Why can t I find the IP address of the tablet of Taipower? 5

I've also encountered it, refresh and try.

Dear Taipower users, hello:

1. It is recommended to reset the WiFi settings and change the settings to dynamic IP; automatic dialing; The channel is changed to 11 or more.

Under. 2. The tablet does not need to be set up, if you have set it, please restore the factory settings, (take the Android system as an example) Settings - Backup and Reset - Factory Reset - Reset the Tablet - Clear all content.

3. Turn on the wifi and connect to the network to access the Internet.

Tips: 1. Router precautions, SSID cannot be Chinese, turn on wireless function and allow SSID broadcasting. 2. If the tablet shows that it is connected but cannot access the Internet, this fault is usually caused by the router turning off DHCP and unable to automatically obtain the IP

As a result, you can enter the router and turn on the DHCP function.

It seems that the network parameters are incorrect and the network card cannot be started, you try to manually set the network parameters by clicking Advanced Configuration (you can refer to the IP address setting of the desktop Internet access) and then try again.

ipconfig /all

After entering, you can view the IP parameters of the local network card of the desktop, just follow its settings, it should be noted that the IP address in paragraph 4 must be different, for example, the IP address of the desktop is set to outside, not a number of 1, and does not conflict with other Internet devices).

The hardware connection is not right You look at the "Advanced" tab in the advanced diagram, where can you do IP address?

Click on the name of the wifi access point you need to connect to.

3. After entering the password, hide the input method and you will find "Show Secret Code" and "Show Advanced Options".

4. Check - Show advanced options.

5. Pull down and there will be a difference in "IP settings".

6. Change the DHCP in the option to --static.

7. After changing to static, there will continue to be several items below, and the way to fill in is as follows:

IP address: The IP address of your tablet can generally be between 1 and 255, and cannot be set to the same IP address as any device under the router). It is important to emphasize here that the default IP address is displayed, but it is grayed out, even if it is the same as the one you want to set, you need to re-enter it yourself.

Network prefix length: Modify the network prefix length to be the same as the default.

Domain name 2: The same as domain name 1 is fine.

Note: In fact, you have to enter each item yourself, otherwise, the connect button will be grayed out and cannot be clicked.

I'm using Taipower's P76a My signal often appears when the signal is a grid I've been saying to get Two minutes have passed and said I can't connect It's not in the area You see if it's a problem with the signal The wifi of the domestic machine is generally Maybe I'm afraid of power consumption The wifi power is reduced.

Wireless cats are not connected and require a wireless router.

Wifi:

1. Wifi Internet access needs to have a wireless router, and then set it to dynamic IP; automatic dialing; The channel is changed to 11 or less.

2. The tablet does not need to be set up, if you have set it, please restore the factory settings, (take the Android system as an example) settings - backup and re.

Set -- Factory reset -- Reset tablet -- Erase everything. 3. After turning on the wifi to connect to the network, you can go online, if you are connected but can't access the Internet, it is recommended to change the channel, and then restart the router to try again.

You can change the channel of the route, and the browser - wireless settings - channel can be modified to 1 or 10!! You can ask questions.

Change the signal source, sometimes in some wifi hotspots it is really not possible to access the network. Try a different wifi hotspot.

Taipower is too much garbage, and it is not as good as a copycat mobile phone of a few hundred yuan.

Install a ** server software on the computer that is the server, such as: ccproxy, there are many on the Internet, find it yourself, and then set the IP of other computers correctly, such as all set, mask, the gateway can be set to the IP of the PC of the server).

Then set up ccproxy on the server side, the ccproxy help file has a detailed description, see for yourself.

If you are an XP system, you can use the built-in sharing.

Right-click on the local connection and change the IP to .

You do not need to enter the subnet gateway DNS.

Then right-click on the broadband connection, there is sharing in the advanced, and the tick is OK.

Other machines set the IP to the same network segment, gateway.

DNS is filled in locally, such as the DNS in Hunan

You've made it the easiest way to access it, just enter the IP address of the server.