Will there be formaldehyde in furniture store furniture after more than 10 months?

divide the situation, if solid wood furniture.

And there is not much paint on it, so the formaldehyde should be up to standard for 10 months of general ventilation. But if the furniture is made of synthetic panels.

It is very likely that the formaldehyde is still exceeded, especially after the room is closed for a period of time, it can still smell obviously. The release cycle of formaldehyde is 3-15 years, furniture is also one of the sources of pollution, formaldehyde exceeds the standard, headache and brain fever, and may lead to allergic leukemia.

Therefore, aldehyde removal is very important. Our home uses dialin aldehyde spray for furniture and wallpaper, and then puts Ye Guang mud in small spaces such as cabinets.

When my house was first renovated, it smelled for about three months. Still can't stay. Then I looked it up on the Internet to find out what kind of formaldehyde can be disposed of.

Then I learned that there is such a thing as Takekai Goddess Active Silicon. Formaldehyde can be removed efficiently. as well as all kinds of harmful substances.

The indoor air has also improved.

New furniture is formaldehyde, and formaldehyde-free homes in any market are formaldehyde-free, and no one can do it completely formaldehyde-free. It is recommended to buy some products that remove formaldehyde. For example, the diatoms in the Goddess of the Bamboo Sea*** are pure, which can efficiently remove formaldehyde in indoor air.

Absorb and break down.

First of all, this is a long-term process, it is not a matter of one or two years to completely disperse, and formaldehyde is colorless and odorless, if the formaldehyde is high, it is generally intuitively reflected in spicy eyes, dizziness and nausea, etc., and the odor you can smell is generally the smell of paint or veneer on furniture.

Furniture is now either solid wood furniture or panel furniture.

Formaldehyde in solid wood furniture mainly comes from two points:

The outside of solid wood furniture needs to be painted, which is the main formaldehyde of solid wood furniture.

Needless to say, good solid wood furniture is spliced, and some poor solid wood furniture is spliced, glued up and pasted outside, and there is formaldehyde where there is glue.

Panel furniture: The process of producing boards is different, the amount of glue used in the process is different, and the glue used by different manufacturers is also different.

Needless to say, the veneer of the board is naturally melted and pressed at high temperature, and some are glued.

The edge banding strip of the board, as above, has different processes, there are laser instantaneous high-temperature hot melting, and there are also glue.

Because the glue of the furniture is inside, there is a skin and edge banding strip on the outside, and formaldehyde is not easy to be emitted, so formaldehyde volatilization is a long-term process, so it is recommended to pay attention to the amount of formaldehyde released when buying.

Finally, you can put more greenery in your home and put some activated charcoal packets in your furniture to help eliminate odors.

The smell of home furniture is not necessarily the taste of formaldehyde, generally speaking, if it is really determined that it is the taste of formaldehyde, it has exceeded the formaldehyde standard, so it is recommended to do a special test.

Speaking of odor, it should be able to be disposed of, but the volatilization period of formaldehyde is very long (up to 5-10 years).

Generally, it is necessary to ventilate for at least a month before you can move in, and if you are in a hurry, you should also treat formaldehyde, please ask a professional company to be too expensive.

Suitable for home recovery.

The system of removing formaldehyde has just been renovated.

Small methods:1fenestration; Put some plants, you can put some green plants such as pothos and ivy vines, which can help absorb formaldehyde in the room.

2.Open the doors of drawers, wardrobes, cabinets, etc., wipe them with salt water a few times, and put some long-term adsorption of Ye Guang mud, which can adsorb and decompose formaldehyde in the cabinet.

3.You can put a fan to enhance air convection;

4.It is better to open windows in summer than in winter, and it is better to open windows during the day than at night (because the temperature is higher, the higher the humidity, the faster the formaldehyde will be dispersed.) ）

New buyers will have more formaldehyde to copy, yes.

The first system is placed for a period of time, and the later bai is placed

The material is then used to decompose.

1. Pay attention to some details to help remove DAO formaldehyde faster, so that you can take advantage of the high temperature environment in summer to speed up the volatilization rate of formaldehyde.

2. Plants have a strong ability to absorb formaldehyde, such as cactus, spider plant, reed, ivy, iron tree, chrysanthemum, etc. Generally speaking, plants with large foliage and vanilla have a good effect of absorbing formaldehyde, such as spider plant, tiger tail orchid, etc., and plant liquid herb formaldehyde scavengers are used to remove it.

3. Be sure to open all the furniture doors and drawers, open all the windows in the room, and add a few fans to accelerate the air convection effect.

