The mobile phone can be on the wifi, but the computer that sends the wifi does not have the network

There's no way around it, unless you're using your phone to surf the internet.

I use a laptop with Windows XP system, and there is wifi at home, but I can't access the Internet after the computer is connected, how to solve it. Mobile phone with internet access.

WinXP computer is connected to the wireless network but can not access the Internet, many users do not know how to solve this problem, so the following solutions have been sorted out. Method Steps: 1. The connected wireless network terminal is a wireless signal with only the output and no input, and the entire wireless router is turned on, but there is no dial-up Internet, so you will definitely not be able to access the Internet.

What should I do if WinXP is connected to the wireless network but cannot access the Internet? 2. Connect your router (LAN port) to your computer's network cable interface, log in to your routing settings interface, and set your sum password in the "WAN port settings" in "Network Parameters" (some are "Advanced Settings"). What should I do if WinXP is connected to the wireless network but cannot access the Internet?

3. Re-enable "Wi-Fi Connection": disable it first, then enable it (in the right-click menu). If you are wired and can not be connected wirelessly (without dial-up connection), first connect your router (LAN port) to your computer network cable interface, log in to your routing settings interface, and reset the security key

Select Disable. After disabling the DHCP server, etc., connect your router (LAN port) to the LAN with a network cable. What should I do if WinXP is connected to the wireless network but cannot access the Internet?

4. Try the super NIC recovery command, and then set it up. Start --Run --Enter cdm --OK --Enter netsh winsock reset after pop-up --Enter, (with spaces). Kill ARP virus and check the security settings in the router.

What should I do if WinXP is connected to the wireless network but cannot access the Internet? 5. Open the wireless connection of the notebook, click on the attributes, modify the IP to all the same as the desktop, including DNS, etc., after the modification, save the connection, and then you can use it, there will be a problem with the method, that is, the IP address conflict, don't panic, there will be an IP conflict after the modification, modify the IP in the first column according to the first step, remember, only modify the last value such as 192**8 Change the last value to 9 or 7, etc., and you can use it at the same time after saving.

What should I do if WinXP is connected to the wireless network but cannot access the Internet? 6. If the above operations have no effect, it is recommended to restart the computer or reconnect to the wireless network. WinXP computer connected to the wireless network but can not access the Internet solution is here, it is recommended that you first check whether the router socket is connected, if there is a restart route and the computer, or not, then change the IP address.

Summary. For the above three possible failure causes, there are the following solutions:

If it is a physical fault of the wireless network card, then you need to take it to a repair point or find a friend to help repair it, which is my suggestion and something I can't help solve.

If it's the driving reason, please continue to step 2 below.

If the BIOS is disabled, the solution can be found at the end of this article, but this is usually not the key cause of the problem.

The XP computer can't connect to the wifi while the mobile phone can.

If the mobile phone can connect to wifi, it means that the network is fine, that is, the computer is not set up. Right-click on "My Computer", click on "Network Adapters", and see how many hardware devices there are under "Network Adapters", if there is only one hardware device, then it is the key to the problem.

There are three possible causes of failure: a physical failure of the wireless card, a problem with the driving of the wireless card (which is the key cause of the problem), and the BIOS disabling the wireless card.

For the above three possible fault causes, there are the following solutions: if it is a physical fault of the wireless network card, then you need to get a repair point or find a friend to help repair it, this is my suggestion, and it is also something I can't help solve. If it's the driving reason, please continue to step 2 below.

If the BIOS is disabled, the solution can be found at the end of this article, but this is usually not the key cause of the problem.

Now the school's network is generally limited on the client (and limit the speed of transmitting wifi), you bypass the client, try with the poppe client that comes with the computer, if not, there are cracking tutorials on the Internet, but it's a bit complicated.

1,, Check if the wireless connection has network access and see if the local connection is shared to the wireless connection2

2. Whether to assign a valid IP address and the best DNS

The reasons why the mobile phone is connected to wireless wifi but cannot access the Internet are:

1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet.

2. Router problems, the router may be overheated or damaged.

3. Broadband arrears may lead to inability to access the Internet.

4. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet.

5. There may be a problem with the mobile phone system, which may cause the connection to wifi but the Internet cannot be accessed.

Suggested workaround:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet, and rule out the wifi itself.

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

3. Contact broadband customer service to confirm whether there is any abnormality in the broadband account, such as arrears, recharge the broadband, and then dial up to connect.

4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting.

5. If the above reasons are ruled out, it is likely to be a problem with the mobile phone system for a long time, it is recommended to restore the factory settings or flash the phone to see if it can solve the problem.

Hey, it's just a little thing, how bad it is to become a thief yourself.

Possible reasons and solutions for mobile phone not connecting to wifi network:

1.First of all, check if the wireless router is working properly, you can use other mobile phones or digital products to connect to it.

The wifi signal, if you can connect and surf the Internet normally, then generally speaking, this router can work normally.

2.The phone is turned on to sleep and the network is turned off.

Check whether the phone has the option to turn off the network in the dormant state, the phone will be disconnected after a period of time or cannot receive the background chat software, the possible reason is that the phone is turned on the function of turning off the network by mistake.

3.If you use the router for a long time, the router may freeze its death. Just restart your wireless router.

4.The type of certification is not suitable. Try changing the authentication type of your router and select Secure.

wpa2-psk”

The type mode is good, and the following encryption algorithm is best chosen.

aes”。5.The network settings of the mobile phone or router are abnormal. Consider restoring your router factory settings and cellular network settings.

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to roll high and disconnect the power supply of the router when plugging it in, and I'll take a look. In there is a factory reset, it can be used from the new settings (this is under the premise of the correct physical connection, sometimes caused by the router's slow or failed IP address search, not that the router is broken).

If it can't always be solved, it is recommended to call the customer service of the router, they have **** guidance, I encounter problems that I can't solve, it is very useful to consult the advice they give, and they will give correct suggestions for your settings or operations.

3) If you turn off the wireless switch, turn it on, if it is a wireless connection with software, it is normal for the software to be difficult to use and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

I practice mobile phone or other computer can access the Internet, not necessarily your computer can access the Internet, the method look at the above, if you have any questions, ask me.

5) If you have any questions, please ask me.

What are the functions of the combinator and the controller? What are the functions of the combinator and the controller?