How long does it take to practice learning to enter the garage, and how long does it take to learn t

Phase 1. 3-7 days: Practice the basics.

1. Familiar with vehicles.

Many students who take the driving test are new to the part of the vehicle other than the co-pilot, so it is important to have a preliminary understanding of the car before learning to drive.

For example, simple car lights and the principles of car operation will help students to quickly master the exam skills when practicing specific projects later.

2. Clutch semi-linkage.

The importance of mastering the clutch is not much to say, it is recommended that you do not be lazy when practicing the clutch, and it is best to change a few more coaches to practice the foot feeling of stepping on the clutch.

To test your clutch mastery, it depends on whether you can maintain a slow and uniform speed every time you practice, and do not turn off the engine, and you must ensure that the success rate is 100%.

3. Repair the direction.

The clutch of each car is different, and the tightness of the steering wheel of each car is also different.

When there is a slight deviation in direction, it is important to correct the direction in time.

The basic principle of repairing direction: whether you are going forward or backward, you must play in the opposite direction which direction you are deviating.

4. Hang the gear. It is recommended to familiarize yourself with the gear position and gear method on the simulator of the driving school, and then get on the car to practice.

In subject 2, two gears are used: 1st gear and reverse.

As long as you formally practice the subject 2 exam items, it is enough to be proficient in the hanging method of these two gears.

5. Pull a straight line.

Pulling a straight line is to keep the car walking in a straight line slowly and evenly, and the direction is not offset, mainly to train the students' car feeling.

When it comes to the next five consecutive exercises, you have to adjust the car to the appropriate starting position before each event, and then everyone will realize the importance of straightening the line and feeling of the car.

Phase II. 8-12 days: Itemized exercises.

Memorize the dots and lines taught by the coach and find the one that suits you best;

The speed must be slow and even, but don't slow enough to stop halfway;

The principle of playing direction: it is better to be early than late;

Get used to looking at the rearview mirror, not only to see the highlights, but also to pay attention to the distance between the vehicle and the sideline.

1. Reversing into storage.

Reversing into storage is recognized as the most difficult project in subject two, the first 4-5 days, you can specialize in reversing into storage, learn how to correct the direction when reversing.

Before practicing other projects in the future, you can practice reversing and putting it into the warehouse to practice the feeling of driving.

Reversing into the warehouse, normal practice can be mastered in about 7 days.

There are three most common types of reversing, the first is the "non" type reversing into storage, which is commonly found in various hypermarkets. The second is the "one" shape on the side of the road reversing into storage, which is often referred to as side parking. The third type is the less common diagonal type of reversing storage.

Extended Materials. Reversing warehousing operation skills.

Control the driving speed and idle in 1st gear or reverse gear throughout the whole process, and drive at what speed you start.

In the process of controlling the timing of steering, we should observe carefully, grasp the key points of steering, and turn in a timely manner.

When controlling the driving route test, the driving route of the car mainly depends on the speed of turning the steering wheel and the driving speed.

At the beginning of learning to drive, walking in a straight line is just to familiarize the students with the vehicle. There is no set time before you can learn to restore, and you can generally learn to reload after a day.

Reversing into storage. 1. Scores.

Those who do not follow the prescribed route and sequence are not qualified; If the body is out of the line, it is unqualified; If the warehouse is not entered, it is unqualified; Those who stop halfway are not qualified.

2. Tips: 1When you start reversing, you will rotate the steering wheel to the right and a half, and observe the wheel above the right rearview mirror, which should be about 40 cm away from the right line of the garage, so as to ensure that the right side will not press the line when reversing into the garage.

2.Look in the left mirror, and when you can see the left line of the garage, immediately turn the steering wheel half a circle to the left and continue to reverse.

3.If you look at the left and right mirrors, there are solid garage lines on both sides, and when the distance is about the same, immediately turn the steering wheel back to the left and continue to reverse.

4.Look in the left rearview mirror until it completely covers the front of the garage and brake.

5.Don't rush to turn left when moving forward, and pay attention to the left side mirror when it coincides with the vertical line on the side, and then turn the steering wheel to the left and a half.

6.The precautions for storage on the left are the same as those on the right, except that the rearview mirrors to be observed are in reverse order.

Why does the instructor have to let you control the speed?

Some students have a good sense of driving, and they can master it quickly when they practice, and they will deliberately increase their speed in boring and repetitive movements, and feel that their skills are superb. But when it came time to take the exam, I didn't dare to "show off my driving skills" because I was nervous, so I slowed down the car! You must know that this is a big taboo, the speed of the car is different, and the timing and speed of hitting the steering wheel are also different.

If the speed of the car is too fast, the clutch is raised too high, and it is easy to stall and miss the point. If the speed is too slow, it is easy to cause stops. You are usually used to the fast speed of the car and you have to slow down the speed when you get to the test, and it is easy to have problems.

Therefore, the speed of the car should be as consistent as possible during the practice and the test.