4. Activated carbon: the use of Ye Guang mud material to adsorb polluting gas, effectively decompose the internal formaldehyde pollution, Ye Guang mud is different from the material of activated carbon, can be adsorbed after decomposition, will not adsorb saturation, and can be put more for long-term use if possible.

On how to get rid of formaldehyde from new furniture as soon as possible, you can try a few ways:

First, it is a good way to pass through the wind, but the release period of formaldehyde is 3-15 years, which is short-term ventilation and cannot fundamentally solve the problem.

Second, put some plants indoors, spider plants, ivy adsorption good, need large trees, small plants have limited adsorption capacity, more than two times the plant itself is difficult to protect.

3. Or use some photodiarin or photocatalyst materials, which are extracted from plants, which can enhance the photosensitivity of plants and improve the photosensitivity of photocatalysts. To make up for the weakness of photocatalysts, Diarin can also exert a very strong formaldehyde removal effect even in indoor environment, even in a very weak light environment.

Formaldehyde is tasteless Smelly are stupid harmful substances The only way to remove formaldehyde is to ventilate frequently Formaldehyde will be slowly released after ventilation It will be harmful to people when it is released to a certain concentration It is recommended to ventilate frequently, or install a millet fresh air system, which has fast ventilation speed and low cost!

With algae earth and activated carbon, these are good formaldehyde adsorbents, and there are many tiny pores in the material, so they can adsorb and decompose a lot of formaldehyde without secondary pollution. The adsorption of activated carbon will be saturated to a certain extent, and the effect will be worse, but it is cheap.

The release of formaldehyde will occur in the next three to five years, and it can reach more than ten years at most, and it is basically impossible to completely disappear, but you can use black blue stone to remove it, which can reduce the concentration of formaldehyde, black blue stone is much stronger than activated carbon, and it is not easy to be saturated.

Formaldehyde is basically difficult to disappear, it will only meet the living standard, I suggest that you can use croissanite to absorb, croissanite is made of natural ore, the absorption power is 20 times that of activated carbon, and the *** of Tmall Zhuhai Goddess is there.

The disappearance of formaldehyde in furniture is a long process, it is difficult to disappear under natural conditions, or to use Moqing stone, which can quickly adsorb and decompose formaldehyde, the adsorption is very good, and the *** of Tmall Zhuhai Goddess can be bought.

As high as 3-15 years of formaldehyde emission from furniture, why there is such a large span, because this is about the formaldehyde emission and external factors are closely related. The fastest formaldehyde release furniture is solid wood furniture, in which there will be basically no volatilization of formaldehyde, only the surface of the paint will have formaldehyde and benzene, the amount of formaldehyde released depends on the quality of the paint, generally speaking, 3-6 months are basically completely released.

Then the ecological wood board, the middle refers to the joint board, the surface of the board is paint-free, and glue can be used in the splicing, but the main component of the glue is formaldehyde. This sheet formaldehyde is released to 1-2 years.

The second is particleboard, in the middle is a large particle of sawdust completely bonded with glue, and then the surface is pasted with a paintless board, due to the use of a large amount of glue, the formaldehyde content is very high, and the formaldehyde release period is generally 3-5 years.

Finally, there is the MDF, which uses a lot of glue for the pressing of plant fibers. The highest formaldehyde content, the longest formaldehyde release cycle, usually reaches 3-15 years.

Formaldehyde release is most affected by the external temperature, the amount of formaldehyde released below 18 degrees is very small, almost no release, formaldehyde above 18 degrees begins to be released, and the formaldehyde release above 28 degrees will be released exponentially.

Therefore, when decorating and buying furniture, try to use some qualified products of big brands, and try to use solid wood panels. Some people may ask, is it not that the qualified products of big brands are not free of formaldehyde emissions?

In fact, if it is a qualified product produced by a regular manufacturer (furniture, curtain fabric, board, latex paint, flooring, etc.), it will not exceed the national environmental protection index, and the formaldehyde emission will definitely not exceed the standard for a single test. However, when all the products are concentrated in one space, a small amount of harmful gases emitted will gather in one space, and the limited space will be infinitely emitted, and over time, the harmful gases in the air will exceed the standard, just like the invisible killer lurking around you.

It is dangerous to use the body of your family to test for formaldehyde when you move into a new house, and you should not regret it when you are unlucky. The correct way to open the house is to find a formal professional indoor formaldehyde removal testing agency to conduct indoor air testing, and then deal with it accordingly according to the test results. Indoor formaldehyde removal testing institutions must focus on the company's strength and qualifications.

