How to replace the battery of the Guangqi GA3 remote control key

The remote control key does not have an electric battery replacement, you only need to use the mechanical key that comes with the remote control to open the battery cover plate of the remote control to replace the battery, the specific operation steps are as follows:

1. Forcefully unplug the mechanical key part of the remote control key.

2. Find the operation hole of the battery cover of the remote control.

3. Use the mechanical key of the remote control to pry this operation hole.

4. Remove the battery cover.

5. Replace the internal button battery.

6. Close the battery cover.

7. Insert back the mechanical key of the remote control to complete the operation.

I'll answer] after the remote control key pops up, there is a horizontal stripe in the middle of the groove on the side of the lock, with a screw force lightly, the lock is separated, open it and replace the battery on the line, I went to the car decoration store to buy the battery after they helped install it, it is very easy.

How to replace the battery correctly: 1. Open the button of the remote control key to make the stainless steel key pop out. 2. With the side of the key belt Trumpchi icon facing up, the left index finger and thumb are held on both sides of the key, and the position is in a straight line with the Trumpchi pattern.

That is to say, the index finger - pattern - thumb is dotted into a straight line; At the same time, place the right thumb on the right side of the keychain so that it is symmetrical to the mass pattern dot on the left side in the middle arc, and the right index finger is bent opposite the right thumb. 3. Hold both sides of the key with the left hand, and press down with the thumb of the right hand at the same time to make the arc gap in the middle larger, and pull the two hands outward at the same time, and further increase the gap in the middle while the right side of the key is half downward, then the gap will be further increased, (at this time, it will be very labor-saving to use a knife to separate in the middle of the gap) until the key is divided into two parts, and half of the mass pattern will no longer be decomposed at this time. 4. Break the half without the mass pattern from the gap in the middle, and you will see the rubber strip in the middle of the two parts, which is used to prevent dust from entering.

5. Pry open the round battery with a knife.

The wind and water are cold, and the frost is miserable.

1. Turn the car key over first, there is a small switch inside the back, and pull it up;

2. Press and hold the buckle with one hand, grab the top with the other hand and pull it out, you can pull out the internal mechanical key;

3. Turn the car key sideways, there is a gap on the side, and pry it open along the gap with a knife;

4. After opening the car key cover, there is a round rubber pad in the upper part;

5. Open the round buckle, you can see the button battery inside, and put the button battery to be replaced;

6. Then put the rubber pad of the button battery back and cover the car key cover;

7. Finally, we insert back the mechanical key, and the battery replacement of the GAC Trumpchi GA3S car key is completed.

There are two kinds of Trumpchi GS3 keys, which are equipped with a start switch and equipped with an ignition switch, and the steps to replace the battery are as follows:

1. Equipped with a start switch model key: dial the switch along the direction of arrow A, and pull out the emergency mechanical key along the direction of arrow B. Ignition switch equipped with model key: press the button arrow and the mechanical key will pop up.

2. Use a micro flathead screwdriver to pry open the remote key shell at the arrow position.

3. Press the battery with your finger in the direction of the arrow and take out the key fob.

The remote control key can be divided into three categories according to its use method: active working mode, passive working mode and coil sensing mode

1, the active working mode, the principle is through the body electronic module (ECU, electronicControlUnit) and the body control module (BCM, bodyControlManagement) to control the door, just press the key button to send the unlocking and locking command, through the body electronic module verification, can open and close the door.

2. The coil induction working mode mainly determines whether the engine can be started by placing the encrypted chip in the key, and verifying whether the key matches through the RF transceiver of the body in the process of unlocking. It is mainly used for special situations when the key is out of power, and the car can still start normally.

3. The passive working mode is that when the owner enters the induction area of the key system, as long as the hand touches the door handle, the identification key it carries will receive the low-frequency signal sent by the car, and if this signal is consistent with the identification information saved in the key, the key will be awakened.

When the key is awakened, it analyzes the authentication password issued by the car and sends corresponding signals, which are encrypted for added security. The car compares the received signal with the information stored inside the car, and if the verification is successful, the car unlocks the door.

The remote key does not have a battery swap, you only need to use the mechanical key that comes with the remote control to open the battery cover of the remote control to replace the batteryThe specific steps are as follows:

1. Forcefully unplug the mechanical key part of the remote control key.

2. Find the operation hole of the battery cover of the remote control.

3. Use the mechanical key of the remote control to pry this operation hole.

4. Remove the battery cover.

5. Replace the internal button battery.

6. Close the battery cover.

7. Insert back the mechanical key of the remote control to complete the operation.

1 do not dismantle yourself, 2Go to the nearby auto parts city and auto parts market or the car key store and ask the staff to help you deal with it.

Disassemble the key, and there is a battery as big as a five-cent coin in the middle of the computer version, and the cost is about 5 yuan for a battery.

The style and landlord changed rooms very much.

1. Turn the car key over first, there is a small switch inside the back, and pull it up;

2. Press and hold the buckle with one hand, grab the top with the other hand and pull it out, you can pull out the internal mechanical key and seep out of the shirt;

3. Turn the car key sideways, there is a gap on the side, and pry it open along the gap with a knife;

4. After opening the car key cover, there is a round rubber or ridge pad in the upper part;

5. Open the round buckle and you can see the button battery inside.

Insert the coin cell battery to be replaced;

6. Then put the rubber pad of the button battery back and cover the car key cover;

7. Finally, we inserted back the mechanical key, GAC Trumpchi mold file.

The GA3S car key battery swap is complete.

