The Xiaomi Mi 5 can t be charged when it is charged, the red indicator light keeps flashing, and it

1. The system of the mobile phone is faulty, which causes problems with the battery level display. This kind of problem is the easiest to solve, you can directly shut down and restart, which is equivalent to data refresh, and the general power display will return to normal.

2. The charger is faulty, which is the main reason why the mobile phone cannot be charged. Try it with a different charger. If it can be charged, then it can be concluded that the charger is faulty.

Solution: Replace the charger.

3. Poor contact between the charger and the mobile phone. This is also a common situation where the charger is not plugged in properly due to carelessness on the part of the phone user.

Solution: Swap sockets back and forth.

4. There is a problem with the mobile phone battery. Generally speaking, it is rare to have problems with your phone's battery. But once there is a problem, it is a big problem and must be taken seriously.

Therefore, when it is found that the charger and mobile phone system are not faulty, you should focus on checking the battery. If you find that the battery is swollen, then it means that there is a problem with the battery and you must stop using it immediately.

If the phone can't be charged, it is recommended that you replace the data cable and charger before trying, if it still can't be charged, it may be that the battery cell is faulty, then you need to go to the after-sales service for repair.

It is recommended that you:

1.If the phone automatically shuts down due to low battery power, it may not turn on when the charger is just plugged in, it is recommended to try to turn on again after charging for 15-30 minutes;

2.Check that the connection between the charger and the socket is secure.

3.Replace the charger and data cable separately, or replace the charger + data cable at the same time;

4.If you plug in the charger, the breathing light of the mobile phone can be lit up, and the battery icon in the upper right corner shows the charging status (green), but the battery power growth can not be clearly felt, which is generally caused by the low power of the power supply equipment, it is recommended to use the original adapter and data cable to try.

5.If you plug in the original charger and do not perform any operation, and the mobile phone is hot, it is recommended that you unplug the charger and take the mobile phone, the original charger and the data cable to the outlet for testing.

Measured, the battery is exhausted and cannot be charged with high voltage; If you plug in the computer with this low voltage for more than half an hour, you can turn it on. ’

1. If you are stuck in the white rice interface for a long time and there is no Android display at the bottom of the screen, it is recommended that you apply for after-sales testing;

2. If you plug in the original power adapter (charger) and the mobile phone heats up without performing any operation, it is recommended that you unplug the charger and apply for after-sales testing;

3. Press and hold the power button for more than 10 seconds to try to force restart;

4. Determine whether the shutdown is caused by too low power, if so, please use the original charger to charge for half an hour and then try to restart it;

5. If you are sure that the phone or tablet has power, press and hold the volume up + power button at the same time in the shutdown state, or press and hold the volume down + power button at the same time to see if you can enter recovery mode and fastboot mode, if you can enter the above two modes, press and hold the power button for more than 10 seconds when you are in both modes to try to restart;

6. If you press and hold for 10 seconds and still can't turn on, you can enter recovery mode to clear the data and try, please make a data backup in advance (if you turn on the Xiaomi Cloud service, you can log in to the Xiaomi cloud space to back up the data);

7. If the clear data is still invalid, and the mobile phone has been logged in to the Xiaomi account and unlocked the BL lock, you can try the miflash line brush, and make a data backup before the line brush;

If you charge it for more than two hours, you still can't start it, try other methods first, usually charge it like this, you can't turn it on, it's the phone that hasn't been used for a long time, or it's too bad to use electricity, the internal battery voltage is low, and you can't charge up the voltage, try to replace the charging head and data cable that are in normal use, and then try to turn it on, you can't turn it on, press the volume-key and the power button at the same time to see if you can start the REC engineering mode, if you don't even go into the engineering mode and don't respond, you can only find after-sales service, look at the replacement of the battery and brush the machine, Let's see if we can get it back.

Battery failure, generally caused by a serious deficit in power, resulting in a red flashing of the breathing light after plugging in the charger, if the screen does not turn on for half an hour, you can try to connect the computer interface with a data cable, and try to charge the mobile phone with a small current of the computer, if it still doesn't work, go to the after-sales service or disassemble the machine and charge the battery with the battery activation board.

Answer: In the face of the situation of "Redmi 5 charging indicator light is on but can't turn on", first of all, we should check whether the connection on the circuit board is loose, and secondly, check whether the battery is working normally and whether it can be charged normally. If all of the above is a problem, we can consider other reasons.

1.Check if the motherboard is working properly: Check that the circuitry on the motherboard is intact, if there is a burned area, you need to replace the motherboard with a new one.

Also, check if the power management chip on the motherboard is working properly, if not, it will also cause boot failure. 2.Check the system for damage:

If the motherboard, battery, and power supply are normal, you can consider whether the system is damaged, and you can repair the system damage by flashing the official system file. 3.Check if the keys are working:

If the keys are damaged, it will cause the phone to not turn on normally, at this time you can check whether the keys are normal, if there is a problem, you need to replace the new buttons. The above is the solution to "Redmi 5 charging indicator light is on but the track base can't be opened", through the above steps, we can solve this problem as soon as possible and let the phone turn on and use it again.

Summary. 1.Remove the battery, and after five minutes, connect the charger to charge for more than half an hour before it can be turned on.

2.Connect the charger to charge, the phone LED may not light up at first, after a few minutes the red light of the LED starts to flash and gets faster and faster, when the red light is no longer flashing and always on, it can be turned on.

What should I do if the indicator light keeps flashing red when the Xiaomi phone is charging, and it can't be turned on?

1.Remove the battery, and after five minutes, connect the charger to charge for more than half an hour before it can be turned on. 2.

Connect the charger to charge, the phone LED may not light up at first, after a few minutes the red light of the LED starts to flash and gets faster and faster, when the red light is no longer flashing and always on, it can be turned on.

What should I do if I can't turn on the machine when it doesn't flash.

Try the above methods to see if it works.

When the Xiaomi Mi 5 is charging, the reason why the red light flashes when it can't be turned on is that the phone's battery is too low or the phone's battery is damaged.

When the Xiaomi Mi 5 is charging, the specific solution to the red light flashing when it can't turn on is as follows:

The first step is to connect the computer with a data cable and charge it for 30 minutes.

The second step, if it still can't be turned on, replace a battery with more than 50% power to turn on, wait for the normal boot to complete and then turn it off, and then replace the previous battery.

Step 3: In the shutdown state, press and hold the volume plus key and the shutdown button, and let go when the boot screen appears, and you can enter recovery. Go to Recovery >Chinese>> >> Clear Data >> Empty all data.

A flashing red light is a warning that the battery is dead. It means that the electricity did not go in. Then the problem will lie in the data port, data cable, and data header. Change the data cable and see the effect; Change the charging head and see the effect. If it doesn't work, go to the after-sales testing data port.