How much does the GAC Trumpchi GA3S weigh

GAC Trumpchi GS5, there are a variety of models. Among them, the manual comfort version is the lightest, 1560kg. And the automatic prestige, 1645kg.

The overall frame structure is the same, the main difference is the weight of the automatic transmission and the turbo. Hope it helps.

GAC Trumpchi GA3S Vision, 1250KG is about the same as GA3, but it is 2 cm longer.

1.The quality of the GAC Trumpchi GA3S is very good:1.

2.As for the chassis, the Trumpchi GA3 adopts an independent rear suspension with a multi-link structure.

3.It speaks volumes about its development philosophy that emphasizes driving handling and sporty style, and this configuration is also higher than that of non-autonomous cars in its class.

Positioning of the rear suspension.

Featuring front and rear disc brakes, the 16-inch alloy wheels are designed with swivel-style spokes.

55R16, which also belongs to the wider tire width specification in the same class, can ensure better grip; 3.The rear door adopts a hidden window frame door handle, which is also the embodiment of the bold innovation of Trumpchi GA3.

7.The rear of the car is designed in a style much like the previous generation of the Nissan Teana.

8.The sleek light body and the well-defined trunk lid make for a completely different style.

9.The rear lights are designed with transparent housings, and the red marker and brake lights contrast with the yellow turn signals.

Summary. I will find out that the air intake of the Trumpchi GA3 car is normal.

I will find out that the air intake of the Trumpchi GA3 car is normal.

1. This is not accurate, the air intake of different displacements is not uniform, it depends on how many gears you are hanging, and the air intake of different gears is not the same; 2. If you want to give the normal air intake, then look at your own car displacement to calculate, most of the car air intake is 1000-1500g s is considered normal; 3. The air intake refers to the flow of fresh air into the outside world when the automobile engine enters the collapsed mu, and it is the entry of oxygen into the engine when it is working, so as to ensure normal operation; 4. The accurate estimation of the cylinder air intake under transient working conditions is one of the effective measures to improve the precision of the air-fuel ratio control of the engine.

The engine that has just been repaired, the car was destroyed in driving before the repair, and now it is normal, but the engine is shaking, and the tachometer is stable.

Hello dear, the revs are stable, but the reason for the engine shake is carbon deposits and grease blockage.

What is the body size of the Trumpchi GS3? What is the body size of the GS3? The Trumpchi GS3 measures 4,350 mm in length, 1,825 mm in width, 1,655 mm in height and has a wheelbase of 2,560 mm.

The Trumpchi GS3 is equipped with a liter naturally aspirated engine and a liter turbocharged engine type; In terms of suspension, the front suspension uses a MacPherson independent suspension, and the rear suspension uses a torsion beam non-independent suspension. The liter naturally aspirated engine has a maximum power of 84 kW, a maximum torque of 150 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4500 rpm. The turbocharged engine has a maximum power of 120 kW and a maximum torque of 235 Nm, a maximum power of 5,500 rpm and a maximum torque of 1,500 to 4,000 rpm.

The length, width and height of this car are 4350 mm, 1825 mm, 1655 mm, and the wheelbase is 2560 mm.

Liter naturally aspirated engine with a maximum power of 84 kW and a maximum torque of 150 Nm. The engine is equipped with multi-point injection technology, using an aluminum alloy cylinder head and a cast iron cylinder block. This engine can output maximum power at 6000 rpm and maximum torque at 4500 rpm.

The engine is mated to either a 5-speed manual transmission or a 6-speed automatic manual transmission. The turbocharged mould engine has a maximum power of 120 kW and a maximum torque of 235 Nm. The engine is equipped with direct injection technology and features an aluminium alloy cylinder head and cast iron block.

The engine delivers maximum power at 5,500 rpm and maximum torque at 1,500 to 4,000 rpm. The engine is mated to either a six-speed manual transmission or a seven-speed dual-clutch transmission. The front suspension of this car is MacPherson-style independent suspension, and the rear suspension is torsional beam-type non-independent suspension.

The driving quality of this car is good, and the design is also very good. Many domestic consumers have bought Trumpchi's SUV models, and Trumpchi's SUV is very cost-effective.

Summary. The chassis of this car, his replacement price is still relatively high, and there are more accessories on his chassis, that is, for example, the left front chassis, he now has this lower limb arm shock absorber, and this balance bar, pull rod, ball head and shock absorber, upper seat, and this half-shaft ball cage bearing. All belong to these accessories on the chassis, if you say that the chassis on the left is replaced separately.

This replacement will cost at least more than 2,000 yuan. Replacing it in an outside repair shop also requires at least more than 1,800 yuan, which is more expensive.

GAC Trumpchi GA3S chassis is more expensive.

Hello, happy to answer your questions.

Hello, happy to answer your questions.

GAC Trumpchi GA3S chassis is more expensive.

The chassis of this car, his replacement price is still relatively high, and there are more accessories on his chassis, that is, for example, the left front chassis, he now has this lower limb arm shock absorber, and this balance bar, pull rod, ball head and shock absorber, upper seat, and this half-shaft ball cage bearing. All belong to these accessories on the chassis, if you say that the chassis on the left is replaced separately. This replacement will cost at least more than 2,000 yuan.

Replacing it in an outside repair shop also requires at least more than 1,800 yuan, which is more expensive.

See. Which front bumper.

The front bumper replacement of the original parts of the working hours includes the material cost of about 2100 yuan, and the replacement of the labor hours in the repair shop outside, including the material cost of more than 1300 yuan, the main part of the bumper is more expensive, this is the need to do insurance, and the price of the whole painting is also relatively high.

What about the engine. This engine is more expensive, and an original brand new engine assembly costs more than 23,000 yuan.