How to determine whether the water pipe is frozen or the water is out

Turn on the faucet and hear the sound of pumping, that is, the water has stopped (because the water stops, the water pressure drops, and the water in the original water pipe will flow backwards, resulting in a pumping sound); If there is no sound, the pipes are frozen.

Look at your neighbors, or the people in the next building, if they have water in their homes.

If not, the water is out.

If it's likely to be frozen, look to see if the pipes outside your home are exposed, or where they haven't been insulated after being dug up, or where they've been buried shallow and thin. If it is a building, it may generally freeze at the entrance of the first floor. After finding it, it should be boiled with hot water, and then strengthened to keep it warm to prevent it from freezing again in the future.

You can listen to whether there is any sound.

Under normal circumstances, if there is more water at minus 10 degrees, the pipeline will be frozen.

Of course, the water pipes that are easy to freeze are generally outdoor pipes, especially outdoor faucets, or indoor and outside or if there is a basement in the home, there will also be corresponding problems, and it is obvious that there is also the entrance of the opening, because these places are often opened or closed, and cold air is easy to come in.

When the faucet freezes, release the water on the faucet joint, then use a wrench or pliers to disassemble the faucet roughly. When disassembling, it is important to take care to ensure that the ice at the faucet joint has been completely melted by the boiling water. Try to move with tools such as pliers and wrenches.

If it is too hard, it may not melt completely.

The reason why the water pipe freezes is that the water does not flow and the temperature is too low, and I am really helping you look forward to it

There are several ways to view this:

1. Look at the color.

The color of the frozen plastic water pipe will be darker than the price, and the color can be judged by observation.

2. Listen to the sound.

Find something and knock on the water pipe, and depending on the pronunciation, you can tell where it is frozen.

3. Instrument testing.

There is also an instrument that can measure this, but it is a bit overkill to buy and measure this.

Note: Don't use too much force when knocking, of course, don't be afraid of galvanized pipes.

If it is iron, the sound of the frozen place will be smaller.

Just knock on something and you'll find out: you can tell by the pronunciation. But you can't use too much force, of course, you don't have to be afraid of galvanized pipes.

It is possible that the water pipe is frozen, as long as you boil the water, it is possible to freeze it all. In winter, if it is outdoors, it is recommended to open the water pipe a little bit so that it can continue to flow, and use a large bucket under the water pipe to connect it. This way it won't freeze and the coldest days of winter will be fine.

That's what we do in every house. Hope it helps.

The instrument is there, but it is too expensive. I'm afraid it's a bit overkill to test this.

Also, wrap the hose in foam. This one makes it freeze. Isn't it too good?

There will be no more freezing in the coming year.

Turn on the faucet, if you can hear the sound of pumping, it is a water stop, because the water stops, the water pressure drops, and the water in the original water pipe will flow backwards, resulting in a pumping sound; If there is no sound, the pipes are frozen. When the water pipe is frozen, steam, hot water, fire roasting and other means can be used to melt the frozen ice in the water pipe into water and discharge. It is also possible to unload the pipe and use a hose thinner than the pipe to inject steam, water, salt water, etc. into the pipe to melt the ice in the pipe and dredge the pipe.

Turn on the faucet, if you can hear the sound of pumping, it is a water stop, because the water stops, the water pressure drops, and the water in the original water pipe will flow backwards, resulting in a pumping sound; If there is no sound, the pipes are frozen.

When the water pipe is frozen, steam, hot water, fire roasting, electric heating and other means can be used to melt the frozen ice in the water pipe into water and discharge, so as to achieve the dredging effect. It is also possible to unload the pipe and use a hose thinner than the pipe to inject steam, water, salt water, etc. into the pipe to melt the ice in the pipe and dredge the pipe.

Uninsulated water pipes. It is advisable to find out the original hydropower map.

2.attics, underground tremor rooms, or nearby waterways.

3.Water pipes near the vents.

4.Outdoor water pipes. In addition, looking for water leaks or cracks in the wall is also one of the ways to do this.

Because, once the water pipe is frozen, it is easy to rupture due to pressure changes, so the leakage may be the freezing point, it is recommended to close the water stop valve immediately and replace the water pipe.

Step 2) Turn on the faucet.

Once you find the frozen area, you can thaw it. At this time, you should turn on the faucet and try to use the water flow to slowly melt the ice in the pipe. Reminder, if the faucet is also frozen, don't force it, be sure to thaw it first; Secondly, it should be noted that if the same water pipe is connected to both hot and cold water faucets, remember to open them to reduce the pressure in the pipe.

If this method does not work, the next step is to heat the water pipe to melt the ice.