How to identify the inner and outer dimensions of the truck?

The overall size is the longest, widest, and tallest of the car. Length: from the mirror to the back of the car; Width: If the front mirror is the widest, measure the mirror, and if the back head is wide, measure the last braid; High: The highest from the ground to the car.

How to identify the inner and outer dimensions of the truck?

Truck interior and exterior dimensions identification method:

1) 10995*2490*3720 means length * width * height, and the unit is millimeters (mm).

2) The inner space of the truck indicates the width * length (the height is generally open).

3) Exterior includes the front and full body length.

1) Wagon is a commercial vehicle designed and equipped mainly for carrying goods, whether it can tow a trailer.

2) The vehicle is usually composed of four parts: engine, chassis, body, and electrical equipment.

Who knows the specific size of the side parking of the big truck, thank you?

1. It is best to see that the center point of the back is aligned with the right rear rod and deviates from 20 cm.

2. Large vehicle parking space: The width of the large vehicle parking space is 4 meters, and the length is 7 meters to 10 meters, depending on the model.

3. According to the relevant provisions of the "Code for the Establishment of Motor Vehicle Driver Test Venues and Their Facilities (GA 1029-2012)", the side parking items in the subject 2 test are designed as follows:

control lines; l - the length of the parking space, large buses are times the length of the car minus 1m, small vehicles are times the length of the car plus 1m, and other vehicles are times the length of the car; w - wide parking space, car width plus; w - the width of the lane, the width of the car plus.

At present, the common technical scheme is to adopt the combination of a plurality of two-dimensional laser ranging sensors to realize the measurement of the overall dimensions of multi-lane vehicles, and the two-dimensional laser ranging sensor is limited by the scanning frequency, and when the vehicle is driving at high speed, there is the risk of missing detection to the object of small size, and at the same time, when the vehicle crosses the road, it is possible that the vehicle head cannot be detected because the front of the vehicle cannot be scanned. In addition, 2D laser distance sensors cannot handle the systematic errors of length measurement and width measurement caused by vehicle deformation and vehicle oblique driving.

In view of the problem that the two-dimensional laser ranging sensor in related technologies cannot deal with the systematic errors of length measurement and width measurement caused by vehicle deformation and vehicle oblique driving, no solution has been proposed.

10995*2490*3720 means length*width*height, and the unit is millimeters (mm). The interior of the truck is wide * long (the height is generally open). The exterior includes the front end and the full body length.

According to the "China Automobile Classification Standard (GB9417-89)" standard, China's cars are divided into eight categories, which are: ordinary trucks, vans, closed trucks,

meters of several types of trucks; Among them, meters, meters are the size of light trucks, meters are medium trucks, and 13 meters are heavy trucks.

If classified by vehicle length and weight:

Ton trucks are generally about 4 meters, and most of them are meters.

Ton car one is about meters.

Ton car one is about meters.

Ton car one is about meters.

Ton car one is about meters.

Tons or 15 tons of cars are generally meters.

Ton trucks are generally meters.

Ton trucks are generally meters.

The truck consists of four parts: engine, chassis, body and electrical system. The operation of the truck is mainly carried out by the engine and the chassis, in which the chassis includes the drive train, the driving system, the steering system and the brake system.

The operating principle of the truck: when we start the car, the engine will generate power, and the power will be transmitted to the gearbox, the power will be converted into high-speed and low-speed high-torque power through the gearbox gear, and then transmitted to the driving rear axle through the transmission shaft, and the driving rear axle will drive the driving rear wheel to rotate, so a car will move.

Generally, the box truck or high hurdle car is the longest, and some non-standard cars have a compartment length of 20m. The dimensions of the carriage with a load capacity of tons are meters long and meters wide; The dimensions of the carriage with a load capacity of 2 tons are meters long, meters wide and meters high; The dimensions of the carriage with a load capacity of 3 tons are meters long, meters wide and meters high; The size of the carriage with a load capacity of 5 tons is meters long, and the national standard for the size of the truck compartment is as follows: 20-foot container:

The internal volume is meters, the gross weight of the distribution is generally tons, and the volume is 24-26 cubic meters; 40-foot container: the internal volume is meters, the gross weight of the distribution is generally 22 tons, and the volume is 54 cubic meters; 40-foot high cabinet: the internal volume is,

The gross weight of the distribution is generally 22 tons, and the volume is 68 cubic meters.

