive system.

Bullshit doesn't make sense This is the pants first server First of all, it depends on how many hard disks you have What raid mode do you need to install the system first of all, you must go to the official website** The corresponding model of the guide file is engraved to the disc or make the disc mode to the U disk After installing the boot file, put the system disc of iOS Note that the gho cannot be used After the restart, just install it normally.

Flash drive. Here's how:

The installation system can go to the 114 network.

The Ghost XP SP3 operating system, and there is a detailed ** version installation tutorial on it, which can be used as a reference when installing the system.

After reading the tutorial of USB flash drive production, you will use the tray system. In the BIOS interface, find and enter the option containing the word "BIOS";

After going to "Advanced BIOS Features", find the first boot device option with "first", "First boot device".

First Boot Device" is selected, select "U disk" to enter, after the configuration is set, press the "F10" big macro key on the keyboard to save and exit, and then the computer will restart by itself, and the rest is to install the system automatically.

How to boot a computer from a USB flash drive:

Press the shortcut key. Select USB flash drive to boot;

Set the BIOS to boot from the USB flash drive.

What system to install is generally to do a good job of the array, and it is installed directly, or it is installed with a boot disk, and Red Hat's array is installed directly without a boot disk.

1- Click on the first "Server Manager" of the grid menu;

2 - Under the Quick Launch (Q) submenu, click 2 Add Roles and Features;

3- Click "Installation Type" on the left, then click "Role-based or feature-based installation", and then click "Next (n)".

4- Click "Select Server from Server Pool" first, and then click "Computer Name of Local Server", this IP is only locally available, so click "Next (N)" directly;

5- Find "Web Server (IIS)" in the list of roles here, click to check it;

6- Pop up the subdialog "Add Role and Function Wizard", click "Add Function" directly;

7- Click "Functions" on the left and tick "" in the middlenet framewore ；

8- Click "Role Server" on the left, and select the items that need to be installed from the middle role service list (if you don't know which ones you need to choose, it is recommended that you check all of them [except FTP server]);

9- Confirm the selected installation components before installation, and then click "Install (i)";

10-Windows 2012 Server is now installed. Wait patiently for dozens of seconds;

11- The installation is successful, we click "Close" to end the installation;

12-Check Windows 2012 Server installation and running results: Open the Internet Explprer10 browser, enter the local public IP, or the local private IP, or localhost, and see the interface is displayed!

13- Open the "Internet Information Services 8" manager, and you can freely view the various setting options. So far, the installation has been a complete success. Start your Windows 2012 Server journey.

The precautions and installation steps required for installing the system on a computer USB flash drive are as follows:

Step 1: Prepare a USB flash drive for software and hardware before production (it is recommended to use a USB flash drive of more than 8G) Step 4: Enter the BIOS to set the boot sequence of the USB flash drive, and press the shortcut keys such as del or F2 to enter the BIOS to set up the boot USB flash drive.

Step 5: After entering the PE, use the USB flash drive to start the quick installation system.

IBM Server System Installation**.

Unlike IBM servers, you need a boot disk to boot before you can install the system, and in the process of booting, you will be asked to choose what system you want to install.