Summary. 1. We turn the car key upside down, and we can see the small switch on the back;

2. While pressing the switch, pull out the mechanical key upward;

3. Then use the mechanical key to pry the car key cover on the head, so that the two halves are separated;

4. After separation, it becomes as follows, half of it is the battery, half of it is the circuit board, remove the battery;

5. Put the prepared battery into it and cover the lid back;

6. Finally, we completed the replacement of the car key battery.

How to change the battery of 13 Trumpchi GS5 keys.

Hello, happy to serve you!

1. We turn the car key upside down, and we can see the small cleaning switch on the back; 2. While pressing the switch, pull out the mechanical key upward; 3. Then use the mechanical key to pry the car key cover on the head, so that the two halves are separated; 4. After separation, it becomes as follows, half of it is the electric hidden sail pool, half is the circuit board, and the battery is removed; 5. Put the prepared battery into it and cover the lid back; 6. Finally, we completed the replacement of the car key battery. Hail.

Step 1: There is a very small button on the side of the tail cap of the key, first we press this button, and then pull out its key tongue.

Step 2: Push the hat on the tail of the key (the chrome silver) firmly up in the direction of the side.

Step 3: Break open the key box or use a screwdriver, as simple as breaking along the center line, there is a slot in it that can be broken.

Step 4: Move the screwdriver or coin along the gap to the sides, gradually widening the gap.

Step 6 of <>: Go outside or buy the same battery online, the model is a 3V button battery, and the jujube is very cheap, and then replace and install it, pay attention to the positive and negative electrodes of the button battery.

Step 7: The protruding clip can slide the battery from one side to the other and take it out.

Summary. Hello, the GAC Trumpchi GS3 key is in the car, and the way to open the door is as follows.

First, you can find a lock-picking company. Second, you can break the smallest glass, and after opening the door, let the insurance company replace it with a new one. Third, use an air cushion to open the top of the front door, and use the wire to open the inner lock switch.

Fourth, find a maintenance shop, remove the fender lining from the left front wheel, find the unlocking line, and automatically open the door and lock it with iron.

Hope mine can help you.

How to open the GAC Trumpchi GS3 key in the car.

Hold on. How to fix it.

Hello, GAC Trumpchi GS3 key check key in the car, and the way to open the door is as follows. First, you can find a lock-picking company. Second, it can break the smallest glass, open the door and bend endlessly, so that the insurance company can replace it with a new one.

Third, use an air cushion to open the top of the front door, and use the wire to open the inner lock switch. Fourth, find a maintenance shop, remove the fender lining from the left front wheel, find the unlocking line, and open the door lock with the iron in a self-buried posture. Hope mine can help you.

The specific operation steps for changing the battery of the GAC Trumpchi car key are as follows:

1. Press the mechanical key separation button of the remote control.

2. Forcefully unplug the mechanical key of the remote control.

3. Use a flat screwdriver to pry open the gap in the housing of the remote control.

4. Gently break open the shell and skin of the remote control Ran's old nuclear brightener.

5. Change the button battery inside the remote control.

6. Install the remote control back in reverse order to complete the operation.

Summary. Dear, the maintenance cycle of Trumpchi cars is 5000 kilometers, which can also be counted as half a year. That is, every 5,000 kilometers or half a year, whichever comes first, every two years or 40,000 kilometers to change the brake fluid.

The replacement cycle of synthetic oil is generally about 10,000 kilometers, mineral oil can be changed once every 5,000 kilometers, and semi-synthetic engine oil can be changed every 7,500 kilometers or 8 months. The functions of engine oil are: lubrication and wear reduction, cleaning and dispersion, cooling and cooling, sealing and leakage prevention, corrosion prevention and shock absorption and cushioning.

The importance of car maintenance can ensure that the vehicle is in an excellent performance state, and can be out of the car at any time, without worrying about the technical state of the vehicle; It can effectively improve the efficiency of the vehicle and reduce the consumption of engine oil, its parts and tires.

Hello, the method of replacing the battery of the M8 key of the Trumpchi car: 1. Pull the mechanical key out of the key first according to the arrow prompts; 2. Open the key shell along the gap on the side of the remote control key, and you will be able to dig out and see the battery compartment inside; 3. Take out the battery inside, and then replace the new battery according to the direction of the positive and negative electrodes.

Dear, the maintenance cycle of Trumpchi cars is 5000 kilometers, which can also be counted as half a year. That is, every 5,000 kilometers or half a year, whichever comes first, every two years, the rubber finger or 40,000 kilometers to change the brake fluid, etc. The replacement cycle of synthetic oil is generally about 10,000 kilometers, mineral oil can be changed once every 5,000 kilometers, and semi-synthetic engine oil can be changed every 7,500 kilometers or 8 months.

The functions of engine oil are: lubrication and wear reduction, cleaning and dispersion, cooling and cooling, sealing and leakage prevention, corrosion prevention and shock absorption and cushioning. The importance of car maintenance can ensure that the vehicle is in an excellent performance state, and it can be out of the car at any time, without worrying about the technical state of the vehicle; It can effectively improve the efficiency of the vehicle and reduce the consumption of engine oil and its zero-beam source components and tires.

The remote control key does not have an electric battery replacement, you only need to use the mechanical key that comes with the remote control to open the battery cover plate of the remote control to replace the battery, the specific operation steps are as follows:

1. Forcefully unplug the mechanical key part of the remote control key.

2. Find the operation hole of the battery cover of the remote control.

3. Use the mechanical key of the remote control to pry this operation hole.

4. Remove the battery cover.

5. Replace the internal button battery.

6. Close the battery cover.

7. Insert back the mechanical key of the remote control to complete the operation.