Why spend a lot of time practicing reversing into storage?

The training of subject 2 basically starts from the restocking, because the reining is the most difficult, the most points, and the most difficult, as long as you practice other items in the rewarehousing, it will be easy. Moreover, in the process of learning to reverse and put into storage, the most common operations are to hit the steering wheel, gear and clutch, which is the most suitable for students to find the feeling of the car. In the practice of subject 2, reversing into the warehouse took up nearly 2 3 time, you should know that the arrangement of each class time in subject 2 is allocated according to the relevance of each subject and its degree of difficulty, which is both scientific and reasonable, and strives to teach everyone more driving skills in the limited practice time.

Why is it that I am usually very good at practicing, but when it comes to exams, I can't?

Since the implementation of the self-scheduled test, the appointment test has become more free, so many students are reluctant to take the test before the test. Subject 2 is the same car from beginning to end, so you are very familiar with the clutch operation of this car, but when you suddenly change to a different car during the exam, you will find that it always feels a little worse to drive. Therefore, in order to be more familiar with the test vehicle, during the test, you must first familiarize yourself with the semi-linkage of the clutch and adapt to it a few more times (remember to adjust the rearview mirror and seat), so as to better play what you usually learn.

Why don't you ask others if it's hard or not, and don't communicate too much with others before the exam?

Many students who have not yet taken the exam like to ask for "experience" from their seniors who have already taken the exam. Although it is definitely helpful to understand the test information and the weight of the vehicle with the students who have taken the test. But whether similar exams are difficult or not, don't ask questions such as whether they are good or not.

These questions need to be judged by yourself, don't listen to others about the difficulty of the exam, it will easily affect your exam mood! Because others have easy exams, you may let your guard down on exams; And when you have a difficult exam, it will invisibly increase the pressure. The conclusions drawn by others are only a reference for you, and they are completely useless for your exam.

After figuring out these reasons, you only need to do the following 32 words: control the speed, find the right time, lay a good foundation, beware of the line, be familiar with the vehicle, make adjustments, practice seriously, and believe in yourself.

How long does it take to learn to drive in storage? This, depending on personal talent, some people are smart, and it won't take long to practice, but some people are stupid, so they have to practice for a while.

If you learn it normally, you can learn it in three days, and if you are fast, you can be proficient in one or two days.

It mainly depends on the length of time you practice.

Generally, it takes 2-3 days to learn, but the coach usually goes to practice for a few days and reverses for a few days, and the coaches say that this is the most difficult.

Depending on personal ability, people with a good sense of car can learn it in one class, and some people can't learn it in ten classes.

5 minutes, the rest is practice, familiarization.

Keep an eye on the middle bar and the left front and rear corners of the vehicle after aligning back to the direction in time (look at the left front corner of the car when moving forward, and look at the left rear corner when retreating).

Before reversing into the warehouse, be sure to pull the straight line first, turn into the warehouse has a fixed point of view, practice a few more times according to this method, the first forward and backward vehicle has been basically corrected, the second forward and backward slight adjustment.

It takes a week to practice reversing into the warehouse. Generally, there are four classes a day to learn to reverse, and it takes about a week.

The judging criteria for reversing and warehousing: if the number is not driven according to the prescribed route and sequence, it is unqualified; The body is pressed and reversed, and it is unqualified; The potato dry source was not completed for more than 210 seconds, and the reversing was not completed, and it was unqualified; 5 points will be deducted for each stop.

Operation skills of reversing and warehousing: 1. Speed: control the driving speed with 1 gear or reverse gear throughout the whole process, what speed to start, and what speed to drive.

2. Steering timing: After controlling the steering timing, you should observe carefully during the reversing process, grasp the key points of steering, and turn in a timely manner. 3. Control the driving route

The driving route of the car mainly depends on the speed of turning the steering wheel and the driving speed, when reversing, it is necessary to look at the sideline, correct the direction in time, and keep the car upright into the warehouse.

Reversing and warehousing skills:

1. Reversing into the warehouse: left out of the warehouse.

The wheel crosses the stop line contact bar to stop, and the car is returning to the wheel. The front hood of the car coincides with the head of the 6-meter Minhe, and the steering wheel circles to the left.

2. Left inverted library:

Look under the left rearview mirror and circle to the left along the ground stop line.

3. Look at the left side of the rearview mirror and put the left body around the surface guide point, the distance is far to the left to hit the wheel, and the distance is close to the right to return to the wheel, and the adjustment wheel is put into storage.

4. When the body is parallel to the edge of the reservoir area, return to the steering wheel.

5. Look at the bottom of the left rearview mirror and stop when the horizontal line of the ground reservoir area coincides.

6. Right inverted library:

Look at the left rearview mirror and circle along the ground parking line to the right.

7. Look at the right side of the rearview mirror and guide the right body around the surface to enter the warehouse, the distance is far to the right to play the wheel, and the distance is close to the left to return to the wheel, and adjust the storage.