How can the Vertical Label Printer CP 2140 not print

Re-test the paper, if the font is not clear, adjust the printing density, or wipe the stainless steel on the print head of the pressed paper with alcohol.

The general printing work is carried out in the barcode printing software, using the label typesetting tool on the left side of the barcode software, the label content is designed and typeset on the canvas, and then connected to the Argox OX-100 barcode machine for printing. The following is a label as a column to demonstrate the steps of barcode printing software:

1.First of all, you need to install a Argox OX-100 print driver corresponding to the printer on the computer, after installation, press the paper walking key to see if you can come out of a finished paper, if you can come out of a complete paper, it means that the printer has been installed and set, if not, it means that there is a problem with the installation or setting of the print driver, and you need to restore the printer to factory settings and paper self-verification settings. According to your printer model, search for the corresponding factory settings and self-verification methods on the Internet.

2.Open the barcode printing software, click New, and in Document Settings - Printer Paper & Type, select Argox OX-100 barcode printer for printer. In Paper, customize the paper size.

Then set the number of rows and columns, page margins, set the size and spacing of the labels in the label size and spacing, and click Done without setting the starting position and direction, canvas and edges.

3.Click the "Solid A" button on the left side of the software, draw a normal text object on the canvas, double-click the normal text, in the Graphic Properties - Data Source, click the "Modify" button, select "Manual Input" for the data object type, and in the status box below, manually enter the information you want to add, click - OK.

3.Click the "Draw Line Segments" button on the left side of the software, and hold down the "Shift key" to draw lines on the canvas. If the line is thicker, you can double-click the line, and in Graphic Properties - Basic, you can set the line type (solid line, dashed line, stroked line, dotted line, dotted line), thickness (mm), color, etc., which can be customized according to your needs.

After the <> label is made, you can directly connect to the printer for printing, if there is a print offset or incomplete printing, you can check whether the paper settings in the software are consistent with the paper settings in the printer preferences, if the paper settings in the printer preferences do not have the size you need, you can click New, according to your label size to create a new size.

You can set the label sensor in the volume, if there is a spacing of labels, select the spacing of labels in the label sensor, if not, you can not choose it, after setting, click OK.

In the printing method, you can choose thermal or thermal transfer according to your needs, and after setting, you can click OK.

Summary. 1.Reinstall it and check if it has been installed incorrectly or if the ribbon is not in place.

2.Reinstall and check that the label stock is installed according to the normal path.

3.Some printers have a paper measurement method to perform paper measurement operations. Generally, you press and hold the "pause button" and then turn on the power, wait for a few seconds before releasing the button to automatically measure the paper.

Hold on. 1.Re-install the burial shed and check if it is installed incorrectly or if the ribbon is not in place.

2.Reinstall the liquid and check that the label paper is installed according to the normal path. 3.

Some printers have a paper measurement method to perform paper measurement operations. Liquid touch is generally to press and hold the "pause button" and then turn on the power, wait for a few seconds before releasing the button to automatically measure the paper. I hope it can help you, please click here for more troubleshooting solutions.

You press and hold the feed button in the shutdown state and turn it on again, and the paper starts to run before you release the feed

Hello:1Press and hold the "Feed" key while turning on the power until the printer motor starts. 2.The printer automatically sends out a label of a certain length to complete the paper measurement operation.

Note: If there is any error, please point it out, thank you. The automatic paper feed can be set in the driver.

CP3140L automatically outputs paper when it is turned on;

Solution, press and hold the feed button in the shutdown state and turn on again, and the paper starts to move before releasing the feed

1. Turn off the power of the barcode machine

2. Press and hold the pause calibration button on the left and right sides of the machine, turn on the power and wait for the paper and ribbon to start rotating, let go of the hand, and wait for the machine to finish, that is, it is completed.

Do calibration (repositioning), re-detect the label size once the barcode machine will automatically detect the paper and restart the barcode machine, it is not possible to rule it out, please troubleshoot the problem in the following order.

1. The size of the label set on the software is inconsistent with the actual label size (the software should be a little smaller than the actual size).

2. The light transmittance of the label is abnormal, please use the special label paper of the barcode machine, or use the way of see throgh for paper detection. ‍

You look at your paper spine setting page, the number of rows and rows or the size are set correctly, if the setting is not correct, the paper printing situation will also be incorrect.

For example, in the above case, two columns are set in time, and there may be no paper or only one column when printing, and there is already a hint of please adjust the preview above, this situation must be adjusted in advance, like the next Qin noodles**, when the number of columns is set 2, the horizontal spacing of the label has been set, and the preview on the right is normal, which can be printed.

The barcode printer is only responsible for printing, if you want to set the serial number, you need to cooperate with professional barcode software, in the barcode software can be used to generate or import the database to achieve the gradual increase or decrease of the serial number. After that, you can connect to a barcode printer for printing or output PDF documents for printing, and the following demonstrates the operation steps of barcode software to generate serial numbers.

In the barcode software, click the barcode button on the left side of the software, draw the barcode style on the canvas, double-click the barcode, in the graphic properties - data source, click the modify button, delete the default data, manually enter the desired information, and click.

Click the + button, select Sequence Generation as the data object type, set the start string to 1, and click Add.

In the processing method on the right, click the + button, select the processing method type to complete, the current length is 3, the filling character is 0, and the target length can be customized according to your own needs, and then click - OK.