Lingyue V3 has abnormal noise when driving, what is the reason for Lingzhi M3 abnormal noise when dr

Boss, did you buy it in the Internet? I'll give it to you cheaper...

V3: Yue Ling started to step on the brakes when there was a strange noise. If it's a squeaky sound, there will be a lot of problems, such as calipers, brake discs, brake pads. If the noise persists, first check if there is braking resistance.

Poor caliper reset will cause the brake disc to rub against the brake disc for a long time, and under certain conditions, it will emit abnormal noise. Then check the disc for foreign objects between the disc and the disc.

1.The grinding of new cars, in which the run-in of brake pads is a very important link. Usually, after running a few hundred kilometers, you will feel more comfortable braking.

2.The new brake pads also need to be run in to better combine with the old ones. When you first change it, you will feel that the brakes are very hard, and it usually takes hundreds of kilometers to feel better.

3.In the process of driving in the middle of the vehicle, there may be small sand particles entering the middle of the plate and plate, and sometimes abnormal noise will be produced due to friction. In this case, maintenance is generally not required. Just run and let the little grains of sand fall out. Roll out of the way.

4.If there is abnormal noise because of poor running-in, some car owners simply run over and brake sharply, so that they can drive in the brakes in a short time, but this will make the brake pads more worn, that is, it will reduce the service life of the brake pads. Therefore, it is recommended that you run for a period of time to observe, and do not artificially wear the brake pads.

Millions of car purchase subsidies.

It may be that the four-wheel alignment of the vehicle is inaccurate, and the long-distance driving has a large wear on the tires, and the tires form eccentric wear and make abnormal noises. You can touch the pattern of the tire with your hands, and if you can feel the unevenness of the inner or outer pattern, it must be the reason for the rough noise of the mausoleum. You can consider doing a lower wheel alignment first, and then consider replacing the tires.

The 2018 Lingzhi M5L has abnormal sound in front of the right, what are the problems commonly encountered in the car2018 Lingzhi M5L has abnormal noise in the front right, and what are the problems related to the common problems encountered in the car, so we put forward the problems related to the 2018 Lingzhi M5L in front of the right and the common problems encountered in the car.

Abnormal noise needs to check the shock absorber, brake pads, balance bar, anti-roll bar, steering rod joint, drive shaft, outer ball cage, inner ball cage, bearing. First of all, you can raise the tires with abnormal noise, you can raise a wheel by yourself, or you can go to the repair shop to get on the lift, and after lifting, you can move the wheels from up and down, left and right respectively, and feel whether there is any space. And then the line is to turn the wheel to listen to the bearing if there is any abnormal noise.

Whether the shock is leaking oil. Whether the rubber parts of each component are damaged and leaking. Generally, it is possible to judge the abnormal noise**.

1.It may be that the four-wheel alignment of the vehicle is inaccurate, and the long-distance driving has great wear on the tires, and the tires form eccentric wear and make abnormal noises. You can touch the pattern of the tire with your hands, and if you can feel the unevenness of the inner or outer pattern, it must be the cause of the abnormal noise.

You can consider doing a lower wheel alignment first, and then consider replacing the tires.

2.It is not excluded that it is a resonant sound.

3.If the abnormal noise of the car is not obvious at low speed, and the uniform humming sound is made at high speed, it may be that one of the wheel bearings of the vehicle is damaged. Due to long-term driving, the bearing will be damaged due to fatigue and make abnormal noises due to fatigue under long-term high-speed operation.

Summary. Hello, happy to answer your questions.

Hello, happy to answer your questions.

Southeast Lingyue V3 remote control lock car lock can not unlock the lock normally.

If this situation occurs, it is because the door is not closed properly, you can check whether there is a door on the instrument that is not closed properly, and it is generally caused by poor contact of the door light switch.

There is no no no indication on the meter.

When locking, flash three times and can't lock it.

You try to close the car door again.

No, I tried it too.

That is, there is a problem with the lock block of the main driver.

Before dusk. Regarding the question you asked, the car with sunroof of Southeast V3 Lingyue should be sold stupidly, it should be the style version. The engine compression ratio of this car is:

1. When you are in normal use, it is recommended that you can try to change around 2200-2300 rpm when you change 1st gear to 2nd gear, and shift gears at 2600-2800 rpm when other gears. Because if the speed is too low, it feels that the engine power is insufficient, pay attention to the engine at low speed is too loaded, there is damage to the engine, it will be easy to form carbon deposits, and it is easy to call the rod; If it is higher than the above speed, then because the engine speed is higher, the vehicle speed is lower, when the clutch plate is in contact with the pressure plate and the flywheel, it will cause a similar effect of engine braking, that is, the vehicle speed decreases or is called the car, which will accelerate the wear of the clutch parts. It can be shifted between 3000-3500 rpm during hard acceleration).

After more than 3500 rpm, it is not very meaningful to speed up, and fuel consumption will increase a lot. If it is on an uphill road or when the vehicle is heavily loaded, the speed of each gear shift should be increased by 300-500 rpm.