-
1.Open the "Start Menu" in the lower left corner of Win10 and select [Computer Settings].
2.After entering the computer settings, we click on the [Update and Restore] settings at the bottom of the left side.
3.Then in the win10 update and restore settings, select [Restore].
4.Next, let's click Start under "Delete everything and reinstall Windows".
5.It should be noted here that the image file of the previous installation of win10 is needed here, because the computer was installed with a USB flash drive, the image files are all in the USB flash drive, and the WIN10 factory reset needs to use the files in the copy image, so it will prompt: "Some files are missing".
6.After that, insert the USB flash drive that installed win10 into the computer, and restore the operation again, and then you can see the following "initialization" settings, and then we can click [Next], as shown in the figure below.
ps.If you have the previous win10 system image file in the computer, you don't need to insert the USB flash drive where win10 is installed.
7.Next, you will enter the "Your computer has multiple drives" setting option, there are two options: [Install window drives only] and [All drives], you can choose according to your own situation. Generally, we can select the first item [Install window driver only].
8.There are some other options to choose from, and we can just follow the prompts to select them. Finally, we will enter the [Ready, you can initialize the computer] prompt, we can click [Initialize].
9.Finally, the computer will automatically restart, and after restarting the computer, it will enter the "Resetting the computer (progress percentage prompt)" interface, which will take a long time, and will automatically restart 2 times during this period. If you're a laptop user, it's a good idea to make sure the battery is fully charged or connected to a power adapter.
After waiting for a long period of time,win10 can be successfully restored to factory settings,Finally enter the system settings interface,Here is the same as the initial setting of the newly installed win01,You can enter the new win10 interface after the setting is completed。
end precautions.
-
Because win10 changed the name of this featureto a freshly launched option.
Win10 can no longer find the option to restore Windows in the settings of "Update and Security", there is only one option left to "reset this computer". Move your mouse up, select Windows Defender, and go to Windows Defender Security Center.
There is an added "fresh start" option.
Microsoft has changed the name of "Recovery" and left it here, and the explanation is very clear, using this feature will keep personal files, some Windows settings, and delete some apps (but will keep some apps that Windows thinks OK).
Win10 System Description:
Windows 10 is an operating system developed by Microsoft Corporation (Microsoft) for devices such as computers and tablets.
Windows 10 has been greatly improved in terms of ease of use and security, in addition to the integration of new technologies such as cloud services, smart mobile devices, and natural human-computer interaction, it has also optimized and improved and supported hardware such as solid-state drives, biometrics, and high-resolution screens.
As of July 13, 2021, Windows 10 has been updated to version for official releases and preview versions for versions.
-
1. Click the Start Menu button and select Settings.
2. Select "Update & Security" from the settings.
3. Select "Recover" in the menu, there is a button to go back to win7 in the recovery, click "Start", and then follow the prompts to roll back win10 to the previous operating system.
-
1. Click "System Restore" in the "System Protection" interface.
2. Click Next in the pop-up System Restore prompt.
<>4. Select a restore point first, and double-click to see the programs and drivers that will be affected after the system is restored to that point.
5. If you confirm the restoration to this point, click to select the restore point on the following page, and click Next.
-
<>2.In the System Protection tab, select Create.
3.Enter a description of the restore point, and then select Create> and then OK.
Windows automatically establishes a restore point before each major update is installed, and we also recommend that you manually establish a restore point every month.
Note: If protection is not enabled, please select the disk you want to enable, click Configure, click Enable System Protection, and then click OK. (For system disks, we recommend that you set the disk space usage to 5% to 10%)
-
Use System Restore1, Select"Start answering the praise"button, and then on the taskbar"Get started"button next to the search box, type Control Panel, and then select ( Desktop Control Panel from the results)."。
-
Use System Restore1, Select"Get started"button, and then on the taskbar"Get started"button next to the search box, type Control Panel, and then select (Scream Desktop) Control Panel from the results"。2. Search for the control panel for recovery and select"Take a step under a rough bend. 3. Select the restore point related to the problematic app, driver, or update, and then select Next, and then select Finish.
1. Press the "Windows+R" key combination on the keyboard to bring up the "Run" window. >>>More
Win10 system runner fakes no response Solution 1: The application fails to load. >>>More
1. Click "System Restore" in the "System Protection" interface. >>>More
1Tap the "Start" button in the bottom left corner.
2. Click "Settings" - "Update & Security" "- Recovery" - Reset this computer "- Start". (If you can't enter the system, you can also try to force shut down twice, and the third boot will automatically enter the Windows RE repair environment). >>>More
Win10 to the latest version of the setting method, in fact, you did not receive the update notification just because of a simple setting, follow my method step by step to operate. Click to open the Start menu and find Settings from the left. Win10 upgrade update method, win10 upgrade to the latest version how to set. >>>More