Do you think there are any things you need to pay attention to in winter decoration?

Turning on the heating can cause dehydration of the wood, and in the dry winter weather, the wood products are prone to "distortion" and deformation due to "dehydration". All wood materials should be placed indoors for three to five days before installation to allow them to adapt to the indoor humidity, and wait for their moisture content to be close to the indoor level before installation, so as to avoid future wood deformation to the greatest extent.

Precautions for decoration in northern winter, cement mortar is easy to freeze, and the low temperature in winter will make the cement mortar harden quickly, but this is not solidified, but frozen, when the ice in the cement mortar melts, the cohesion of the cement mortar will decrease, and it is easy to fall off. Normally, a room temperature above 0 will not have a significant effect on the tiling, so try to mix the cement mortar when the temperature is high. It is understood that some decoration companies will add antifreeze to the cement mortar according to the situation during winter construction.

At the same time, due to the low temperature outside, whether it is wall tiles or floor tiles, they should be placed for at least 1 day after moving from the outdoors to the indoor before paving, so that they can reach a certain balance with the indoor temperature before they can be paved, so as to avoid falling off. ‍‍

In winter, the paint spray work is not affected. In general, it is not possible to apply paint when the temperature is below -5. In the north, every home is heated in winter, and the indoor temperature is suitable, so the owner does not have to worry about the quality of the painting work.

However, the wind and sand in winter are large, and the paint and paint are easy to adhere to dust when they are not dry, so the owner should pay attention to choosing windless weather for workers to carry out painting construction, so as not to affect the quality of construction.

Winter is not suitable for decoration, first of all, the floor tiles are easy to freeze, scraping putty is not easy to dry to crack in summer, it is best to decorate in spring!

We are a house that was renovated in winter, and as the temperature drops in winter, it is now slowly entering the autumn and winter season. In the autumn and winter months of interior wall latex paint construction, there will be some different construction environment characteristics, the temperature is low, the indoor humidity is high, the temperature in winter is low, the indoor humidity is high, resulting in slow drying of the paint film, slow film formation, easy to peel, poor ventilation in winter, often closed doors and windows during construction, resulting in poor ventilation, so that a small amount of odor becomes an abnormal odor. Moreover, the temperature is low in winter, and the odor is emitted slowly, so the ventilation time should be appropriately extended. ‍‍

In the process of masonry construction, such as sticking tiles, pay attention to the hollowing phenomenon, if the weather is frosty, or when the temperature is low, it is best to add antifreeze at the level. Be sure to dry thoroughly after leveling and allow plenty of time. ‍‍

When the temperature drops, the cement is easy to freeze, and the ice inside will affect the stickiness, causing the tiles to fall in the later stage. At low temperatures, brushing walls and tiles is not easy to dry out, easy to freeze, and there will be dry cracks and other phenomena. The room temperature of tiling is not less than 0, and the room temperature of the wall is not less than 5, which can provide heating measures for reconstruction. ‍‍

The paint dries relatively slowly, especially in the north in winter, the temperature is low, the sun is weak, the paint on the wall is not easy to dry, and it is easy to appear as thin as a hair crack in the future. After the previous step is completed, it must be dried before entering the next step, otherwise the wall will crack and bulge in the future. In winter, the ambient temperature of the paint is usually required to be above 5 degrees, so it is advisable to carry out the wall painting operation between 10 am and 4 pm, and minimize the number of window openings during the construction process to avoid the paint freezing or excessive air drying. ‍‍

In winter, the temperature is low, the ventilation time is short, and the indoor harmful gases are not easy to volatilize, so ventilation should be done for a long time to avoid indoor air pollution. It can be ventilated at noon when the air temperature is high, the time is about two hours, and the window is half open to prevent the ventilation time from being long, and the water evaporates, causing the wall to crack. ‍‍

The moisture content of wood in winter is lower than that in summer, and it is easy to absorb water and expand in summer, and deformation occurs. Note that the wood should not be placed near the heat source to prevent deformation by heating, and a basin of water should be placed near the heat source to increase air humidity and prevent wood cracking caused by drying.

