-
Skyworth TV can set the boot signal source,So that when it is turned on, it will automatically start to the set-top box without additional operation。 For example, the cool open system: Specific operation steps:
Step 1:Turn on the TV to enter the home page,Select [My]--TV settings]; Step 2: Go to [System Settings]; Step 3:
Operate the remote control and select [Boot Channel]; Step 4: Control the left and right buttons of the remote control and select the signal source according to your needs and the properties of the external device. The signal of each set-top box is different, if you don't know which one to choose, you can try more.
Once set, turn on the computer again and you will be able to access the source you have set. If you no longer want to see the set-top box, you need to switch the signal source. Press [Home] on the remote control - Mine] and select [Source]; Select a source and switch between sources.
If you have any questions about the use of Kukai TV,You can log in to the Kukai community forum or follow the Kukai community WeChat,Take a look at the rich tutorials、How to deal with common problems and various fresh ways to play introduced by players。
-
Power on"Menu"→"Other settings"→"Boot channel"Select the source item to confirm. When you're done, turn it on next time and set this source as default.
-
Under normal circumstances,I think it's a telecommunications signal,If you want to call up the TV signal,This can,The main thing is to debug it from three aspects,Under normal circumstances,I go to see this cost-effective is still very good。
-
The specific steps are as follows:
1、First of all,Turn on Skyworth TV,As shown in the figure below,Then enter the next step。
2、Secondly,On the Skyworth TV remote control,Press the signal source button,As shown in the figure below,Then enter the next step。
3. Then, at this time, the menu of the source appears on the TV screen, as shown in the image below, and then proceeds to the next step.
4. Then, once the source menu appears, press the down button of the remote control as shown in the image below, and then proceed to the next step.
-
Generally, as long as you switch the **signal remotely,The TV will be remembered as**input state,Every time you turn on in the future, it will directly enter**signal。 Skyworth is no exception, you set it from the menu settings.
-
If the default is the set-top box signal, you can switch to the ** signal through the remote control, or after you connect the ** signal, turn off the power of the set-top box, so that the system will automatically switch to the ** signal after the set-top box signal cannot be found.
-
1、How to call up TV programs in the closed base Skyworth1、Step 1 is to turn on the power switch of the TV,Then click the menu button on the remote control。 1. The second step is to select the Tongtai Zen path through the left and right arrow keys to select this setting, and after clicking to confirm, you can select the **1 option. 3. The third step is to adjust the picture of the TV to the ** screen of the set-top box, and carefully switch the signal source to **1, and then you can call up the TV program.
-
Here's how to set it up:
1. Turn on the TV set and turn it on.
2、On Skyworth's TV remote control,Press the signal source key。
3. At this time, the signal source menu appears on the TV screen.
4. After the Signal Source Qinchun menu appears, press the down button of the remote control.
First of all, steam itself is relatively large and takes up a lot of memory, if youComputer configurationNo, for example, if the memory and hard disk are not good, the boot will be slower, and it is recommended to change to a better oneSolid state drivesso that the start-up is blazing fast. >>>More
Description**Plugging Yuxiang failed to get the permission to load, in the IE pop-up window to make trouble, please allow it. 1. Use 360 to repair IE if it doesn't work, upgrade your Adobe Flash Player 2, re-upgrade, install the built-in ** Windows Media Player and restart the computer. 3. ** Jinshan antivirus, 360 can't kill it. >>>More
It's usually caused by file or disk errors!
Pay attention to which disk self-check, right-click on the inventory, select attributes, and then select the tool first item card, click (Start Check) in the check error to tick both checkboxes. After completion, restart to see if there is a self-test. If you are still self-checking, first scan with MHDD to see if there are any bad sectors, and if there are no bad sectors, follow the following method: >>>More
In fact, this is an introduction to the use of IE9 from IE8 to IE9 and a hint of updating. You just need to click Next as IE says, it won't take you long, and it will allow you to use IE better. If not. >>>More
Try this. Method 1: Enable the ActiveX control execution permission of Internet Explorer 1 >>>More