The computer can t enter the system, and the self test speed is slow. 10

Let's go reinstall the system, it's better.

The reasons why the POST test is slow are as follows.

1. Loading too many startup programs at the time of booting will cause the boot self-test of the vertical hand computer to slow down;

2. The configuration of the hardware is low, and the low-configuration computer hardware will slow down the self-test speed when the computer is turned on;

3. If you do not regularly clean up the hard disk and the hard disk of the redraft, the memory occupied by the computer disk and hard disk will be too large, which will cause the computer to boot up the self-test slowly;

4. The operating system on the computer is not in good condition, and an unstable operating system will cause the computer to slow down the POST.

The reasons why the POST is slow are as follows.

1. Loading the startup program that is too knowledgeable and impulsive at the time of boot will cause the computer to slow down the boot self-test;

2. The configuration of the hardware is low, and the low-configuration computer hardware will slow down the self-test speed when the computer is turned on;

3. If the hard disk is not cleaned regularly and the hard disk is reorganized, the memory occupied by the computer disk and hard disk is too short, which will cause the computer to boot up the self-test to be slow;

4. The operating system on the computer is not in good condition, and the unstable operating system will cause the computer to boot up and self-test to slow down.

How to speed up the boot:

1.Computer boot startup items, optimized. Turn on 360 Security Guard - Boot Acceleration.

2.Usually use tools such as 360 Security Guard to clean up system junk and temporary files (IE cache) generated by surfing the Internet, and check and kill malware.

3.Try to set the IP address to a static IP address to reduce the boot time of the computer.

4.Don't put too many files and icons on the computer desktop, which will slow down the computer's response, and try not to install the software on the C drive. There are too many C disks, and you can also use 360 software housekeeper - toolbox - software to move and solve it.

5.Close some startup programs. Start-Run-Enter msconfig-OK-Click "Start" in the "System Configuration Utility" window-Start, except for the input method (ctfmon) and anti-virus software, the general program can be turned off.

360 Software Manager - Computer Acceleration, Intelligent Optimization Boot Acceleration.

6.It is recommended to install only one main antivirus software, as installing multiple will take up computer resources and make the computer slower.

7.Regularly defragment the disk, open my computer to defragment the disk - Properties - Tools - select the defragmented disk to open the "Disk Defragmenter" window - analyze - defragment - the system will start to defragment.

8.Periodically, take care to clean up the dust in the computer.

9.Regularly clean and optimize your computer.

10.The computer hard disk is used for a long time, it will also make the computer slower, repartitioning and installing can fix the logic is bad, the computer will be faster, and the physical read and write speed of the hard disk is slow, and it can only be changed to a better point! The memory module can also be erased down to prevent oxidation.

The system is used for a long time, the computer will definitely run slowly, not that the computer configuration is not good, but the computer garbage and plug-ins are too much, the boot startup project is too much, resulting in the computer card, and the slow situation, at this time, the best choice is to reinstall the system, reinstall the system, will only change the system in the computer C disk, like the computer D and E and F disk files and things will not be less.

According to your computer configuration, you can install the 64-bit operating system of win7. Use the computer hard disk to install the system, you can install the win7 system, the specific operation is as follows:1First of all, go to the ghost system base.

3.Open the unzipped folder, double-click "autorun", and in the window that opens, click "Install".Can.

4.In the window that appears, the ghost image file path will be automatically added, select the partition that needs to be restored to the virtual line, the default is the C drive, click the "OK" button to install it automatically.

It may be that there are too many background processes in the landlord's computer, or it may be that the computer garbage has not been clear for a long time.

Then click on the computer stove to speed up, optimize it after scanning, and then restart the computer, and you're good to go.

China's first, the first product that responds to the international mainstream and integrates anti-virus + management functions. Security service for 6 years, on the basis of the experience and professional strength of protecting hundreds of millions of netizens, it was born brightly.

An error occurred while installing the operating system.

1. Test it first.

Optical discs, optical drives.

Whether it is normal or not. 2. Clean the dust in the computer, clean the gold finger of the memory, graphics card and other equipment, reinstall the memory and other equipment, and check whether there is any problem with the hard disk connection.

3. If the system still cannot be installed, it may be a fault caused by the problem of hard shielding. Then use the replacement method to check the hardware failure, and replace the hardware after finding it.

4. If there is a problem with the hard disk itself, please install it into another computer and then use it"chkdsk

r"to check and fix disk errors.

If there is a failure when installing the operating system, such as a freeze, blue screen, reboot, etc., which causes the system to be unable to be installed, it should be caused by a hardware problem or a poor hardware contact.

Step 1: Clean the dust in the computer, clean the gold finger of the memory, graphics card and other equipment, reinstall the memory and other equipment, check whether there is a problem with the hard disk connection, and then reinstall the operating system.

Step 2: If you still can't install the system, it may be a malfunction caused by a hardware issue. Then use the replacement method to check the hardware failure, and replace the hardware after finding it.

Built-in disk repair method:

The specific steps are as follows (paragraph and travel to Windows

xp), select the drive letter in My Computer, right-click, and select it in the pop-up drive properties window.

Tools Start Checking" and select "Automatically Fix File System Errors" and "Scan and Recover Bad Sectors", then click Start, the scanning time will vary depending on the disk capacity and the scan stool options.

Disk Repair Software:

drivehealth

hddhealth

Russian hard drive repair tool pc3000v14

Efficiency source hard disk bad sector detection.

Professional hard drive detection and repair tool DDD-SI

hddthermometer