Help: After the iPhone is turned on and restarted, it keeps stopping on the boot screen What should

1. Normal shutdown: long press.

power (power button, power on and off button) for a few seconds.

clock, and slide it to power off when the red slider appears on the screen.

Sometimes the phone freezes or becomes unresponsive, and at this time it is not possible to go through the normal method.

Shut down, you can use force restart and force shutdown to resume work.

2. Forced shutdown: press and hold at the same time.

power(power button, power on/off button)+

Home button, and release it when the screen goes black.

home button.

The white apple logo will appear within a few seconds after the home button is released, at this time, do not release the power button, wait until the white apple logo disappears.

Shut down after the screen is off.

3. Force Restart: Press and hold the power and home buttons at the same time.

Hold it for a few seconds, let go after the white apple appears on the phone screen, and then the phone will automatically restart.

1. Connect to your computer.

2. Press and hold the home (back button) + power button of the iPhone for 10 seconds (the time must be enough), then release the power button and continue to press and hold the home button.

3. At this time, the computer's iTunes (must be opened beforehand) will display a dialog box: "An iPhone in recovery mode has been detected." Click OK, then hold down the shift key on your computer and click "Restore" with the left mouse button.

The restore may take a while, which will erase all data, but if it has been backed up, it can be restored from the backup (but the program will be gone, but the old settings are still there).

First, press and hold the "Power" button on the top of your iPhone. In general, your iPhone automatically restarts and then returns to its normal state.

Second, when long pressing the power button doesn't work. You can also press and hold the Home button and the Power button at the same time for more than 5 seconds to force your iPhone to turn off. In general, the phone will go black, and then press the power button of the iPhone to turn it on.

Third, when all the above methods can't get the iPad back to working properly, you can keep the iPhone in a dead state and let it drain the battery by itself. When your iPhone runs out of battery, it automatically shuts down. At this time, charge your iPhone with a power source, charge it for a while, and then press the "Power Button" on the top of your iPhone to turn it on.

It is also very common to encounter such and such problems in the process of using Apple mobile phones. When our Apple mobile phone is turned on, the result is that the screen has been stuck in the boot interface and cannot enter the mobile phone system normally, resulting in us not being able to use the Apple mobile phone normally.

The solution to the iPhone boot stuck in the boot interface:

1. If the Apple phone has been stuck in the "Apple logo" interface after booting up, we can try to shut it down again and then restart it to see if it can enter the system interface normally after rebooting.

2. There is also the encounter that the Apple mobile phone cannot enter the mobile phone system interface when it is turned on, at this time we check whether the mobile phone shows a progress bar, if there is a progress bar, it is caused by the Apple mobile phone system update, regardless of it waits for a few minutes, when the system update progress is completed, it will automatically enter the mobile phone system.

3. If it is not for the above reasons, the boot interface is displayed all the time, then the Apple phone may be dead, and we only need to force restart the Apple phone to solve it. Here's how to force restart your iPhone:

Press the volume adjustment button once, then quickly release it.

Press the volume adjustment button again and release it, and then keep pressing and holding the power button on the side until you see the Apple logo (this forced shutdown and restart method is applicable to iPhone 8 and above series models).

4. If it still doesn't work, and there is no response in the boot interface for several minutes, then please try to charge it with an Apple phone data cable or connect the Apple phone to the computer, and then see if it is normal.

5. After operating through the above methods, it is still displayed on the boot interface, then you can only wait for the phone to run out of power, and then recharge and restart to see if the problem is solved.

6. In addition, if the above operations are not effective, then you can only contact Apple after-sales maintenance and testing to see if the problem is caused by the internal hardware.

The solution to the iPhone won't turn on:

Apple mobile phone can not turn on first to determine, is it because of the reason that the mobile phone battery is dead, first charge the mobile phone for a while and press the power button to see, it may be because the mobile phone is not low enough power to cause the mobile phone to not turn on normally.

In this case, the Apple mobile phone can't turn on, and it may be that the phone is in a dead state, you can also try to press and hold the power button at the same time, the power on button + home button, and wait a few seconds for the phone to automatically restart.

There are usually Apple mobile phones in the process of flashing or updating and upgrading, you will also encounter the problem of not being able to turn on, and when you encounter the problem of not opening the machine caused by this reason, usually due to the improper operation of the mobile phone flashing or system upgrade, the white apple, the boot has a display, but it has been parked in the logo interface of the iphone, and the mobile phone cannot enter the system.

If the above methods cannot solve the problem, then it may be caused by the hardware failure of the mobile phone, such as: the Apple mobile phone boot button is broken, the battery is aging, etc., it is recommended to contact Apple for repair to solve this problem.

Connect your phone to your computer - Turn off your phone - Press and hold the power button and the home button at the same time - Turn on iTunes - Recovery mode - Recovery.

Steps: Method 1:

1. Connect your phone to the computer and turn it off.

2. Press and hold the power on button and the home button at the same time.

3. When the white Apple logo appears, release the power on and off button, and continue to press and hold the home button.

4. Open iTunes, wait for it to prompt you to go to recovery mode, press and hold the shift key on the keyboard, click "Recover", and select the corresponding firmware for recovery.

Reasons why the Apple phone can't turn on:

1. There is no electricity. If you use up all the battery power, the charge needs to be charged to 5% before it can be turned on normally. So in this case, please let the phone charge for a while before trying to turn it on.

2. Software malfunction. If you are sure that the current battery of your phone is sufficient, but it cannot be turned on normally, there may be a problem with the software system of your phone. At this time, we can try to press the home button + power button on the home screen of the mobile phone at the same time until the screen is lit up and there is a display.

3. System crash. If none of the above solutions work, and you see an iTunes connection screen on your iPhone's screen, it means that your phone has entered recovery mode at this time. When this happens, the only way to do this is to restore the system for your phone.

Connect your phone with the computer with a data cable, press and hold the home button and the power button at the same time for 10 seconds, then release the power button and continue to press and hold the home button for 5 seconds, if you see the connection to iTunes, it is a failure, and you have to start again. If the screen doesn't light up after these 2 steps, you will enter DFU recovery mode, and then you can use iTunes to restore your iPhone, or use a third-party flashing software to reflash your iPhone.

How to deal with the iPhone not booting normally:

1. Check whether the iPhone has physical damage, such as: bending deformation or water ingress and other accidents;

2. Use the original data cable and charger to charge the iPhone, check whether the iPhone is responsive, and the battery may not turn on if the battery is insufficient;

3. Force restart your iPhone;

4. If there is still no response or cannot be turned on normally after the above operations, it is recommended to go to the local Apple official or authorized after-sales service.

Don't look for much, that's the one.

1. Pay attention to shutting down and plugging the card in the future 2, force shutdown, restart, you can operate repeatedly 3, if it still doesn't work, you can connect to the 91 mobile phone assistant, connect, point system maintenance, white apple repair tool 4, if you can't connect to 91, only re-flash.

What should I do if the Apple phone has been booting up the screen since it was turned on, and I can't get into the system?

Enter DFU mode: Turn off the phone, then press and hold the volume down button and the main button at the same time until the screen turns black and then release, then press and hold the volume up button until the prompt box appears. 3.Reset iOS System:

Connect your phone to your computer, open iTunes, enter recovery mode, click the recovery button, and follow the prompts.