What to do if the refrigerator refrigeration drain hole freezes

1.What to do if the fridge freezer drain hole freezes freezing?

1.When the drain hole in your refrigerator freezer freezes over, you can pour a small amount of hot water on the ice to melt the ice, or use the hot air of a hair dryer to blow the ice.

2.After de-icing, you can fill the drain hole with water to see if the drain hole is blocked. If it is not blocked, it can be used normally. If it is blocked, it can be passed through the hole with a thin wire.

3.The distribution of the cold room is hot at the top and cold at the bottom. Water droplets in the refrigerator will condense on the inner wall of the refrigerator and then flow from the top to the front, because the drainage hole in the refrigerator is generally behind the lower layer of the ice storage chamber.

The water* from the drain holes will eventually flow to the water tray of the compressor, which will evaporate the water when the compressor is working.

4.The refrigerator works intermittently. When the refrigerator is in an environment with heavy water vapor, if the refrigerator is opened and closed frequently, the water in the drain hole will not have time to be discharged, and then the refrigerator will freeze during operation, that is, the phenomenon of freezing.

5.When the drain hole freezes, it will be clogged if it is not treated in time, and the refrigerator is still in the start-stop cycle, so more and more water will form, more and more ice, and the final de-icing work will be troublesome.

First cut off the power and shut down, and when the ice of the drain pipe can be dredged up and down, seal the bottom of the drain pipe, and then pour the press refrigeration oil or engine oil into the drain pipe, and store it in for about 20 minutes or more after it is full, and then open the bottom of the drain pipe to release the refrigeration oil. Because water is insoluble in oil, there is generally no water stored in the drain pipe, even if the temperature is cold, of course, there will be no water to freeze, and the oil will not freeze in the drainage hole.

1. For the placement of the refrigerator, be sure to reserve enough space, especially on both sides of the refrigerator to leave a distance of five to ten centimeters, leave ten centimeters at the top, and ten centimeters at the back, so that the refrigerator can be fully dissipated. In addition, it is best to have a vent around the perimeter of the refrigerator, and of course, it is best to have a vent at close range that can form a backflow so that the heat of the refrigerator can be dissipated.

2. Because the power consumption of the refrigerator is relatively large, it is best not to use it together with other household appliances, otherwise it will not only increase the circuit load, but also increase the power consumption of the refrigerator due to the heat emitted by other household appliances. In addition, we must pay attention to keep away from heat sources and avoid exposure to the sun, which will also seriously affect the load capacity of the refrigerator.

3. When using it at ordinary times, raw and cooked mistakes should be separated and not mixed to maintain hygiene, make reasonable use of the space in the box, and do not put the food directly on the surface of the evaporator in the refrigerator to avoid freezing and inconvenience to take out.

In the process of using a household refrigerator, if it is not used properly, then there is a possibility of ice formation. If the fridge leak freezes, it may be due to a blockage.

1. If the freeze in the refrigerator drain hole is caused by blockage, then de-icing can solve it after solving the blockage.

2. If the fruit is frozen due to insufficient foaming, first unplug the power supply of the refrigerator, find a thicker copper core wire, insert one end into the drainage hole, and wrap it around the high-pressure pipe at the other end, so that the temperature of the high-pressure pipe can be transmitted to the drainage hole, and the freezing is solved.

1. There is stagnant water inside the refrigerator, and the water is not drained in time. This phenomenon usually appears on the bottom plate of the refrigerator crisper. And the temperature in this position is very low, which causes the water outlet hole of the refrigerator to freeze, and after a long time, the drainage hole is blocked.

2. It may be that the temperature in our refrigerator is set too low. For example, if we set the temperature setting to the maximum in the summer, then the temperature will be very low. In this case, the inside of the refrigerator will freeze if there is not a small amount of water.

In particular, the location of the drain of our refrigerator is the lowest, so it is more likely to freeze.

3. The blockage of the drainage hole causes the water to flow out and the early high finger freezes. In other words, there is a blockage inside our drain hole itself. For example, the residue of food in the refrigerator enters the discharge hole, which makes it impossible to drain the water in time.

This can lead to freezing over time, which can lead to the drainage being blocked.

1. The icing of the drainage hole is generally caused by blockage or insufficient foaming, which should be solved according to the specific situation.

2. If it is icing caused by insufficient foaming, first unplug the power supply of the refrigerator, find a thicker copper core wire, insert one end into the drainage hole, and wrap it around the high-pressure pipe at the other end, so that the temperature of the high-pressure pipe can be transmitted to the drainage hole, and the icing will be solved.

If the refrigeration is normal, the most likely possibility of the drainage hole is blocked, the drainage is not smooth and the ice cube is formed, when the refrigeration stops, the ice cube melts, and the ice cube is not completely melted The refrigeration starts to work again, so that the ice cube is always there.

1. What should I do if the drain hole in the refrigerator freezes.

1. When the drainage hole of the refrigerator freezes, you can pour a small amount of hot water on the ice to melt the ice, or use the hot air of a hair dryer to blow the ice.

2. After removing the ice, you can pour some water into the drainage hole to see if the drainage hole is blocked.

3. The distribution of the refrigerator is hot and cold, and the water droplets in the refrigerator will condense on the inner wall of the refrigerator, and then flow from the top to the front, because the drainage hole of the refrigerator is generally behind the lower layer of the ice storage room, and the water of the drainage hole will eventually flow to the water tray of the compressor, and the water will evaporate when the compressor works.

4. The work of the refrigerator is intermittent, when the environment in which the refrigerator is located is heavy in terms of water vapor, if the refrigerator is often turned on and off, the water in the drainage hole will not have time to be discharged, and the refrigerator will be frozen when it is running, that is, the phenomenon of freezing.

5. When the drainage hole freezes, if it is not dealt with in time, it will be blocked, and the refrigerator is still in the cycle of starting and stopping, there will be more and more water, and the ice will freeze more and more, and the final de-icing work will be very troublesome.

Second, the water in the drainage hole of the refrigerator refrigerator is drained to **.

1. The water from the drain hole in the refrigerator will eventually be discharged to the water tray of the compressor, and when the compressor generates heat, the water on the water tray will evaporate without special treatment.

2. In the hot and humid summer, the refrigerator will run for a long time, and there may be more water droplets, so every time you open the refrigerator to take food, you can use a rag to wipe the water flowing down to avoid freezing in the drainage hole hall socks.

3. There is a lot of water in the refrigerator, which may be because there is too much food in the refrigerator, and the refrigerator needs to work often to maintain the temperature in the refrigerator, or it may be that the food that is too high temperature is put directly into the refrigerator, which will also cause too much water in the refrigerator.

4. The size of the space in each refrigerator is different, don't stuff too much food into the refrigerator, just put the right amount of food. In addition, if the temperature of the food is too high, it should be cooled before putting it in the refrigerator, which can prolong the life of the refrigerator.

5. In addition to the drainage hole in the refrigerator room, there is also a water leakage, which is used to drain the excess water in the refrigerator.