Dimensions of the van:

Tons of trucks (vans), size: length meters, width meters, height meters, actual load capacity: 3 tons 12 cubic meters.

35 tons of trucks (van trucks) size: length meters, width meters, height meters, actual load capacity: 35 tons 110 cubic meters.

Ton truck (van board car) size: length meter width meter height 2 meters, actual load capacity: 5 tons 30 cubic meters.

25 tons of trucks (van trucks) size: length meters, width meters, high meters, actual load capacity: 25 tons 60 cubic meters.

28 tons of trucks (vans) size: length meters, width meters, height meters, actual load capacity: 28 tons 80 cubic meters.

Dimensions of the van:

Tons of trucks (vans), size: length meters, width meters, height meters, actual load capacity: 3 tons 12 cubic meters.

35 tons of trucks (van trucks) size: length meters, width meters, height meters, actual load capacity: 35 tons 110 cubic meters.

Ton truck (van board car) size: length meter width meter height 2 meters, actual load capacity: 5 tons 30 cubic meters.

25 tons of trucks (van trucks) size: length meters, width meters, high meters, actual load capacity: 25 tons 60 cubic meters.

28 tons of trucks (vans) size: length meters, width meters, height meters, actual load capacity: 28 tons 80 cubic meters.

Trends in the development of trucks:

1. Tractors and automatic unloading trucks will be the main models of heavy trucks, and the market share of trucks and vans will gradually shrink.

2. Low-tonnage medium-duty trucks will dominate the medium-duty truck market.

Low-tonnage medium-duty trucks can be matched with four-cylinder diesel engines, with obvious advantages, and the cost performance is obviously better than that of high-tonnage medium-duty trucks, and the flexibility, convenience and economical cargo capacity and cargo space of its models are very suitable for urban logistics.

3. High-tonnage medium-sized trucks and low-tonnage heavy-duty trucks will be in an embarrassing situation, and this tendency has begun to appear, mainly because the transportation efficiency of these types of trucks is relatively low.

Dimensions of the van:

Tons of trucks (vans), size: length meters, width meters, height meters, actual load capacity: 3 tons 12 cubic meters.

35 tons of trucks (van trucks) size: length meters, width meters, height meters, actual load capacity: 35 tons 110 cubic meters.

Ton truck (van board car) size: length meter width meter height 2 meters, actual load capacity: 5 tons 30 cubic meters.

25 tons of trucks (van trucks) size: length meters, width meters, high meters, actual load capacity: 25 tons 60 cubic meters.

28 tons of trucks (vans) size: length meters, width meters, height meters, actual load capacity: 28 tons 80 cubic meters.

The width of all kinds of trucks is mostly in meters wide, and the length is generally different according to the tonnage of the car, etc., from a small truck more than 2 meters long to 15 long (the carriage, the front of the car is not within 15 meters of the base Meng):

1. Wagon is a commercial vehicle designed and equipped mainly for carrying goods, which can tow a trailer;

2. Trucks are generally called trucks, also known as trucks, which refer to automobiles that are mainly used to transport goods, and sometimes also refer to automobiles that can tow other vehicles, which belong to the category of commercial vehicles;

3. Generally, it can be divided into two types: heavy and light according to the weight of the car. The vast majority of trucks are powered by diesel engines**, but some light goods vehicles run on petrol, liquefied petroleum gas or natural gas.

Depending on the truck model, the specifications and standards are also different, and the situation with this front body is as follows

2 meters low hurdle car high hurdle van blue plate.

The length, width and height dimensions are limited to 2 tons, the volume is 15 cubic meters, and the height limit is within 3 meters of the total height of the vehicle and cargo.

2 meters low hurdle car high hurdle van yellow plate.

The width and height of Changsen Xiang is 4 tons, the volume is 15 cubic meters, and the height limit is within 3 meters of the total height of the vehicle and cargo.

2 meters low hurdle car high hurdle van.

The length, width and height dimensions are limited to 5 tons, the volume is 25 cubic meters, and the height limit is within 3 meters of the total height of the vehicle and cargo.

8 meters low hurdle car high hurdle van.

