What happens when you press the accelerator and brake together?

The so-called drift refers to the wheel idling and the car is in a state of skidding Several methods of drifting are to hit the steering wheel while braking (when accelerating), and when there is a strong inertia, the grip of the rear wheel is sharply reduced, and then the car will slide due to inertia The action you see is analyzed as follows.

The action of pressing the accelerator with the brake heel on your toes. This is the key to drift control.

The car drifts into the corner and cuts in from the inside line.

Now it is also called toe braking, not how much to slow down, but to make the front of the car sink and the center of the body fall to the front wheels.

After the center of gravity is moved forward, the clutch under the left foot is faster to close the clutch and at the same time, the right hand controls the gear downshift and moves into the lower gear.

At this time, the brake of the left foot is slightly released, and the accelerator is lightly pressed with the heel of the right foot, and it is necessary to pay attention to controlling the speed of the car with the brake and keeping the front wheel of the car not to brake too much and slip too much, and at the same time, control the accelerator not too much to prevent stalling.

Because the front wheels of the car are rolling, the rear wheels will not be the same as the front wheels when they accelerate, and the rear wheels will slip because the weight of the car is on the front side.

I felt the rear of the car fluttering and skidding, so I slammed into the direction of the center, causing the car to oversteer.

This is by releasing the brakes, gently controlling the throttle with your right foot, reversing the direction of the shot, constantly modifying the angle of the body, and keeping the car on the inside of the corner.

When it comes to exiting the corner, increase the direction of reversal and throttle, accelerate into gear, OK, and complete the corner.

In the past, when I was learning to drive, the coach taught me that it was called a two-legged vehicle. It can be used when driving a big truck and when starting uphill. Hardly anyone does that anymore.

The effects of pressing the brake throttle together are:1. The vehicle is a rear-wheel drive vehicle, which will cause tire scratching in situ;

2. The engine will make a violent roar;

3. The manual transmission car will turn off directly when it is in high gear, and the brake in low gear will not brake the car;

4. Damage clutch and transmission parts;

5. It will make the gearbox report the shed state in advance;

6. Burn out the clutch plate, resulting in different degrees of unnecessary maintenance. Braking, also known as braking, refers to the action of stopping a moving locomotive, rolling stock, or other means of transport or machinery from slowing down. The throttle, also known as the damper and throttle, refers to the control device that controls the power thrust of the engine, and controls the throttle opening of the bihezhi carburetor to control the filling amount of the cylinder and determine the output power of the engine.

<> "What happens if you press the accelerator and brake at the same time.

What happens when you press the accelerator and brake at the same time while driving? Few people do this in real life, generally in the TV we watch, when the car god is racing in the corner, one foot lightly steps on the brake, and at the same time the heel steps on the accelerator, this method of operation is to make the tire wall grind to a certain extent after the start faster, more often when cornering.

1.If the accelerator and brake are stepped on at the same time, it will increase the fuel consumption of the vehicle, cause wear and tear to the brake disc, if the speed is relatively fast or the road conditions are not very good, the accelerator and brake are stepped on at the same time, it is easy to make the vehicle deviate, causing harm to safety.

2.When the automatic transmission car starts, step on the brake and accelerator at the same time, the body seems to have no movement from a distance, and you can find that the rear wheels are spinning in place, which is commonly known as burning tires, but this kind of car only appears in the rear pants and drives the car, and the front-wheel drive car is unlikely to appear like this, but it will eventually wear out to the engine (the manual transmission will not start).

3.If you press the brake and accelerator together while driving, the car will still stop as usual, but the car will nod forward sharply and then stop immediately, similar to the usual sudden braking. This is because most cars have a brake priority system, abbreviated as BOS, if the brake priority system detects that the driver intends to brake, but the brake is not successful, it will automatically switch the working state of the engine to the idle state, preventing the car from continuing to rush forward.

That's all for you about what happens when you press the accelerator and brake at the same time.

Summary. Hello, the accelerator and brake at the same time will increase the fuel consumption of the vehicle, cause wear and tear to the brake disc, if the speed is relatively fast or the road conditions are not very good, the accelerator and brake at the same time, it is easy to make the vehicle offset, causing harm to safety. The accelerator and brake can not be stepped on at the same time, you must know which side is the brake, which side is the accelerator, the driver must have the knowledge, if you can't even tell the brake and the accelerator person is very dangerous.

Hello, the accelerator and brake at the same time will increase the fuel consumption of the vehicle, cause wear and tear to the brake disc, if the speed is relatively fast or the road conditions are not very good, the accelerator and brake at the same time, but also He dust and land is easy to make the vehicle offset, causing harm to safety. The accelerator and brake are not allowed to be stepped on at the same time, you must know which side is the brake, which side is the accelerator, the knowledge that the driver must have, if even the brake and the accelerator can not distinguish the person is very dangerous.

Pro, the accelerator and brake may appear when pressed together, and if you step on it at the same time, it may be called deceleration braking; It is also possible that there is no slowdown, or not much slowdown; One of the last things that can happen is an in-place burn-in-place. In general, stepping on it at the same time is not a big problem. When the brakes and accelerator of the car are pressed together, the rear wheels spin in place.

Although the car is not driving normally, this phenomenon is very draining on the life of the tire, which is also known as tire burning. As soon as you release the brakes, the car will pop out immediately. The second situation is that the brake device of the car will be activated, and the car will stop immediately when the limb is driving, and the stationary car will not start, and the former is similar to emergency braking.

The last case is that it will slow down the vehicle.

Pro, the brake throttle is not stepped on together, if they are stepped on together, there will be some effects: 1. Different vehicles will have different effects, and it is generally not recommended to try; 2. If the general automatic transmission car is roughly stepped on together with the first orange beam of the accelerator and the brake, the transmission will be scrapped prematurely; 3. The manual transmission car is easy to burn out the clutch plate, causing different degrees of damage and unnecessary maintenance.