-
According to the design of the model, installation location and other conditions, the installation of fog lights can be appropriately considered.
Now family cars, especially the most advanced, basically have front and rear fog lights, no front and rear fog lights or related front fog lights no rear fog lights, rear fog lights no front fog lights, mainly some older models. Attention when installing:
1. There is an installation position, and there is a position for the installation of front and rear fog lights;
2. The installation position is based on the premise that it does not affect the existing position of other lights or interfere with the lighting area;
3. If it is an older model during installation, consider the line problem, and try to focus on separate control and independent lines;
4. If there is no suitable installation position, it is not recommended to drill holes or change the original body structure;
5. The installed anti-fog lamps are in accordance with the relevant standards or specifications of Hyundai Motor's "anti-fog lamps" to avoid causing line problems or other adverse consequences;
6. The selection standard of anti-fog lamps shall be based on the relevant specifications of automobile lamps and lanterns, and shall not affect the other party's oncoming car.
7. It must be installed by professional personnel, the circuit layout is reasonable, and the owner is easy to control (switch).
8. Meet the traffic safety specifications and the installation requirements and standards of driving lights on the road.
Not all models (no anti-fog lights) are suitable for installation, depending on whether the actual model design has a suitable installation location, whether the control is convenient, even if there is an installation location or does not affect other related facilities, it is necessary to hand over to professional electrical circuit technicians for construction, to avoid adverse consequences.
-
Jack up the wheels in the place, kill in the direction (in the opposite direction), and remove the fenders. Remember that there is a disassembly method in the manual, see if you disassemble it again and then install it.
-
Some of the 4S stores can be installed, but there are not many of them, and the outside decoration can also be installed. The price may be more than 1000, but the fog lamp is easy to burn the line, very simple.
-
How to modify the front fog lights of the car Fengshen H30 is as follows:
First remove the fog lamp panel switch, look for the required electrode connection wire, break the wire connection, there is a standard to solder, and then wrap it with insulating tape.
Step 2: Dismantle the fake lamp for the real lamp, due to the excellent standards of the car repair shop, in order to better facilitate the safety, the car is transferred to the top of a ladder, and gradually disassemble the fake front fog lamp. Disassemble and disassemble the triangle baffle under the front fog lamp.
Remove the screws, remove the fake lamp, install the real lamp, and fix it well. The disassembly on the other side is the same. Plug in the pants and mess up the front fog lamp hail Huiji connecting wire, wear the wire pipe outside, and gradually wiring it.
And fix the threading pipe well. Plug in the front fog lamp cable, fix the threading pipe, and walk along the edge of the rechargeable battery to the angle of the wiring hole in the cab. Wire from the engine cover to the cab, there is a rubber hose with water in the wiring hole, wrap it with tape at the cab, loosen the tape, and thread it with a thin wire.
The line comes to the cab, remove the front seat glove box, bring the line to the glove box, leave the line to the appropriate length, the third step: find the wire wiring, there is a small white box at the upper end of the glove box is the front fog lamp car relay fixed small box, remove the outer cover at the bottom, look for the third car relay that must be connected is the front fog light, look for the red bar below is the line to be connected.
Negative level hitch iron is fine. The Hu Shi gear connection is connected to the iron wire, and a nut is connected to the stable screw of the body. Finally, the wire is tied with a cable tie, the car relay cover is installed, and the glove box is installed, and the work of the front fog lamp is over. Query the actual effect.
Fengshen H30 front fog lamp bulb model specifications are H1, front fog lamp: the function of the front fog lamp is not to illuminate the lamp, just to give a high brightness of the natural light source, the compressive strength of this lamp source is to better penetrate the fog, with the effect of prompting the opposite driver, although it can light up a small area, but if it is applied in all normal situations, it is enough to make the eyes of the opposite driver dizzy. In such cases, turning on the front fog lights is an irresponsible personal act and it is proposed not to be applied in normal circumstances, but only in foggy situations.
Even in the event of a rainstorm, you only have to be close to the lights, and the front fog lights are not easy to bring you all the help.
Millions of car purchase subsidies.
-
Fengshen S30 front pass to 2 bulbs. Automobile headlamps are generally composed of three parts: a light bulb, a reflector, a light distribution mirror, and a diffuse mirror, and the light bulb is responsible for emitting a light source. The function of the mirror is to maximize the light emitted by the bulb into a strong beam to increase the illumination distance, and the cheating of the light distribution mirror is to refract the parallel beam reflected by the mirror, so that the road surface in front of the car has a good and uniform illumination.
Presentation of Fengshen S30The design of the whole vehicle is highly original, the appearance is not lacking in distinctive personality, the interior atmosphere is in line with the price and identity, the workmanship texture is reasonable, the engine technology from PSA is mature, the maintenance has a cost advantage, the interior space is ideal, the front and rear seats have good ergonomic design, the ride is comfortable, the chassis has reached a high level, the cornering control skills are good, the manual gearbox gear is clear, and the rental and late shift feel is good.
The automatic transmission from Japan, the perfection and reliability are guaranteed, and the whole system is equipped with a Zen car computer as standard, which is convenient for users who are concerned about fuel consumption performance, and the rear door side windows can be all lowered.
-
Fengshen S30 front pass to 2 bulbs. Automobile headlamps are generally composed of three parts: a light bulb, a reflector, and a diffuse mirror, and the bulb is responsible for emitting a light source. The function of the mirror is to maximize the light emitted by the bulb into a strong beam to increase the illumination distance, and the function of the light distribution mirror is to refract the parallel beam reflected by the mirror, so that the road surface in front of the car has a good and uniform illumination.
