How to take out the dust filter from the Midea air conditioner

How to remove the dust filter from the Midea air conditioner:

First of all, unplug the power supply, grab both ends of the panel and pull it out slightly, open it at an angle of about 75 degrees, pinch the hinges at both ends with both hands and gently remove the panel and push it outward, and lift it up at the same time.

Hang up and remove the filter screen cleaning steps: first unplug the plug, open the indoor unit panel, there are two recesses on both sides of the indoor unit, and force it out at the recess to open it, and then lift the indoor unit panel up to a certain angle (about 60 °), which can be fixed in this position, and then take out the filter screen, be careful when taking the filter screen, and do not forcibly disassemble and wash it according to the disassembly order, which will cause damage to the air conditioner. Then rinse with water, remember not to use a brush, put it in a cool place to dry, and put it on when it is completely dry!

You can flip through the manual to guide the operation!

If there are fixing screws on the cabinet inlet grille (i.e., both sides of the cabinet air conditioner), it can be opened after screwing; If there are no screws, they are magnetically attached and require a little force to open. Grab the gap in the upper left corner of the panel with your hand, and break it outward with a little force, you can open the panel, and after the inlet grille is opened, you can see the position of the filter, and the side air inlet filter is at the inlet and outlet position. There are also differences in the way different models of air conditioners are disassembled, and it is recommended that users check the instructions for details.

Or call Midea's after-sales service**4008899315 let it deal with it!

If you still have questions, you are welcome to ask questions to the company in the United States; I wish you a smooth work and a happy life!

If it is a cabinet machine, break it from both sides of the panel and pull out the filter for cleaning, if it is a cabinet machine, break it from both sides of the lower half of the panel of the cabinet machine, and pull out the filter screen from both sides for cleaning.

<> Midea hanging decoration machine air conditioner dust screen is also called filter, after cleaning, you want to install it back: 1. Open the air conditioner shell, usually there are two small card slots stuck, and gently pull the outer cover outward. 2. After opening the outer cover, open the two buckles inside and open the outer cover completely.

3. Gently lower the filter along the card slot.

1. Remove the dust filter according to the manual, and pay attention not to touch the metal part of the indoor unit when disassembling to prevent it from being scratched;

2. After removing the air filter, gently pat or use an electric vacuum cleaner to remove the dust. If the dust filter accumulates too much dust, it can be rinsed with water or dipped in neutral detergent with a soft brush, but the water temperature should not exceed 50 or more during cleaning, and washing powder, dish soap, gasoline, banana water, etc. cannot be used to avoid the deformation of the dust filter. After rinsing with clean water, wipe it dry with a soft cloth or put it in a cool place to dry, and do not expose it to the sun or dry it in an open flame such as a stove to avoid deformation of the dust filter;

3. Do not use a sponge to clean, otherwise the cover hole will damage the surface of the dust filter screen. To clean the panel, gently wipe with a soft cloth dampened with warm water or mild detergent, then dry with a dry, soft cloth.

The front panel of the indoor unit is opened on both sides of the front panel and upwards by force, and you can see that the two nylon nets are taken down with water and washed and dried, and installed as they are: the cabinet machine generally has one or two screws to fix the lower panel, and the lower panel is opened by removing the screws, and there is a large piece of nylon mesh to clean the lower panel. The air conditioner cover is to protect the air conditioner shell during the season when the air conditioner is not in use, slowing down the rust and oxidation of the shell.

It can play a good role in the maintenance of the air conditioner. The beautiful air conditioner cover is also a good helper for home decoration.

The indoor unit of the air conditioner cover can not only prevent the aging of the air conditioner shell and the dust of the chassis, but also play a decorative role. There are filters and aluminum flakes in the indoor body of the air conditioner, which are not covered for a long time, and dust will enter, which will lead to poor cooling and heating effect of the air conditioner.

The outdoor unit of the air conditioner hangs outdoors for a long time, and is exposed to the sun and rain, wind and dust erosion, and is very easy to rust and dust blockage, which seriously affects the normal service life of the air conditioner. If the protection is poor, dust will also enter, and the aluminum sheet inside the exhaust or the motor and the external unit, the aluminum sheet behind it will also cause poor heat dissipation, and the shell is easy to corrode. The outdoor unit air conditioning cover is produced to protect the outdoor unit of the air conditioner and cover the outdoor unit of the air conditioner, beautify the residential real estate and beautify the appearance of the building.

First, use both hands to pull up the lower part of the face of the indoor unit, so that the filter can be seen, take it out from underneath and take it to tap water, rinse it and dry it, and then install it. (Pretending to be the opposite of this process).

That is, there is a shallow groove on the left and right sides of the panel, pull it open with a little force by hand, and then pull it up moderately to see the filter, lift the filter screen moderately up and leave the card slot, and then pull down to remove the filter.

There is a groove on both sides of the hang-up air conditioner panel, which is very shallow, and you can pull it outward with both hands.

1. Before cleaning the filter of the Midea air conditioner, the power supply should be cut off first, and then the Midea air conditioner panel should be opened and the filter screen should be taken out. Use a brush-type vacuum cleaner to remove dust from the filter and rinse the filter with clean water. If there is any residual oil stain on the filter screen, you can wash it with soapy water, rinse it with clean water and let it dry.

2. When cleaning the filter screen of Midea air conditioner, you must not use hot water with a temperature higher than 40 degrees Celsius, and you must use dish soap and laundry detergent to protect the banana water for cleaning, otherwise the filter screen is prone to deformation.

3. After rinsing the filter with clean water, it needs to be wiped clean with a soft towel and placed in a cool environment to dry, never put it in the sun or open flame to dry, which is easy to deform the filter screen. After the filter is dried, after the filter is installed, you need to wait for three to five minutes when plugged in, and adjust the temperature to the lowest before you can turn on the Midea air conditioner.