Why is the scale line used in CAD smaller than before?

I think it's very difficult to use the zoom method entirely! Because the accuracy is to reach the point of perfect engagement, the scale factor is difficult to calculate, and you can only use the reference command in scaling, and the scale factor cannot be used here at all, and can only be scaled dynamically.

First of all, draw these circles, he has given the known conditions, the circle of r50, three circles arranged according to the regular trilateral, as shown in Figure 1, and then copy this figure and then rotate 60 degrees, according to the scale of the trilateral, and then get Figure 02, and then reduce Figure 2 to the triangle-like figure composed of three circles in the middle of Figure 1, remember to determine the center point, to be used when scaling, remember to enter the command to select the object when scaling, after selecting OK, then select the center point, do not lose the scale factor after selection, To enter the letter "r", then select the center point, and the second point you can select the vertex on the outermost circle, and slowly drag it until it is tangent to the big arc.

My experience is that the smaller the ratio, say 1

The less clear the line type is.

The larger the scale, the clearer the line type will be.

The reason is that the larger the scale of the map, the less things can be displayed on the surface, so that the broken line can be clearly seen.

The smaller the scale, the more things are displayed on a surface, and the line type is not so clear.

Here's how:

1. Open the required CAD drawing file, and find the drawing object that needs to be scaled in the area;

2. Select the graphic object to be scaled, click the drop-down button on the right side of the "Scale" tool in the "Tool" menu option, and select "Absolute Scale" or "Relative Scale".

3. Then click to select a zoom point in the diagram, or enter the x and y coordinate positions of the zoom point;

4. Absolute proportional scaling: Just enter the scaling value 2 in the length column, and then press the Enter key, and the graph (side length, diameter) will be enlarged by 2 times.

1.Open the finished CAD drawing, select All (including labels), and zoom in as shown below.

2.Keep in mind the scale factor copy, which is a CAD chart that is only half the size, and you will notice that the label is twice the size.

3.Then open the annotation style, click the corresponding annotation style, and click Modify, as shown below.

4.Go to the "Main Unit" column and modify the "Scale Factor" under the "Unit Scale".

5.Change the default scale factor "1" to the reciprocal of the previous scale factor, and enter 1 in the graph, that is, enter "2". Then click OK as shown below.

6.You will then find that your ZD map has been scaled to the size you want, but the size of its annotations has returned to its original size. This solves the problem of reducing graphics and keeping label sizes the same in CAD.

Preparation tools Materials: A computer with Windows 10, ZWCAD software.

Here's how scaling works in CAD:

1. Open computer-aided design, and the following figure shows the graphics in computer-aided design. The size of the painting is comparatively smaller.

2. By scrolling the middle scroll wheel of the mouse, you can zoom in and view the graph.

3. If you want to multiply the actual size of the shape, please drag ** to select them all.

4. Then in the command input box below, type SC and press Enter.

5. In the specified scale factor input box at the back of the graph, enter the number of times you want to zoom in, and enter any number of times as needed.

6. In this way, the size of the graph will be enlarged according to the input multiple and the proportional column of the whole graph. The original size of the boundary line in the image below is 8, and after five inputs, the value will be approximately equal to 40.

Material Tools: CAD

1. Open a CAD drawing that needs to be scaled and enter the CAD drawing operation interface.

2. Click the "Zoom" button on the "Modify" menu bar on the right, that is, the icon of two sizes of squares together, or click "Modify" on the upper menu bar, and then click "Zoom".

3. Scale, the scale "scale" command appears in the command bar, ask to specify the object, and click the object to be scaled.

4. After clicking, find the zoomed object, and display "Found object".

5. It is required to specify the base point, and at this time, the "base point" that needs to be scaled is to be scaled based on that point. Generally speaking, it is better to choose the corners of the shape. Click on this base point.

6. After specifying the base point, you are required to enter the scale of the graph, here according to your preference, enter the scale ratio.

7. Here I want to reduce it, now the proportion, after entering in the command bar, click the "Enter key", if you want to enlarge, enter a number greater than 1 to achieve enlargement.

1.Type re, press enter, scroll the mouse wheel, and you will find that the graph can continue to zoom in and out.

2.Continue to zoom in and out, and then spine to a certain point will indicate that you can't zoom out or zoom further.

or the dxf file holds the drawing data.

4.Generates data several times the size of the current view, and the circles and arcs in the diagram determine which polygons to use for display based on the size of the display.

The number of sides, the text is reduced to a certain extent, and it will be simplified to display as a box.

5.In this state, enter re, regenerate, and generate the display data in the current view. Scroll the wheel up until you can clearly see the circle turn into a polygon. Shirt Debate.

Do you want to reduce the interface of the code-based map, or do you want to reduce the scale? The view interface zooms out with the zoom command. Scale down with the scale command, then delay the cover to bury the figure you want to shrink and enter the scale down. Hope.

1. The methods of CAD scale adjustment are: use the "proportional scale" command; Use the Zoom In command; Use the Stretch command; Use the Copy Scale command.

2. The method of scaling in CAD is as follows: open computer-aided design, and the following figure shows the graphics in computer-aided design. The size of the painting is comparatively smaller. By scrolling the middle scroll wheel of the mouse, you can zoom in and view the graph.

3. Enter the shortcut commandEnter the scaling shortcut command sc on the command line, and press the keyboard enter key or spacebar to start the scaling command. Select the element to move the mouse to select the entity to be scaled on the sheet, press the enter key or the spacebar to enter the next step.

4. The method of CAD adjusting the scale of drawings is slow: generally use the scale (scale, abbreviated as SC) command to set the scale. Here you can either draw first and then scale, or scale first in the drawing.

Here is an example of a rectangle with a length of 600mm and a width of 200mm per acre. Here, the method of drawing first and then zooming is used.

5. Open the required CAD drawing file, and find the drawing object that needs to be scaled in the area. Select the graphic object you want to scale, and in the Tools menu options, click the drop-down button to the right of the Scale tool, and choose Absolute Scale or Relative Scale.

Hello dear, there may be several reasons why the CAD input scaling cannot be scaled:1Keyboard input error:

You may have entered the wrong zoom. Please confirm that you have entered the scale of the shed correctly. 2.

Keypad locked: If your keypad is locked on a numeric keypad, you may be experiencing issues with input scaling not scaling. Please check that your keypad is locked to the numeric keypad.

3.CAD software issues: If there is a problem with your CAD software, you may not be able to scale objects using input scaling.

Mountain and hunger, please try restarting the CAD software and try to enter the zoom again. 4.Objects that are too small or too large:

If the object you want to scale is too small or too large, you may not be able to scale the object using the input scaling. Try a different scaling method.

1. Double-click the CAD shortcut icon to open the CAD drawing interface;

2. Take the regular pentagon as an example, click the regular polygon button on the left;

3. After drawing, the pentagonal figure is obtained;

4. Dimension the graphics for easy and intuitive comparison;

5. Select the image and enter the sc command on the command line, and press the keyboard enter button;

6. Then the command line will prompt you to specify the base point, and click the point specified by the pentagon with the left mouse button;

7. Then the command line prompts you to enter the scale factor or parameters to zoom in.