Presentation of Fengshen S30The vehicle design is highly original, the appearance is not lacking in distinctive personality, the interior atmosphere is in line with the price and identity, the workmanship texture is reasonable, the engine technology from PSA is mature, the maintenance has a cost advantage, the interior space is ideal, the front and rear seats have good ergonomic design, the ride is comfortable, the chassis has reached a high level, the cornering control skills are good, the manual gearbox gear is clear, and the gear shift feel is good.
The automatic transmission from Japan is guaranteed to be perfect and reliable, and the whole system is equipped with a driving computer as standard, which is convenient for users who are concerned about fuel consumption performance, and the rear door side windows can be lowered.
-
1. Start by lifting the metal wiper arm from the windshield.
3. Observe the position where the rubber wiper blade is in contact with the metal arm, there should be a small plastic plug to fix the blade in place.
4. Press down on the plug and remove the old wiper blade to separate it from the metal arm.
5. Insert the new wiper and gently turn the new wiper until the hook clicks into place to secure it.
6. Finally, put the wiper back on the windshield and replace the second one with the same one.
-
1. Headlamp height adjustment, first find the headlamp height adjustment knob on the left rear of the 2011 Dongfeng Fengshen S30 steering wheel.
2. At this time, it can be seen that the headlight height adjustment knob of the 2011 Dongfeng Fengshen S30 model is divided into four gears: 0 1 2 3.
Dongfeng Fengshen S30 model: headlamp height adjustment button, 0 gear is the lowest default gear.
The height adjustment button of the Dongfeng Fengshen S30 headlamp is slightly higher than the height of the 0th gear, which is adjusted according to the road conditions.
The height adjustment button of the Dongfeng Fengshen S30 headlamp is slightly higher in 2nd gear than in 1st gear, so be careful not to affect oncoming vehicles when using.
6. Finally, the headlight height adjustment button of the 2011 Dongfeng Fengshen S30 belongs to the highest gear and can be used in the suburbs without street lights.
-
It's very simple, Fengshen's wiper is a U-shaped structure, and there is a buckle on the U-shaped interface, and the buckle wiper can be easily removed when you open it.
-
Dismantle the original wiper, lift the wiper lightly, see the buckle in the circle, apply force to the orange arrow, and push the wiper along the direction of the green arrow.
-
First of all, the wiper should be completely erected, in order to avoid damage to the windshield during disassembly, it is recommended that the owner disassemble and install the windshield at the windshield pad a cloth. Prop up the wiper and change the wiper angle.
Second, change the angle of the wiper blade, preferably at a 90-degree angle to the wiper swing arm. Because the wiper blade and the swing arm are clamped with clips, it is easy to disassemble and assemble after being at a certain angle.
After putting it at an angle, you can start disassembling and disassembling it, first lift the rubber wiper blade with one hand, in order to expose the fixed hook of the wiper swing arm and the wiper blade. The wiper blade is removed as a whole, and the rubber wiper blade is broken horizontally with one hand below, and the other hand is pressed down the main bracket to separate the wiper blade from the swing arm, after which the wiper blade can be taken off as a whole.
-
Unscrew the screws, fold the wipers up, and then shake them left and right a little hard to loosen them.
-
Hello is this car [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
Summary. After opening the hood, in the internal test of the two headlights, there is an iron hook, on the back of the headlight, there is a plastic screw used to lock the headlight, unscrew the two plastic screws behind the headlight, store it, and then pull the iron hook outward to the end, and the headlight will naturally come out;
2. After the headlight is unloaded, you will find that the back is dragged by the wiring harness of the headlight, the headlight wiring harness is fixed by the card, touch the bottom of the joint with your hand, you can find the button, and you can exit the wiring harness by pressing it;
3. After removing the headlight, observe the base of the headlight and its method, the fixed guide rail in the middle is used to slide in or out of the headlight, the iron hook on the right is the locking device, pull out and release the headlight, and lock the headlight when you push it out;
How to disassemble the Dongfeng Fengshen S30 headlight assembly.
Hello, I'm Lao Ye, I'm happy to serve you, I'm sorting out the text, wait a minute.
After opening the hood, in the internal test of the two headlights, there is an iron hook, on the back of the headlight, there is a plastic screw used to lock the headlight, unscrew the two plastic screws behind the headlight, store it, and then pull the iron hook outward to the end, and the headlight will naturally come out; 2. After the headlight is unloaded, you will find that the back is dragged by the wiring harness of the headlight, the headlight wiring harness is fixed by the card, touch the bottom of the joint with your hand, you can find the button, and you can exit the wiring harness by pressing it; 3. After removing the headlight, observe the base of the headlight and its method, the fixed guide rail in the middle is used to slide in or out of the headlight, the iron hook on the right is the locking device, pull out and release the headlight, and lock the headlight when you push it out;
It's still musical. The repair cost is relatively cheap, and the appearance can also be hemp. Logo 207 and C2 are French cars, be careful when the time comes to change a small thing is a few hundred, I buy more Lefeng in Meishan. >>>More
Fengshen S30 - test evaluation advantages and disadvantages Advantages: Advantages: >>>More
Fengshen S30 Pentium B50 Roewe 550!! It can be regarded as the independent work of the three giants of China's car industry!! It will not disappoint the Chinese people, and Dongfeng is the second automobile, which made China's first passenger car 50 years ago!! >>>More
Do you mean 30 inches? I think a 30-inch TV is a bit too small for now. If you put it in your home, it may not look very good.
The Elysee vehicle continues the characteristics of solid leather and durability, and the overall configuration has a high cost performance. The appearance of the car is thick, the chassis is stable, and the appearance of the gold, materials, paint, and resistance to blows is strong. In addition, the car has good handling performance, sufficient power and fast acceleration. >>>More