How to set the TV to PC mode, how to turn the TV back to computer mode

Take a Lenovo G400 notebook connected to Skyworth KKTV TV as an example,The specific operation steps are as follows:

Materials need to be prepared: HDMI cable.

1. First of all, you need to plug one end of the HDMI cable into the HDMI port on the side of the computer.

This is shown in the figure below.

2、Next,At this time, you need to insert one end of the HDMI cable into the HDMI1 interface on the back of the TV,As shown in the figure below。

3、Then,Turn on Skyworth TV,Take out the TV remote control,Press the remote control"Signal cable"button,Then you can select"HDMI1",As shown in the figure below。

4. Next, you need to open the computer desktop, right-click on the empty area of the desktop, and select the screen resolution.

This is shown in the figure below.

5. Finally, set the Multi Display to copy these displays, and SkyworthTV will display the contents of the computer desktop, as shown in the figure below.

Hello:Different TV brands Different models Different setting methods Just select the TV signal source on VGA or computer mode At this time, it is PC mode how to switch the TV signal See if there is a signal source or source or switch or related vocabulary button on your remote control Press this button The TV will display the corresponding signal source item Move to VGA (computer) item Confirm it If there is no such button, press the remote control menu key to try Select the relevant submenu of the approximate signal input vocabulary After entering, select the VGA (computer) inside, and after confirmation, the current signal of the TV is the PC state.

Dear,Hello yo,This question will be answered by the bureau for you,The solution to adjust the TV to computer mode is as follows:The TV is currently in computer mode; You can point the remote return car controller at the TV, and press the signal source key or input selection key on the following remote control to bring up the signal source menu options of the TV. In the signal source menu of the TV, select the leak hidden item, find the TV mode, press the channel + or channel- button of the remote control to move the cursor, select the TV mode, press the confirm button, and the signal source of the TV can be changed.

That's all I have for you, I hope it helps you <>

Solution. 1.First of all, you need to have a TV that supports HDMI input and a computer with a graphics card with HDMI output, if the computer does not have HDMI output, DVI output is also OK, but you need to use a DVI to HDMI adapter.

2.Then you need an HDMI cable of a suitable length, here it is recommended not to use more than 10 meters of HDMI cable, because the bench is transported as a pure HDMI cable (without special circuit enhancement) after more than 10 meters, it is difficult to guarantee that it can continue to support such a high resolution as 1920x1080.

3.Finally, it is wired, only need to plug one end of an HDMI cable into the HDMI output of the computer graphics card, and plug in the HDMI input of the TV at the other end. Turn on the computer and LCD TV, and use the remote control to set the "source" of the LCD TV to "HDMI mode".

After changing to HDMI signal, the TV will display the picture transmitted by the computer, and the sound and image of the computer can be displayed on the TV.

4.If the TV screen is not displayed due to a resolution mismatch, you can set the resolution of the screen on the computer to achieve the best display effect on the TV. Right-click on the desktop of the computer to pop up the menu, and click "Display Settings".

Click "Advanced Display Settings" on the right.

<>5.In the Resolution setting Jujube Beam option, set the monitor to "TV". The computer will then automatically detect and recommend the best resolution, and you can adjust the resolution according to the actual effect of the TV display to achieve the best display effect.

6.Next, set the TV as the default speaker for the lap computer to synchronize the picture and sound. Find the volume icon in the shape of a small speaker in the computer tray, right-click, and click "**Device".

<>7.In the "**" settings, select the TV "ftv", right-click, and select "Set as default device". Click "OK" and the TV will be used as a speaker for your computer.

How to adjust the TV to computer modeHello dear,1、First prepare a VGA cable,Use this Kai hunger chain cable to synchronize the screen display on the computer to the TV。 2. Find the VGA socket on the computer and connect one end of the VGA cable to the VGA socket on the computer. 3. Find the VGA socket on the TV again, and connect the other end of the VGA cable to the TV staring at the sun.

4. Turn on the TV and press the "Source" button on the TV remote control. 5、The TV will display"Source"Menu,Use the remote control to select "VGA" from it and press the "OK" button to confirm,Enter the VGA**Synchronization mode of the TV。 6、After the TV is switched to VGA mode, it can be connected to the computer,Display the picture of the computer。

In order to get a better display effect, it is recommended to adjust the resolution of the computer according to the size of the TV, generally 32-inch TV can adjust the computer resolution to 1280*720 pixels. In addition, because the VGA cable can only transmit the first signal, can not transmit the sound signal, so you can connect the speaker to the computer ** sound, increase the effect of sound. Hope it helps.

Directly click the "New Notification" button in the lower right corner of the taskbar to open the "Action Center" interface, or press the keyboard key combination "Win+A" to quickly open the "Action Center" interface.

After opening the Action Center interface, click the "Tablet Mode" button below to switch the current desktop mode to "Tablet Mode".

In the "Tablet Mode" desktop, you can also use the same method to click the "Tablet Mode" button again in the "Action Center" interface to return to desktop mode.