Formaldehyde testing agency is a professional qualification certification body that integrates formaldehyde and other decoration indoor formaldehyde harmful gas detection and treatment services, providing a strong guarantee for the prevention, detection and treatment of formaldehyde, benzene, toluene, xylene, TVOC, ammonia and other harmful gases after the decoration of new residences.

When can formaldehyde be dissipated in furniture is based on the formaldehyde content, and the formaldehyde content of different furniture is different. This is a long-term process, which generally takes about three months, and some solid wood furniture with poor materials even takes 1-2 years to disappear. After decorating the house, it is necessary to keep ventilation every day, and put some plants to remove formaldehyde.

Ventilation method: Frequent indoor ventilation is a more effective method, but it is too seriously affected by the weather, and the cycle of formaldehyde removal is relatively long, it is best to ventilate and cooperate with some other methods to achieve good results.

2. Lotting stone or activated carbon adsorption method: using the characteristics of the material gap itself to adsorb formaldehyde, the adsorption cycle is also relatively short, generally activated carbon 4-6 months, Lotting stone 1-2 months, activated carbon needs to be replaced once in about 20 days, and Lotting stone can be replaced once in about 3 years.

3. Air purifier: The cost is relatively high, and the best effect of an air purifier is to only adsorb formaldehyde in one room, but it is impossible for most families to put a purifier in one room.

Formaldehyde is colorless and odorless, and if you want to dissipate it all, it depends on the formaldehyde content of the furniture, such as the paint on the surface of the furniture or the glue in the material will release formaldehyde. This is a long-term process, generally about three months, some of the poor material solid wood furniture are spliced, is used glue to stand up, will produce formaldehyde, or even 1-2 years to dissipate. There will be formaldehyde in the glue and sealing strips used in the internal use of furniture, and it is not easy to disperse, and the process of formaldehyde emission is relatively long.

When the family buys new furniture and wooden beds, the formaldehyde content is generally exceeded, because many furniture will be coated with a layer of paint on the surface, and the paint contains harmful gases such as formaldehyde and benzene. To treat a period of time before you can move in, the general family will use the following methods to remove formaldehyde:

1.fenestration; Put some plants, decompose with some good photophyll materials, photocatalysts and the like can decompose formaldehyde when they meet light, and the industry is used to remove formaldehyde more, and photophyll is a formaldehyde catalyst extracted from plants, which will be faster and safer, and is generally used in family conditions.

2.Open the doors of drawers, wardrobes, cabinets, etc., and put some long-term adsorption of activated carbon and alcoid, which can adsorb and decompose formaldehyde in the cabinet.

3.You can put a fan to enhance air convection;

4.It is better to open windows in summer than in winter, and it is better to open windows during the day than at night (because the higher the temperature, the greater the humidity, the faster the formaldehyde will escape. ）

Formaldehyde is slowly volatilized, and it cannot be removed at one time, so ventilate it frequently.

For many polymerized formaldehydes, it is almost impossible to wait for them to be completely emitted, so we can choose to use some formaldehyde removal methods to speed up the emission of formaldehyde.

Here's how:

Generally speaking, every 600g of activated carbon can adsorb 10 square meters of formaldehyde, so for some wardrobes, bedside tables and other closed furniture, 1-3 pieces of coconut carbon can be placed to effectively absorb and decompose formaldehyde in attached furniture;

If you want to quickly decompose and adsorb at the same time, chlorinin sprayed on the surface of furniture can remove most of the formaldehyde substances in one week, which is effective for a long time. Home purification is simple and convenient.

It is important to note that:

In the newly renovated house, pregnant women and children should not be allowed to inhale formaldehyde, otherwise it will be extremely harmful to the body.

The furniture is more or less smelly, so the formaldehyde emission will be more, which is also normal, and you can first pass the wind to disperse the smell. After that:

1.Open more windows for ventilation and drying. If you have a balcony at home, you can put a smaller cabinet and other formaldehyde-containing things on the balcony when the weather is good.

2.You can raise more plants at home, such as pothos and spider plant, which have the ability to adsorb formaldehyde.

3.Do not use perfume or air freshener, which has no effect on the adsorption of formaldehyde, but only masks the smell of formaldehyde, and will cause secondary pollution.

4.Clean more when you have nothing to do at home, wipe the cabinet and furniture with salt water, and throw a few packs of Ye Guangni into it to absorb the formaldehyde released by the furniture, this will not be saturated, just put it in.

5.Curtains and other fabric things can be soaked in salt water and then washed off with clean water.