What are the circlip clamp models, what are the circlip specifications and models?

How to choose the model of the circlip pliers:

Applicable circlip diameter: 10 25mm, suitable ear holes: 0mmV-MP80, V-MP81, V-MP82, V-MP83, V-MP80S

Applicable circlip diameter:

10 25mm, suitable ear piercing: 0mm

v-mp170,v-mp171,v-mp172,v-mp173,v-mp520,v-mp521,v-mp522,v-mp523

Applicable circlip diameter:

6 20mm, suitable for ear piercing: c8~

v-mp170f,v-mp171f,v-mp172f,v-mp173f

Applicable circlip diameter: 12-65mm, suitable ear holes: 5mmV-MP175, V-MP176, V-MP177, V-MP178

I know that the circlip pliers of Baita imported tools can be divided into internal circlip pliers and external circlip pliers, and the internal and external circlip pliers are provided with right-angle type, 45° bent nose type and 90° bent nose type. At the same time, there is also a straight-mouthed, internal and external circlip pliers, you can choose the best one for you.

The inner card measures the inner hole, and the outer card measures the outer diameter.

CirclipThe national standard specification is every 5 mm carry, less than 20 mm every 1 mm carry.

It can be calculated according to the inner diameter of the outer circlip, minus millimeters is the specification of the circlip or the diameter of the shaft, and the outer diameter of the inner circlip, plus millimeters is the specification of the circlip or the diameter of the hole. The commonly used circlip standards are as follows:

Retaining rings for bore A standard: GB T 893-186.

Retaining ring standard for shaft: GB T894-2017.

Retaining ring standard for heavy-duty holes: JB ZQ4341-97.

Heavy-duty shaft retaining ring standard: JB ZQ4342-97.

A circlip is a small device component that is generally very small. The shape of the circlip is generally round, but it has a notch at one end. Put the circlip dust on the equipment that needs to be fixed, and then lock the notch with screws, so that the equipment can be kept stable, which is the role of the circlip.

in CNC lathes.

Commonly used spindle circlip as a fixture for clamping parts, due to the good structure and accuracy of spindle circlip, it is widely used in the manufacturing field. However, in the specific production process, the circlip lacks an axial direction.

The positioning of the sail collapse device can only rely on the end face of the circlip and a specific tool for positioning.

1. Model: V-MP80, V-MP81, V-MP82, V-MP83, V-MP80S, applicable circlip diameter 10-25mm, suitable ear piercing:.

2. Model: V-MP170, V-MP171, V-MP172, V-MP173, V-MP520, V-MP521, V-MP522, V-MP523, applicable circlip diameter: 10-25mm, suitable ear holes:

3. Model: V-MP170F, V-MP171F, V-MP172F, V-MP173F, applicable circlip diameter: 6-20mm, suitable ear piercing:.

4. Model: V-MP175, V-MP176, V-MP177, V-MP17, applicable circlip diameter: 12-65mm, suitable ear hole: .

Precautions for the use of circlip pliers.

There are many kinds of circlip pliers, and the role of each one will be very different due to the different shapes of the jaws, so it is necessary to choose according to the needs in actual use.

Hole circlip pliers should be selected according to the position of the ring when used, the more suitable the tool will be better, so when choosing, it is necessary to choose according to the need, the work will be more practical, and the progress of the work will be greater. When using circlip pliers for holes, the requirements for the jaws are very high, and the jaws come in many forms.

Of course, such a tool is also made of a combination of metal and plastic, and the metal jaws will be more durable, and the strength will be higher, and the force will be better when used, and the work efficiency will be higher.

The above content refers to Encyclopedia - Circlip pliers.

Kashen Spring. The national standard specification is every 5 mm carry, less than 20 mm every 1 mm carry.

It can be calculated according to the inner diameter of the outer circlip, minus the millimeter is the specification of the calibury spring or the diameter of the shaft, and the outer diameter of the inner circlip, plus millimeter is the specification of the circlip or the diameter of the hole. The commonly used circlip standards are as follows:

Retaining rings for bore A standard: GB T 893-186.

Retaining ring standard for shaft: GB T894-2017.

Retaining ring standard for heavy-duty holes: JB ZQ4341-97.

Heavy-duty shaft retaining ring standard: JB ZQ4342-97.

Circlips are a kind of elastic mechanical parts widely used in mechanical and electronic equipment, which can play the role of fixing, connecting, and adjusting positions, so they play a vital role in industrial production. When choosing a circlip, you need to consider factors such as its specifications and model size.

The specifications of circlips are generally classified according to the use scenario, applicable equipment, material and other factors, and the common ones are mechanical circlip, electronic circlip, spring circlip and so on. When using it, you need to select the appropriate specifications according to the specific scenario.

The model size of the circlip is also one of the factors that need to be considered when using, mainly including thickness, width, length and other dimensional parameters. Different application scenarios need to choose different size parameters, and appropriate size parameters can ensure that the circlip has good elastic performance and load capacity during use.

For example, the size parameters of mechanical card stool springs are generally about 1-50mm in thickness and width and 5-100mm in length, while electronic steam is relatively small, with a general thickness of about 3-50mm in width and a length of about 3-50mm.

In addition to specifications and dimensions, the material is also a factor to consider when choosing a circlip. Common circlip materials include Nianhui spring steel, stainless steel, copper, aluminum, etc., different materials correspond to different elasticity, wear performance and corrosion resistance, and also need to be selected according to the actual use environment.

In short, when choosing a circlip, it is necessary to consider its specifications and size parameters, as well as key factors such as material, to ensure that it has good stability and reliability during use.

Inner circlip: also known as "hole retaining ring", as shown below.

The circlip pliers required are shown below.

The difference between an external circlip for shafts and an inner circlip for holes:

Differences: 1. The installation part of the shaft circlip is on the shaft, while the hole circlip is installed in the round hole.

2. The shaft is fixed by a circlip in the hole direction of the parts, and the hole is controlled by the circlip in the axial motion of the parts.

3. The inner diameter of the shaft circlip is smaller than that of the assembled shaft, and the washer needs to be expanded with a tool to install it on the shaft groove; The outer diameter of the circlip for the hole is generally larger than that of the round hole, and it is also necessary to use a tool to clamp the hole card of the washer, and then put it into the inner groove of the round hole.

Similarities: 1. Materials: The two are made of the same materials, and stainless steel or carbon spring steel is generally used as raw materials in China.

2. Surface treatment: The two are generally used for oxidation treatment and galvanized passivation treatment.