What to do if the scale of the shower head is blocked, and how to clean the scale of the bathroom sh

If the shower head is used for a long time, the amount of water will become smaller, which does not mean that the shower head is broken, which is a natural phenomenon. Because the water quality is not good, the water contains a lot of alkali, and the scale is deposited at the outlet hole, resulting in the blockage of the shower.

How to clean the shower head.

Due to the different styles and structures of the shower, some can be disassembled, some can not be disassembled, how to disassemble should be analyzed according to the actual situation. Of course, it would be best if it could be disassembled, and it would be easier to clean. Here are a few ways to clean it:

1. Soak with weak acid.

After removing the shower, put it into a small basin filled with white vinegar (oxalic acid, cleansing spirit) and soak it for about two hours, brush it with a toothbrush after soaking, and then wash it with water; If there is hard water sediment, scrub with lemon slices.

2. Use a toothpick or needle prick.

If the shower head is severely blocked, you can use a toothpick or a thin needle to poke the small holes that do not produce water until there are no impurities in the holes. After stabbing, you can soak it with weak acid, so that you can dredge the nozzle well.

Cleaning precautions.

1. Pay special attention not to use strong acid (it is best to use white vinegar) to avoid corrosion on the surface of the shower.

2. The ambient temperature of the shower should not exceed 70 High temperature and ultraviolet light will accelerate the aging of the shower and shorten the service life, so the installation of the shower should be kept away from the heat source of electrical appliances such as bath bombs as far as possible.

3. Be careful when prick the shower hole with a needle, but don't puncture the shower hole.

4. If the shower has a certain number of years, you can choose to change it to a new one to avoid the accumulation of harmful bacteria and impurities in such a shower and affect your health.

5. Before the end of each shower, use a towel to scrub the shower outlet to prevent the remaining scale.

What to do if the shower head is clogged with limescale - use lubricant.

The material of the sprinkler head in each person's home is different, and the corresponding dredging solution is also different. If your sprinkler head is metal, the metal sprinkler will rust after a long time, you can use a rust removal and anti-rust lubricant to unclog the water outlet. This rust removal lubricant can have good affinity and permeability with metals.

It is possible to separate the rust layer from the metal layer. Makes the rusty part and the metal contact surface, and leaves a protective film. Let the shower never die.

If you don't have a stainless steel shower in your home, you may need this method.

What to do if your shower head is clogged with limescale – how to prevent your showerhead from clogging.

Although the blockage of the sprinkler head is a minor problem, it affects the mood of use. In order to make the water discharge of the sprinkler head smoother, we should do a good job of daily maintenance. It is recommended that you can use the following methods to maintain your shower head.

1. To remove scale, remove the shower and put it in a small basin every six months or less, water and soak the surface and interior of the shower with edible white vinegar for 4-6 hours, and then gently wipe the spout on the surface of the shower with a cotton rag. After re-inserting the joint, the water is passed for a while, and the white vinegar and scale flow out with the water to eliminate or reduce the impact of scale on the shower, and can have a certain sterilization effect.

2. Maintenance of the electroplating surface of the faucet: often wipe the electroplating surface of the shower with a soft cloth with a little flour, and then rinse it with clean water to make the surface of the shower as bright as new.

<> "How to clean the bathroom sprinkler head when the scale is blocked.

1. If it is only a slight water sensitive scale, remove the nozzle for cleaning. If it is serious limescale, soak the nozzle in vinegar for about 10 minutes, and then clean it.

2. If the small hole is blocked, you can use a needle to pierce the small hole Zhou Xiaohail until there is a water book sail flowing out of the hole, and the piercing force must be controlled.

3. The water holes of the nozzle are designed with rubber particles, and the rubber particles can be easily crushed by wiping the rubber particles with your fingers, which is much easier to clean.

How to choose a bathroom sprinkler.

1. Look at the sprinkler spool.

If the valve core is broken, then the sprinkler head can no longer be used, and the sprinkler head must be replaced.

2. See the way the water is present.

There are also many differences in the way of meeting the water, and it will affect the feeling of bathing, and its water mode is also divided into general, strong beam and other ways, among which there is a five-stage type is still more popular with people, this has a strong type, gentle and other modes, you can adjust it at will when using, and it is suitable for use in different families.

3. Look at the brand.

Now most consumers are more and more recognized by the brand, usually in the case of economic conditions, the first consideration is to buy brand products, it can be said that a brand nozzle is more advanced in terms of quality, and the after-sales service is also relatively perfect.

If the shower is partially blocked by small holes, then release the water first to see which holes are blocked. Then you have to open the shower's socks and sprinkle your head, and you can see that the showerhead has a lot of holes in the showerhead. This is where the water comes out.

Then we prepare a needle first, and then use the needle to puncture the impurities in the hole with the small hole we just saw without water until there is no impurity in the hole. This method is the most straightforward, but be careful to puncture the shower holes.

When cleaning the shower head (showerhead), special care should be taken not to use strong acid (preferably white vinegar) to avoid corrosion on the surface of the showerhead. In order to ensure that the shower head does not block the stove car plug, it is best to clean the shower head every six months or less, so that you no longer have to worry about the sudden blockage of the shower head when taking a bath, so as to affect your bathing mood.

At the same time, in order to ensure the service life of the shower head (shower), it is best for us to keep it not directly below the bath bomb when installing, and it is best to be more than 60cm away from the bath bomb, and often wipe the surface of the shower with a soft cloth with a little flour to make it still as new.

However, if the metal of your shower is rusty and the blockage is very serious, then you have to use WD-40 anti-rust lubricant. This rust removal lubricant can have very good affinity and permeability with metals. It is possible to separate the rust layer from the metal layer.

Makes the rusty part and the metal contact surface, and leaves a protective film. Let the shower never die.

If your shower at home is still in good condition, you can't take it lightly and start with prevention. Usually you should develop a good habit of showering and bathing. Before each shower, use a towel to scrub the shower spout to prevent limescale from remaining.

If your shower is a certain age old and has an older appearance. It is better to replace it with a new shower. The continued use of such a shower is not good for health. Because there may be a lot of harmful bacteria and impurities in it.

After the scale of the bathroom sprinkler head is blocked, you can use a brush to clean the scale brush in the sprinkler head, which can effectively remove the scale. You can also use white vinegar or baking soda solution to soak the nozzle to soften the limescale on the top and remove it more easily. Note that the metal spray is not soaked in vinegar, as it is easy to be corroded and the color is lost.

If the scale of the bathroom sprinkler head is blocked, you can remove the spray head and use a brush to clean the blocked scale and other dirty land, which can effectively solve the problem that the sprinkler head is blocked and cannot produce water or the water output is small. It is best to use an artificial bristle brush, not a steel brush, so as not to damage the soft plug of the nozzle.

When the scale of the nozzle cannot be completely removed and brushed, you can choose to remove the nozzle and soak it in white vinegar and 10 times the aqueous solution, and soak it overnight to soften the scale, which is easier to clean. It is best not to soak the metal nozzle with white vinegar, which is easy to fade.

Baking soda is an alkaline substance, which can remove the scale that belongs to the acidic substance, remove the shower head and soak it in the baking soda aqueous solution, which can appropriately extend the soaking time in order to completely remove the scale. You can also remove the hose connected to the nozzle and soak it to remove the limescale.

Here's how to remove limescale from shower heads:

<>4. Let it stand for two hours, as shown in the figure below.

5. Finally, the scale of the shower head will be cleaned, as shown in the figure below.