What are the precautions for winter decoration?

1. The temperature of the construction environment is the most important.

Painters should apply all kinds of paints in strict accordance with the temperature in the product instructions. Under normal circumstances, the ambient temperature of paint application should not be lower than 5; Among them, the ambient temperature of the commonly used mixed color paint should be above 0, and the ambient temperature of the varnish should not be lower than 8. The painter's work should pay more attention to "keeping warm", and then open the doors and windows for ventilation after they are fully dry.

Also, be careful not to let the sand particles fall on undried painted surfaces.

2. Leave the scene and turn off the faucet.

Winter hydropower workers should also pay attention to waterproofing, some new residential residents before construction, let the property department turn off the main valve of the water, after the decoration, but forget to turn off the faucet, if the property opens the valve, there is no one at home, it will cause flooding. In addition, if the hose used is an inferior product during the renovation, it is also easy to run water.

3. The construction site should be equipped with fire extinguishers as much as possible.

Be careful not to use fire in the room being renovated in winter. Electric heating equipment, gas canisters for cooking, and blowtorches for waterproofing should be used with caution, and fire extinguishers must be placed on site.

4. Oil sealing treatment to prevent wind cracking.

The purchased materials should not be stored in the open air, and the materials should be brushed with a layer of clear oil on the surface after being transported to the construction site, also known as oil sealing treatment, to prevent wind cracking and deformation. After the decorative panel is transported to the site, it should be flattened, and the responsible practice is to pad a large core board at the bottom of the decorative panel, and then press a large core board on it, so that the plate can be kept flat, otherwise, the panel will crack and warp.

5. Pay attention to the time and amplitude of window opening.

Paste putty or wallpaper on the top of the wall, dry it naturally, and do not open doors and windows to prevent rapid water loss and affect construction and deformation. The time to open the window for ventilation is also particular: it is best to choose between 10 a.m. and 4 p.m., when the temperature is relatively high to prevent the newly brushed putty from freezing.

If there are large holes or depressions in the wall, it is best to use gypsum powder and latex to adjust and flatten the wall. When there are large cracks on the wall, the local place is double-pasted kraft paper and then brushed putty, and when the area is large, it is best to paste the cloth and then brush the putty, so as to ensure that the wall is smooth and not cracked.

6. Coatings and glues release formaldehyde, benzene and other substances.

In winter, the climate is cold, and when we are constructing, we are used to closing doors and windows, which is very easy to cause indoor air pollution poisoning. In particular, during the decoration process, there will be a large number of formaldehyde and benzene substances harmful to the human body in the air when painting the waterproof layer, gluing tiles and flooring with adhesive products, and brushing the wall cabinet with paint. These substances can only be volatilized by opening windows for ventilation, otherwise they will be deposited in the indoor air and the concentration will increase.

Therefore, in the process of our decoration, we must pay attention to opening the windows for ventilation for the owners.

Hope it helps!

It's not winter now, it's time to decorate, and the big renovation companies have already started.

A complete guide to winter decoration.

In people's inherent belief, construction is not suitable in winter. Therefore, every winter, most families who are anxious to move out as soon as possible are anxious for the cold winter to pass as soon as possible and decorate their new homes in the spring of the next year. The great opportunity for decoration was wasted in this way, and in fact, winter is the best season for decoration.

What are the steps for winter renovation? A: In three steps!

Step 1: Design and material preparation phase.

Step 2: Construction Phase.

Step 3: After the renovation is completed.

Four suggestions for home renovation in winter.

Suggestion 1: Strictly control the room temperature.

Tip 2: Use antifreeze with caution.

Suggestion 3: Decoration materials do not have to be "heated".

Suggestion 4: Pay attention to construction safety.

There are several issues that need to be paid attention to in winter decoration of the home.

In winter, attention should be paid to leaving appropriate gaps.

13 notes can not be missing.

Winter decoration: ask for cheap and good quality from home decoration.

Winter is not suitable for decoration, mainly because the cement is not good, the strength of the water pipe is frozen and cracked, and so on.