How to solve the freezing of water pipes, how to solve the freezing of water pipes

Wrap it tightly with insulated cotton and you're good to go!

The solution to the freezing of the water pipe is as follows:

1. If the water pipe is frozen, you can take the method of hot compress, prepare a towel, and wrap the frozen part, including the faucet. Then pour it slowly with hot water, not too fast, so that the towel can be kept at a certain temperature and thaw after a while. If it is a PPR pipe, the time may be longer, and if it freezes too much, it can be repeated many times.

2. The second method can increase the temperature through a hair dryer or a local heat gun. Or we can turn on the heating or bath bomb in the room, etc., which can make the temperature in the room rise and the ice cubes dissolve.

3. The third method is more advanced, it is a kind of anti-freezing artifact of water pipes, which is equivalent to wrapping the electric blanket in the water pipe, which can be wound on the water pipe, and can increase the temperature of the water through electric heating, which plays a preventive role. However, because it uses electricity, you must pay attention to the safety of electricity.

How to prevent water pipes from freezing:

1. Pay attention to the weather forecast at any time, and take protective measures before the cold wave arrives. Whether it is indoor or outdoor, including water meters, water pipes, faucets, etc., it can be wrapped with cotton and linen fabrics or other thermal equipment. In addition, for outdoor water meters, it is also necessary to do a good job of anti-freezing bandaging around the pipeline.

2. In the cold winter, you need to empty all the water in the water pipe before going to bed, and you also need to close the valve of the water meter. Close doors, windows, and hallways to maintain room temperature.

3. You can turn on the faucet, adjust it to a relatively small water flow, let it form a line, and then slowly drip down. As long as you can ensure that there is water flowing in the Yulachang, you can avoid being frozen.

Find and confirm the frozen part of the water pipe in the building, thaw the frozen position of the water pipe, and treat the water pipe after thawing.

Electric heating belts are our most common type of heat tracing. Use the electric heat trace to wrap around the water pipe section, and then power on the upper mouth of the electric heat tracing, so as to ensure that the temperature of the electric heat trace is always at about 10. It is also possible to ensure that the water in the inner water pipe does not freeze.

It is to wrap the outer grip of the water pipe that is easy to freeze around the insulation pipe for insulation.

If the water pipe in the building is frozen, you can use a hot towel compress, a hair dryer to bake, a fire to bake the water pipe, and find a water company to solve the problem.

1. Apply a hot towel

When you find that the water pipes in the building are frozen, you can apply a hot towel to the frozen position, and the hot towel does not need to be very hot, as long as it is warm. The hot towel allows the frozen area to be thawed slowly, allowing the water supply to return to normal in the building.

2. Hair dryer baking

When you find that the water pipe of the building is frozen, you can also use the hot air stall of the hair dryer to continuously blow back and forth on the frozen position of the water pipe, so that the frozen position is slowly melted, and at the same time turn on the water pipe switch to release water, and you can stop the hot blowing when the water pipe resumes normal water supply.

3. Fire roasting water pipe

When you find that the water pipes of the building are frozen, you can also use fire to slowly melt the frozen area. When using this method for thawing, do not let the fire get too close to the water pipe, if it is too close, it is easy to cause the closed water pipe to burst.

4. Find a water company

If the frozen position of the building water pipe is located inside the wall or underground, then the user cannot thaw it by himself, so he needs to give feedback to the after-sales personnel of the water company, and then let the other party arrange professionals to help detect and thaw it.

Precautions for anti-freezing of water pipes in winter

1. The anti-freezing method should be prepared in advance, for example, it is necessary to take precautions in advance, so as to prevent some frost cracking phenomena in the future.

Now there are many materials that play a role in heat preservation, the more commonly used is to use cotton linen, in order to achieve a better effect, you can wrap a few more layers, you can also consider painting some patterns on it to decorate, and at the same time, you can also coat antifreeze on the outside of the tube, which also plays a protective role.

2. If it is in winter, it may be protected by indoor heating methods, and the use method should be noted, such as heating equipment, some people will have dripping water to solve, so it is relatively wet, so it is not recommended to use it like this, but the car can be assisted by using temperature sensing elements, for example, when the temperature reaches zero degrees, the switch can be turned on, and the water in the pipe will flow, so as to prevent freezing.

1. Hot compress method. The so-called hot compress method is to use a towel, wrap the frozen part, including the faucet, and then pour hot water on the towel, do not need to be too urgent, just pour it slowly, let the towel maintain the temperature, generally speaking, the iron pipe will be good for a while. The PPR pipe conducts heat slowly, and if it takes a little longer, the water pipe will thaw.

If the freeze is too severe, you can try pouring it a few more times. This method is simple and practical, and it is very easy to operate.

Do not pour boiling water directly, the water will flow away directly, and the waste of water will not thaw quickly.

2. Hair dryer and heat gun. We can use a hair dryer to blow the water pipe, this method is a bit slow, and the iron pipe or metal faucet conducts heat quickly. In particular, PPR should pay attention to the fact that the temperature is too high will burn the water pipe, do not stay in one place to blow, and heat evenly from a distance.

3. Water pipe heating belt. This is a water pipe antifreeze artifact now, which was not available before, similar to an electric blanket, but this is to wrap it around the water pipe, and increase the temperature of the water pipe to prevent freezing through electric heating.

This method is very simple and very useful, but you need to buy an electric heat tracing, which can be reused. There are also intelligent controls, so you don't have to worry about plugging them in. Of course, you should also pay attention to the safety of electricity when using.

One is to do a good job of insulation, and the other is to put a small stream of water in the water pipe, just fine.

Use a hot towel to apply a water pipe: Use a hot towel to apply to the water pipe, the towel does not have to be too hot, it is okay to be warm, use the heat of the towel to melt the ice inside the water pipe.

The water supply will soon be restored.

When there is no power supply around, the effect of a hot towel is very limited if you are outdoors. You can use fire roasting to melt the ice.

Do not get too close to the water pipe when grilling it to prevent it from bursting. Find a water company to solve the problem.

If the frozen water pipes are in the walls or underground, the water supply can be restored by finding a solution with the local water company.

Precautions: The public can carry out simple anti-freezing protection for water facilities. For example, cotton and linen fabrics and plastic foam can be used to wrap water pipes, water meters, and faucets.

At night, the windows of the kitchen and toilet should be closed, and the faucet should be slightly unscrewed to make the water in the water pipe flow without freezing.

If the water pipe is frozen, use a hair dryer to blow it, or wrap the water pipe in a towel and pour it slowly with warm water. Do not bake or blanch with boiling water, as this will burst pipes and water meters.