How to shake out the water in the mobile phone, and what to do if the mobile phone is in the water

1.Wipe off surface moisture with a paper towel and cotton swab. After the mobile phone gets water, first turn it off, then use a paper towel to dry the moisture in a large area such as the mobile phone screen, and then use a cotton swab to gently absorb the water at the earphone hole, charging hole and speaker.

2.Rice and desiccant.

Water absorption method. After wiping off the surface moisture, you also need to absorb the moisture inside the phone, if you have desiccant at home, you can bury the phone in the desiccant, if you don't bury it with rice, you can probably wait for half a day to do it a day or so, wait for the phone to dry completely before you can try to turn it on.

3.Rice cooker steaming method. This method needs to be grasped more accurately to be effective, first heat the rice cooker, then adjust to the keep warm mode, and then wrap the watery mobile phone with newspaper, put it in the rice cooker, and use a dry and certain temperature environment to evaporate the water of the mobile phone.

But if it's not very necessary, don't try it, because it's easy to burn out your phone if you don't grasp it well.

If you use an OPPO phone after water or liquid ingress, in order to avoid further damage, it is recommended to deal with it according to the following methods:

1.Judge the power on and off status of the mobile phone, if the mobile phone is turned on, please turn it off immediately, if the mobile phone is turned off, please do not try to turn it on;

2.Take out the SIM card and memory card of the mobile phone in time, and remove the battery if the mobile phone is a removable battery;

3.Use a paper towel or cotton swab to dry water stains on the surface of the mobile phone;

4.If it is not cleaned after liquid ingress, it will accelerate the oxidation and damage of the internal components of the mobile phone, so it is recommended to send it to the customer service center for testing and repair as soon as possible.

Notes:1Please do not turn on or charge the phone after water ingress, at this time, powering may cause short circuit damage to the components of the mobile phone;

2.Please do not try to shake off the moisture by shaking the phone, this operation may cause the liquid to seep into other components;

3.Please do not use a hair dryer or oven to bake your phone, as high temperature and high heat may cause permanent damage to the components of the mobile phone (after the moisture inside the mobile phone is heated into water vapor by a hair dryer, etc., it may penetrate into other components of the screen, which will cause the mobile phone to get wet and damage the electronic components).

Summary. 1. Try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone. 2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

Method 1 of shaking the water out of the beam, please try to disturb the rental Qi, place the mobile phone in a dry and ventilated place, and use a paper towel to blot the water stains on the surface of the mobile phone. 2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on. 3. Please take out the SIM card and microSD card.

If the mobile phone accidentally enters the water, you can try the following ways to deal with the mobile phone urgently to avoid secondary injury: 1. Please take the mobile phone to a dry and ventilated place as soon as possible, and use a dry paper towel or towel to absorb the water stains on the surface of the mobile phone. 2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please remove the SIM card and microSD card as soon as possible. 4. Please bring your mobile phone to the after-sales department of the mobile phone brand for testing and processing as soon as possible to avoid unnecessary loss. Reminder:

1. Please do not shake or shake the mobile phone frequently after the water enters the mobile phone to avoid the spread of moisture inside the mobile phone. 2. Please do not bake with a hair dryer or stove after water ingress, so as to avoid liquid flowing into the inside of the mobile phone and damaging the mobile phone at high temperatures. 3. Some mobile phones can be turned on and used normally after simple processing, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try Wang Kuan to start the phone.

4. During the after-sales maintenance process, the data may be lost, it is recommended to ask the staff how to back up the data.

Look at this.

If the phone is flooded, you can turn on the vibration mode to shake the water out.

Place the phone on a horizontal surface, such as a table or floor, and use the phone's own vibration function to vibrate, about 10 to 15 minutes. During the time process, you can change the position of the mobile phone appropriately to promote the moisture to be shaken out. At this time, many people will worry about the phone dropping, and it is recommended to add a layer of cushion under the phone.

After the water is shaken out, we need to dry the phone again to allow the water to evaporate completely. You can use something that is more absorbent, such as a dry towel or absorbent paper, to absorb as much water as possible, and then put your phone in a ventilated and dry place. Be careful not to use heating devices such as ovens or hair dryers, as this can easily damage your phone.

Try to avoid using your phone, and wait until your phone is completely dry before trying to turn it on. If the phone still does not work properly, it is recommended to take it to a professional repair shop for repair.

Precautions for daily use of mobile phones

The mobile phone has to be reloaded and read every time it is turned on, and the loss of the mobile phone is compared, and the frequent switching on and off will increase these losses, resulting in the shortening of the service life of the mobile phone. In order to ensure the brightness of the flash, many mobile phones will have a large power setting, and if they are used too often or for too long, the loss of the mobile phone battery will be great, which will affect the service life of the mobile phone battery, and will also lead to the weakening of the brightness of the flash in the later stage.

Generally speaking, it is best to control the charging rolling time between half an hour and two hours to avoid overcharging. Using the original charger can ensure that the voltage is stable and avoid the problem of overvoltage. Also, it is not recommended to charge the phone when the battery is too low, as this will cause some damage to the battery.

In addition, it is recommended to avoid using mobile phone power banks as much as possible, because the charging time of power banks is generally relatively long, which will affect the life of the battery.

Hello: If your phone accidentally gets into the water, here are some emergency measures to shake the water out of the phone as much as possible: Take out the phone immediately:

Take your phone out of the water and try to avoid pressing any keys or charging jacks to reduce the risk of possible short circuits. Turn off your phone: Press the power button to turn it off, and never try to use your phone or press the screen to prevent damage to the circuit.

Remove the case and battery: If you have experience and know how to open your phone's case, remove the case and battery, this will help allow the moisture to evaporate. Wipe surface moisture:

Use a soft, clean cloth or paper towel to gently wipe the surface of your phone to remove as much external moisture as possible. Use gravity and vibration: Gently shake the phone to help moisture drain from the inside; You can also carefully place the phone on a paper towel, and then pat the back of the phone with your hand or a soft cloth to try to drain the water as much as possible, or you can shake the phone down with your hand for a while, and then use a hair dryer to blow it for a while, and then check that the water is not dry, and try to charge, if there is no problem with the boot, then it proves that the hand makes the phone intact.