The length, width and height dimensions are limited to 10 tons, the volume is 40 cubic meters, and the height limit is within 4 meters of the total height of the vehicle and cargo.

6 meters low hurdle car high hurdle van.

The length, width and height dimensions are limited to 12 tons, the volume is 45 cubic meters, and the height limit is within 4 meters of the total height of the vehicle and cargo.

7 meters low hurdle car high hurdle van.

The length, width and height dimensions are limited to 15 tons, the volume is 55 cubic meters, and the height limit is less than 4 meters in total height of vehicles and goods.

.5-ton trucks, vans (vans).

Dimensions: length meters, width meters, height meters, actual load capacity: 3 tons, 12 cubic meters.

5-ton trucks, vans (vans).

Dimensions: length meters, width meters, height 2 meters, actual load capacity: 5 tons, 30 cubic meters.

Tons of trucks (refrigerated trucks).

Dimensions: length m Width m Height m Actual load capacity: 8 10 tons 45 cubic meters.

Ton truck (baggage consignment) container model: JAC.

Dimensions: length m Width m High m Maximum load capacity: 3 5 tons.

Ton of trucks (baggage consignment) container models: liberation.

Dimensions: long ridge locust base meter wide meter high meter maximum load capacity: 25 30 tons 85 cubic meters.

Tons of trucks, vans (vans) models: Weiling models: liberation.

Dimensions: length meters, width meters, height meters, actual load capacity: 25 tons 60 cubic meters.

Tons of trucks, vans (vans).

Dimensions: length meters, width meters, height meters, actual load capacity: 28 tons, 80 cubic meters.

Tons of trucks, vans (vans) models: Dongfeng models: liberation.

Dimensions: length meters, width meters, height meters, actual load capacity: 35 tons, 110 cubic meters.

Tons of trucks (board cars) models are hidden: liberation.

Dimensions: length meters, width meters, height meters, actual load capacity: 35 tons, 80 cubic meters.

Ton truck (board car) model: liberation model: Steyr.

Dimensions: length 16 meters, width meters, height meters, actual load capacity: 80 tons, 96 cubic meters.

11. Fleet of dangerous goods vehicle companies.

Dimensions: length m Width m Height m Maximum load capacity: 8 10 tons.

12. Vehicle model: Liberation provides: long meter transport vehicle.

Length and width of various trucks:.5-ton trucks, vans (vans).

Dimensions: length meters, width meters, height meters, actual load capacity: 3 tons, 12 cubic meters.

5-ton trucks, vans (vans).

Dimensions: length meters, width meters, height 2 meters, actual load capacity: 5 tons, 30 cubic meters.

Tons of trucks (refrigerated trucks).

Dimensions: long meters, wide ears, high meters, actual load capacity: 8 10 tons, 45 cubic meters.

Ton truck (baggage consignment) container model: JAC.

Dimensions: length m Width m High m Maximum load capacity: 3 5 tons.

Ton of trucks (baggage consignment) container models: liberation.

Dimensions: length m Width m Height m Maximum load capacity: 25 30 tons 85 cubic meters.

Industry Development:The rapid growth of the national economy has led to a significant increase in the demand for road freight, which in turn has contributed to the growth of demand for trucks. China's logistics costs account for nearly 20% of the country's GDP, about twice as much as Japan and the United States.

There is a great correlation between the demand for trucks and the growth rate of the scale of fixed asset investment in the whole society. In the long term, the factors driving the growth of the trucking industry remain, mainly road freight demand, infrastructure construction and real estate development investment.

The above content reference: Encyclopedia - Truck.

The size of the truck: ton truck (van board car), size: length meter width meter high meter, actual load capacity:

3 tons 12 cubic meters, 35 tons of trucks (vans) size: length meters wide meters high meters, actual load capacity: 35 tons 110 cubic meters, tons of trucks (van trucks) size:

Length, width, height, 2 meters, real load capacity: 5 tons, 30 cubic meters of tan rent, 25 tons of trucks (van let trillion-type board car) size: length meters, width meters, height meters, actual load capacity:

25 tons 60 cubic meters, 28 tons of trucks (van trucks) size: long meters wide meters high meters, actual load capacity: 28 tons 80 cubic meters ......

From Truck Home users.