I use a network cable with my neighbor, why I get stuck when he plays

Method 3: Smash his computer.

PS: The above three methods are better when used at the same time!

The two of you share a network cable, and if he just plays games or something, you won't get stuck, and the main reason is that he consumes network resources such as watching movies.

You go into your router and see if your router has IP bandwidth control. If you have one, you can limit his internet speed.

If not, the next P2P terminator.

Let's see if your router has the ability to distribute traffic! See what route you use, what the general route IP is, or if you have this function, go in and set it up! And changed the password of the route so that he can't get in!

P2P terminators can't do it, this is the best way! Give it points!

So you're sharing broadband, and I suggest you talk to him about changing routers, so they don't affect each other, they don't have to be offloaded.

Pull a fiber optic network, use a router to divide the line, two or more people use it, and share the network fee, of course, it is possible, and the network cost can be diluted.

When multiple people use it at the same time, there may be a problem of competing for network speed, and then there is a lag phenomenon.

In fact, it is not certain, it mainly depends on what it is used for, and whether the router settings are reasonable.

If it's all used to surf the Internet or watch ** or something, then basically there is no problem, but when someone is playing a game, and someone is using ** software to watch a movie, the delay in playing the game will be relatively large.

If it's all about playing games, then the impact is actually not big.

In addition, as long as you set up the network speed allocation rules in the router, you can try to avoid the phenomenon of competing for network speed.

Pull the network cable together, first of all, you have to see how many megabytes of the network are pulled. If it's a hundred megabits, there will be no problem.

This will not be stuck and others will not be stuck when used on the same machine with a network cable, because it has a separate optical fiber and dial-up Internet access is different, so there will be no jamming.

It depends on how fast your internet is, and it's certain to pull and divert together, but if the internet speed is already fast, it shouldn't matter.

If it's 70M, you have to reduce the adaptation speed of the network card to 10Mbps, try it, and check your process.

There is no p2p software to reside! Such as Kugou, PPS, etc.!

The speed transmission distance of 100Mbps is about 100m, and if the cable is not very good, this distance will be reduced.

Low! Due to the attenuation of the signal, there will be more checks between computers, and it is possible that the network will be congested!

I don't know what line you pulled, is it a direct ** line? That is, the two-core cable that did not pass through the router? If that's the case, then there is.

You can go through the network cable, but this distance is a bit problematic, too long and the signal is not good, and there will be many unexpected problems.

If you are using the network cable now, then it should be a problem with the computer, because some computers have a strong ability to grab the network, you might as well swap the location of the computer to know.

It also has to do with the line, mainly because of the bandwidth.

Is the other party using Thunderbolt?,Maybe you didn't turn off the phone at night and continue to play things.。 The other party is not using it, you can see the port light of the router, as long as it is on and flashing, it must still be used.

Dear users, hello.

1.The bandwidth of the route you use to access the Internet. Everyone often refers to a few megabytes, which needs to go to the telecom company to handle, the more money is given, the more bandwidth is allocated, usually 1m, 2m and 4m.

2.The configuration of your computer or the quality of your computer's operating system. Generally, the configuration of the computer does not affect the network speed, if the configuration is too low, too many programs or software will be affected.

3.The rate at which your data port allows. Some may limit the port rate in order for everyone to be in a timely manner. At this time, no matter how large your bandwidth and high computer configuration are, it is useless.

5.The number of users connected to the network by local nodes means that everyone is slow when they are using the network, and fast when there are few people. Generally slower from late to o'clock.

6.The computer has a virus.

7.The load of the server, the heavy load of the server, the slow network speed; The load is light, and the network speed is fast.

8.The port is throttled.

9.System software affects such as firewalls, anti-virus software, 360 and so on.

10.Problems with the carrier's equipment.

China Telecom provides the best quality network communication services, old friends for new phones, Internet age cash, 100 Gigabit broadband free experience, ultra-clear TV ITV, telecommunications activities can be directly queried through the camp hall burying industry ambush hall.

How are you two connected? If it's shared, it's definitely card. It is recommended to install a router.

Splitting the speed of the Internet into two is equal to 1 Divide the speed of some software that can control the speed of your neighbor's Internet for free, or set a speed limit on the route, if you want.

Two companies with a network cable must be carded, the more terminals, the more cards, you set a limit in the router.

It should be that he occupies the bandwidth, and the speed limit is limited.